Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Spring came off and cannot get the top up to replace it. Series 80 washing machine top load

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kenmore Master
  • 2,290 Answers

Remove the two screws that hold down the top console,flip up the console,it's on hindges,with a screw driver pop the two metal clips,stick the screw driver in the hole and push back and the clip will release,also there's a white plastic wire harness in between the clips,that's the lid switch connection,unplug it.open the lid,grab the frame and pull back and up and remove the outside frame.if the spring fell off the back of the washer and the tub is bouncing all around,most likely the hole in the frame rotted and you'll need to drill a new hole,hope this helps,let me know how you make out

Posted on Aug 28, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore Series 80 (8543549) top load washer. It will fill, but not agitate or spin or drain or anything else. The knob does not advance except manually. What component is causing this problem?


if its a top load which i believe a series 80 is,then you need to replace the lid switch to make it operate again,its located under the control panel,some can be replaced from the top,but some need to have the outer case removed to replace this switch

Jul 04, 2011 | Kenmore Washing Machines

2 Answers

How do you remove the top off the washing machine to replace the lid switch in a kenmore super capacity 80 series?


The following link explains step-by-step how to replace the lid switch on a Kenmore top loader:

http://www.fixya.com/support/r3557193-replacing_a_lid_switch

If you have any questions about this repair, please post back and let me know. I hope you find this information helpful.

Oct 26, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

I have a series 80 top loader. It filled and


Screws holding the lid switch was broken. Had to replace lid switch.

Jun 11, 2009 | Kenmore 24902 Top Load Washer

3 Answers

I have a kenmore washer 80 series that over flowes help please


I had the same problem with a 90 series and there is a small hose connected to the water level knob that had slipped off.

Jan 21, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore 80 Series Top Load Washer not agitating


Check out this you tube. Had the same problem today. Tipped washer on its side and replaced coupler between motor and gearbox. Parts are about $15
This is a good diagnosis video.
http://www.youtube.com/watch?v=VYOP0_KCYT0

Sep 02, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

My Kenmore 80 series washer shakes uncontrollably in spin cycle.


try this
the washer needs to be leveled on a flat surface to properly function rock forwards then backwards
washing machine have stablizers on there leg pegs this insures it has a proper setting on floor
if this did not help there is a spring under neith that you did not load back to bucket to keep in place
most likely it just needs to be rocked you will know if pegs are seated properly

May 07, 2008 | Kenmore 24902 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2287 Answers

fordexpert

Level 3 Expert

5537 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...