Question about Midland M222P (22 Channels) 2-Way Radio

1 Answer

Help, Kids 2 way radios not working

I dont have manuel. I have a music note on top left side , that I need to get off, and a voice symbol on top right side that I need to get off

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 127 Answers

Http://safemanuals.com/ try this if it helped please rate me.

Posted on Jul 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I cannot set QT filltering on..why?


Here are the instructions from the manual:

To transmit to a radio that has QT noise filtering turned on:

1. Select the same channel and Interference Eliminator Code as the other radio.

2. Press 'musical note' button to send a call tone. This allows your voice to pass through the QT

noise filter on the receiving radio.

3. Press the PTT and speak normally.

Note: If you skip step 2, the beginning of your message may not be heard on

the receiving radio.

For a 30-second period, starting after the last transmission, all transmissions
received on the selected channel and code will pass through the QT noise filter.

Also, your QT filtering will NOT work if you are in scan mode.

http://www.giantintl.com/RadioPDFs/Outdated%20Manuals/T56XX_57XX_User_Manual_E.pdf

Best regards.

Aug 06, 2011 | Motorola Talkabout T5720 (7 Channels)...

1 Answer

I have the uniden 1558-CK2 walkie Takies for my kids and ond of the radios has the "rx" symbol on the screen lit on and the radio will not transmit to the other radio. what can I do to resolve...


Hello,
It would seem the radio has found it's way to monitor mode. What this does is monitor for more weaker signals. You can undo this easily.
  1. All you will need to do for this is press the "mon" button and this will return you to normal mode.
  2. The "rx" (receive) icon stops blinks and disappears.
  3. You will now have normal functions of your radio.

Regards, Tony

Apr 24, 2011 | Uniden GMR-1558 / 2CK 2-Way Radio

2 Answers

I have two uniden GMR1088-2CK radios, If I press the transmit button on the side and speak into the Mike you can see tx appear in the display, the 2nd unit receives the call, rx appears in the display and...


Hello,

What this code indicate mean that your radio have have been compress with power however the can also be an indication of lower power supply but most of the time is always power compress.

What you need to do to solve this code problem is to put off the radio for some time allow it relax, then remove the battery if possible after some time replace it if you are able to remove the battery then put on the radio and operate it.

Good luck.

Jan 15, 2011 | Two-Way Radios

1 Answer

Radio will not transmit, display seems wrong


Here is a link to the user manual for the SV600R. http://www.giantintl.com/ContentManage/manuals/Moto/SX600%2012-21-07.pdf Follow the instructions to reprogram the affected radio. Note: The problem you are describing may not be simply programming. The radio problem may be non-reversible. You might also try a new battery, or switch the battery from the other unit for a test, just to see if the battery is bad.

Jun 07, 2009 | Motorola SX600R Two Way Radio

1 Answer

Voice activation


The Motorola T-5000R does not have VOX capabilties. Page 23 in the manual explains this.

Here is the Link: http://www.giantintl.com/ContentManage/manuals/Moto/T55xx.pdf

HiTech Wireless

Mar 18, 2009 | Motorola Walkie Talkie 2-Way Radio

3 Answers

2 Way Radios not talking to one another


Kids will be kids, and if you also remember back when you were a kid, you probably did the sames things the kids did. (I know I did)
Kids like to play with the knobs, push buttons, turn the dial...Maybe if you checked to see that Both radios are set to the same frequency.
Check the Channel & Interference Eliminator Codes. The dials are located under the battery compartment.
Good Luck, and don't yell at them...........

Nov 09, 2008 | Motorola Talkabout T5210 2-Way Radio

2 Answers

Safety


hi there

how old are the kids? kids holding screwdrivers is a no no without someone watching over them.

Opening the radio is fine, but avoid Choking hazards like the screws, internal components ...etc.

if the battery is still present, dont give it to the kids to avoid chemical poisoning.

hope this helps.

Feb 05, 2008 | Two-Way Radios

1 Answer

I NEED TO UNLOCK MY KENWOOD 2 WAY RADIO, I WILL PAY


Hello Jack. To unlock your radio:

turn power off

while pressing the mode key, turn the power back on

I also left you a voice mail on your cell phone with this solution.


Dean
Rollin CBs

Jan 27, 2008 | Kenwood ProTalk UBZ-LF14 (14 Channels)...

3 Answers

Bell South 2250 one seems to be voice activated and other not voice activated.


To turn off sound activation press the menu button 3 times to enter VOX mode. The VOX icon should be flashing, then press the down button till the number of bars dissappear. Press the menu button to confirm the VOX off mode. You also can adjust the sensitivity of the VOX mode by how many bars are displayed, less bars equal less sensitivity. No bars and voice command is deactivated. Hope this helps. 

Nov 24, 2007 | BellSouth 2250BK (22 Channels) 2-Way Radio

Not finding what you are looking for?
Midland M222P (22 Channels) 2-Way Radio Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Midland Two-Way Radios Experts

Iron
Iron

Level 3 Expert

3018 Answers

eradiostore
eradiostore

Level 3 Expert

1640 Answers

freddyfox

Level 2 Expert

236 Answers

Are you a Midland Two-Way Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...