Question about Computers & Internet

Ad

Push the "mode" button and look at the third row. you should propably have it standing on "Radian" instead of "Degree".. It was a few years since i used my TI-83 but i remember thath ther's a difference between those two!!! =P

Posted on Aug 25, 2010

Ad

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

New users get **2 Free calls** (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).

click here to download the app (for users in the US for now) and get all the help you need.

Goodluck!

Posted on Jan 02, 2017

Ad

Your right you should be in degree mode. However, my guess is you are somehow entering in cot wrong in your calc. Recall cot = 1/tan! In your graphing calculator enter: 35(1/tan(61) = 19.4.

Hope this helped!

Hope this helped!

Jul 09, 2014 | Texas Instruments TI-84 Plus Calculator

Not directly. The calculator does not have the trig functions built in. You could do it the same way people did it before pocket calculators.

Feb 12, 2014 | Texas Instruments TI-15 Explorer...

Not directly. The calculator does not have the trig functions built in. You could do it the same way people did it before pocket calculators, but you can't do it just be pushing one or two keys on this calculator.

Feb 12, 2014 | Texas Instruments TI-15 Explorer...

The basic trig functions are on the first full row of keys below the circular cursor pad, labeled "sin", "cos", and "tan" for sine, cosine, and tangent.

Aug 11, 2012 | Casio FX9750GII Graphic Calculator

You can see on the images below graphs of the function **y=tan x** and **y=arc tan x** and calculations for your problem

**y=tan x**

y=arc tan x

y=arc tan x

Mar 18, 2012 | Texas Instruments TI-Nspire Graphic...

You're in radians mode. The tangent of 30 radians is about -6.4.

To switch to degrees, press MODE to bring up the mode editor. Use the arrow keys to move down to the third line, highlight Degree, and press ENTER. Press 2ND [QUIT] to exit.

To switch to degrees, press MODE to bring up the mode editor. Use the arrow keys to move down to the third line, highlight Degree, and press ENTER. Press 2ND [QUIT] to exit.

Sep 24, 2010 | Texas Instruments TI-84 Plus Calculator

The hyp key is used with the cos, sin, and tan keys to compute the hyperbolic cosine, hyperbolic sine, and hyperbolic tangent functions (and their inverses).

The hyperbolic functions are computed the same way as the trignometric functions: simply press the hyp key just before pressing the desired trig key.

The hyperbolic functions are computed the same way as the trignometric functions: simply press the hyp key just before pressing the desired trig key.

May 04, 2010 | Casio FX-300MS Calculator

because cotangent, cosecant, and secant are all inverse trig functions, just type in 1 / |shift| trig function and the number if you are finding the angles. It might not be a dedicated button, but its an extra push, and it will give you the same result. *note that I put the shift press only because that is how you get the inverse tan to get an angle from a tan ratio.*

May 04, 2009 | Casio FX-270W Calculator

The 3 trig functions most commonly

used in triangle calculations are

sine = Opposite/Hypotenuse Co secant = Hypotenuse/Opposite

Cosine = Adjacent/Hypotenuse The reciprocals are Secant = Hypotenuse/Adjacent

Tangent = Opposite/ Adjacent Cotangent = Adjacent/Opposite

Hope this helps Loringh

used in triangle calculations are

sine = Opposite/Hypotenuse Co secant = Hypotenuse/Opposite

Cosine = Adjacent/Hypotenuse The reciprocals are Secant = Hypotenuse/Adjacent

Tangent = Opposite/ Adjacent Cotangent = Adjacent/Opposite

Hope this helps Loringh

Oct 12, 2008 | Measuring Tools & Sensors

Put the calculator in radian mode and it will graph trig functions just fine. If you don't know how to change it to radians, then go to mode and cursor over to select radians. I am assuming you know where the sine, cosine, tangent, etc. keys are.

Dec 31, 2007 | Texas Instruments TI-84 Plus Silver...

Nov 21, 2017 | Computers & Internet

22 people viewed this question

Usually answered in minutes!

×