Question about Computers & Internet

1 Answer

I cannot open an attachment and the sender said I needed adobe 7...how do I get it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 31 Answers

Yes, sender must have sent you an attachment in PDF format. To view this kind of file you need to have acrobat application installed in your computer. Go to google and type "acrobate 7 download" and hit search button. You will see link to download acrobate 7 free download. Clink on the link and download the application and save it in computer. After downloading double-click on the downloaded application, accept the license agreement and clink on next to continue installing it. This should allow you to view the attachment.

Posted on Aug 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adobe acrobat reader


Try to download the file again or if it was sent to you via email, have the sender verify they can open the file & resend it. There are tools you can use to try to fix problems in PDF files, but they should be used as a last resort since they cannot fix all errors without data loss or corruption.

Sep 03, 2014 | Computers & Internet

1 Answer

Had windows 7 reinstalled and Adobe,but can't get document attachment to open in emails. it opens up on windows media center how do i get it to open with Adobe instead


Save the file to your desktop first. Then right click and select open with. Find the program you want to open the attachment with and select 'always use this program for this type of file'. That will reset the file association and you will then be able to open them from your email in the future.

Nov 19, 2013 | Microsoft Windows 7 Home Premium 64BIT...

1 Answer

Cannot open my emails


Which email acc.????...
Windows Live Hotmail allows users to view attachments within a Web browser or save them to the system's hard drive.
If Hotmail can't open an attachment, the problem lies with an incompatible file format or Hotmail's automatic blocking service.
You may need new software for opening unfamiliar formats, while blocked files are permanently inaccessible from within Hotmail.
Accessing these files requires action by the sender or forwarding the file to a different email client. Incompatible File Format
Occasionally a sender may attach a file that simply doesn't work with any software you have installed on the system.
Attempting to open the attachment will result in a "Windows cannot open this file" message or similar error display.
Many programs use very specific file formats that don't operate with most other software, such as Photoshop's PSD image files or Microsoft PowerPoint's PPT files.
Ask the sender to convert the file to a more widely compatible format, or install the appropriate software on the system to open the attachment.

Blocked Attachments
Hotmail blocks attachments it believes may contain unsafe or otherwise malicious code.
This includes any and all executable file types, including MSI, EXE, HTML, STC and COM files, along with many others.
Attachments blocked in this way result in a "Windows Live Hotmail has blocked some attachments" message when viewing the email.
While this service does block many real threats to system security, Hotmail may occasionally deny access to an item from a trusted sender.
Unfortunately, these files become permanently inaccessible once blocked by Hotmail, and accessing them requires using a workaround outside the Hotmail application.
Only attempt to access attachments you trust as safe.


Forward Workaround While Hotmail cannot open blocked attachments, it allows users to forward the message with the blocked file still attached.
Send the file to a different email client, and open the attachment using that account instead. Note other clients may have different security measures, but some will still block access to executable files and other potentially harmful data.

Compression Workaround

Ask the sender to package the attachment into a ZIP, RAR or other compressed file format before attaching.
Hotmail will not block any file type located inside a compressed archive.
Both Windows and OS X can create compressed ZIP files, and free utilities such as Zipeg and 7-Zip can create many other types of archives as well.
Some email clients, such as Gmail, will not allow users to send some file formats, even when packaged into an archive file.


http://windows.microsoft.com/en-US/windows7/Compress-and-uncompress-files-zip-files


http://ask-leo.com/windows_live_hotmail_has_blocked_some_attachments_how_do_i_get_around_that.html

Aug 24, 2013 | Computers & Internet

1 Answer

I can sign in to Hotmail, but I can't open any of the messages


Windows Live Hotmail allows users to view attachments within a Web browser or save them to the system's hard drive.


If Hotmail can't open an attachment, the problem lies with an incompatible file format or Hotmail's automatic blocking service.


You may need new software installed on your computer IE: adobe . direct x , zip for opening unfamiliar formats, while blocked files are permanently inaccessible from within Hotmail.


Accessing these files requires action by the sender or forwarding the file to a different email client.


Incompatible File Format


Occasionally a sender may attach a file that simply doesn't work with any software you have installed on the system.


Attempting to open the attachment will result in a "Windows cannot open this file" message or similar error display.


Many programs use very specific file formats that don't operate with most other software, such as Photoshop's PSD image files or Microsoft PowerPoint's PPT files.


Ask the sender to convert the file to a more widely compatible format, or install the appropriate software on the system to open the attachment.


Blocked Attachments


Hotmail blocks attachments it believes may contain unsafe or otherwise malicious code.

This includes any and all executable file types, including MSI, EXE, HTML, STC and COM files, along with many others.


Attachments blocked in this way result in a "Windows Live Hotmail has blocked some attachments" message when viewing the email.


While this service does block many real threats to system security, Hotmail may occasionally deny access to an item from a trusted sender.


Unfortunately, these files become permanently inaccessible once blocked by Hotmail, and accessing them requires using a workaround outside the Hotmail application.


Only attempt to access attachments you trust as safe.

Forward Workaround


While Hotmail cannot open blocked attachments, it allows users to forward the message with the blocked file still attached.


Send the file to a different email client, and open the attachment using that account instead.


Note other clients may have different security measures, but some will still block access to executable files and other potentially harmful data.


Compression Workaround


Ask the sender to package the attachment into a ZIP, RAR or other compressed file format before attaching.


Hotmail will not block any file type located inside a compressed archive.

Both Windows and OS X can create compressed ZIP files, and free utilities such as Zipeg and 7-Zip can create many other types of archives as well.


Some email clients, such as Gmail, will not allow users to send some file formats, even when packaged into an archive file.


Hope this helps

Nov 04, 2012 | Computers & Internet

1 Answer

Why won't attachments open


There are a few reasons why the attachment might not open and appear correctly:

* You might have problems viewing an attachment if your browser is not properly configured to view that type of file. Usually, the easiest solution is to upgrade your browser to the most recent version:

Download the Firefox browser at:

http://www.mozilla.com/firefox/

Download the Internet Explorer browser at:

http://www.microsoft.com/windows/ie/down...

* If you're having trouble reading an Adobe PDF file, you'll need to install the Adobe Acrobat Reader, which allows you to open and read these types of files. For more information, visit:

http://www.adobe.com/products/acrobat

* You might also have problems viewing an attachment if it was sent in an unreadable "encoding type." When a message is sent, the sender might be able to choose an encoding type. If possible, the sender should use MIME encoding.

Nov 24, 2010 | Yahoo Mail

1 Answer

How long does it take to replace both fuel tanks?


2000 Chevrolet Corvette V8-5.7L VIN G

Fuel Pump: Service and Repair
REMOVAL PROCEDURE (LEFT OR RIGHT)
TOOLS REQUIRED
^ J 34730-1A Fuel Pressure Gauge
^ J 37088-A Tool Set, Fuel Line Quick Connect Separator
CAUTION: Refer to the Battery Disconnect Caution in Service Precautions.
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to the Fuel Pressure Relief Procedure.
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
4. Remove the rear wheel and tire assembly.
5. Clean all of the fuel connections and the surrounding areas before disconnecting the fuel pipes in order to avoid possible contamination of the
fuel system.
6. Drain the fuel tanks. Refer to Fuel Tank Draining Procedure.
7. Remove the fuel tank shield.
8. Mark or identify each fuel pipe in order to aid in installing the pipes in their original positions.
9. Disconnect the quick-connect fittings from the fuel sender.
10. Cap all of the fuel pipes.
11. Disconnect the fuel sender electrical connector.
12. Remove the fuel tank strap.
13. Support the fuel tank.
14. Remove the fuel sender attaching bolts. Remove previously installed "break-away head" service bolts using a 5/16 inch open end wrench.
15. Discard the fuel sender attaching bolts.
16. Remove the float arm retaining clip and the float arm (left fuel sender only).
17. Carefully remove the fuel sender with the gasket.
18. Discard the fuel sender gasket.
19. Clean the gasket sealing surfaces.
INSTALLATION PROCEDURE (RIGHT)
CAUTION: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always replace the fuel sender gasket
and the fuel sender attaching bolts when reinstalling the fuel sender assembly.
1. Install a new fuel sender gasket on the fuel sender.
2. Fold the long strainer in half over itself and hold the strainer in this position.
3. Pinch both strainers upward toward each other.
IMPORTANT: Do not bend or twist the float arm.
4. Insert the float arm through the fuel tank opening followed by the folded strainers.
5. Release the strainers once the strainers are in the fuel tank. The strainers will spring back to their full position.
6. Continue inserting the fuel sender through the fuel tank opening. It may be necessary to rotate the fuel sender in order to facilitate the installation.
6.1. Look through the fuel tank opening to ensure that the long strainer is visible.
6.2. If the strainer is not visible, rotate the fuel sender clockwise and counterclockwise about 90 degrees. Rotating the fuel sender will free up
the strainer. The strainer should become visible at the tank opening.
7. Align the fuel sender gasket tab (2) with the fuel sender cover mark (1).
8. Align the fuel sender cover mark (1) with the fuel tank mark.
NOTE: Refer to the Fastener Notice in Service Precautions.
9. Hand tighten the new "break-away head" fuel sender attaching bolts until finger tight.
IMPORTANT: The upper hex head portion of the fuel sender attaching bolts is designed to shear off of the lower section of the bolt when the
proper torque is reached. Do not tighten the bolts after the bolt heads have sheared off. A torque wrench or other special tools are not required. Do
not use thread locking or other types of sealers or lubricants when installing these bolts and gasket.
10. Tighten the new "break-away head" fuel sender assembly attaching bolts in sequence until the upper hex head portion of the bolts shear off of the
lower section.
11. Connect the fuel sender fuel feed pipe (1) (jet pump to left tank) and the fuel feed rear crossover pipe (2) (left tank to jet pump).
12. Connect the fuel sender electrical connector.
13. Install the fuel tank strap (3).
14. Install the fuel tank strap bolts (1,2,4).
Tighten
14.1.Tighten the bolt (2) to 25 N.m (18 lb ft).
14.2.Tighten the bolt (1) to 25 N.m (18 lb ft).
14.3.Tighten the remaining bolts (4) to 25 N.m (18 lb ft).
15. Install the fuel tank shield (1).
16. Install the fuel tank shield mount bolt (2).
17. Install the fuel tank shield mount nut (3).
Tighten
^ Tighten the fuel tank shield mount bolt to 25 N.m (18 lb ft).
^ Tighten the fuel tank shield mount nut to 12 N.m (106 lb in).
18. Install the rear wheel and tire assembly.
19. Lower the vehicle.
20. Refill the fuel system.
21. Install the fuel filler cap.
22. Connect the negative battery cable.
23. Inspect for leaks.
23.1.Turn the ignition switch ON for 2 seconds.
23.2.Turn the ignition switch OFF for 10 seconds.
23.3.Turn the ignition switch ON.
23.4.Inspect for fuel leaks.
24. Program the transmitters. Refer to Transmitter Programming/Synchronization in Keyless Entry.
25. Perform the idle learn procedure. Refer to PCM Idle Learn Procedure.
INSTALLATION PROCEDURE (LEFT)
IMPORTANT: Always install a new fuel pump strainer before reinstalling the left fuel sender assembly. A fuel pump strainer that has been
exposed to fuel will not unfold in the fuel tank and may block full travel of the float arm.
1. Install a new fuel pump strainer in the same position as noted during disassembly. Push on the outer edge of the strainer ferrule until the strainer
is fully seated.
CAUTION: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always replace the fuel sender gasket
and the fuel sender attaching bolts when reinstalling the fuel sender assembly.
2. Install a new fuel sender gasket on the fuel sender.
3. Fold the strainer three times so that the amount of space occupied by the strainer is about equivalent to the diameter of the fuel sender reservoir.
3.1. Fold the long side of the strainer over (1 over 2).
3.2. Fold 3 over 4 and hold the strainer in the folded position.
4. Insert the fuel sender through the fuel tank opening.
5. Release the strainer once the strainer is in the fuel tank. The strainer will spring back to its full position.
6. Continue inserting the fuel sender through the fuel tank opening. It may be necessary to rotate the fuel sender in order to facilitate the installation.
6.1. Look through the fuel tank opening to ensure that the long side of the strainer is visible.
6.2. If the strainer is not visible, rotate the fuel sender clockwise and counterclockwise about 90 degrees. Rotating the fuel sender will free up
the strainer. The strainer should become visible at the tank opening.
IMPORTANT: Do not bend or twist the float arm.
7. Insert the float and the float arm into the fuel tank opening.
8. Install the float arm retaining clip.
9. Align the fuel sender gasket tab (1) with the fuel sender cover mark (2).
10. Align the fuel sender cover mark (2) with the fuel tank mark.
NOTE: Refer to the Fastener Notice in Service Precautions.
11. Hand tighten the new "break-away head" fuel sender attaching bolts until finger tight.
IMPORTANT: The upper hex head portion of the fuel sender attaching bolts is designed to shear off of the lower section of the bolt when the
proper torque is reached. Do not tighten the bolts after the bolt heads have sheared off. A torque wrench or other special tools are not required. Do
not use thread locking or other types of sealers or lubricants when installing these bolts and gasket.
12. Tighten the new "break-away head" fuel sender assembly attaching bolts in sequence until the upper hex head portion of the bolts shear off of the
lower section.
13. Connect the fuel sender fuel feed pipe (1) (jet pump to left tank), the fuel return rear pipe (2), and the fuel feed rear pipe (3).
14. Connect the fuel sender electrical connector.
15. Install the fuel tank strap (3).
16. Install the fuel tank strap bolts (1,2,4).
Tighten
16.1.Tighten the bolt (2) to 25 N.m (18 lb ft).
16.2.Tighten the bolt (1) to 25 N.m (18 lb ft).
16.3.Tighten the remaining bolts (4) to 25 N.m (18 lb ft).
17. Install the fuel tank shield (3).
18. Install the fuel tank shield mount bolt (1).
19. Install the fuel tank shield mount nut (2).
Tighten
^ Tighten the fuel tank shield mount bolt to 25 N.m (18 lb ft).
^ Tighten the fuel tank shield mount nut to 12 N.m (106 lb in).
20. Install the rear wheel and tire assembly.
21. Lower the vehicle.
22. Refill the fuel system.
23. Install the fuel filler cap.
24. Connect the negative battery cable.
25. Inspect for leaks.
25.1.Turn the ignition switch ON for 2 seconds.
25.2.Turn the ignition switch OFF for 10 seconds.
25.3.Turn the ignition switch ON.
25.4.Inspect for fuel leaks.
26. Program the transmitters. Refer to Transmitter Programming/Synchronization in Keyless Entry.
27. Perform the idle learn procedure. Refer to PCM Idle Learn Procedure.

Jul 06, 2009 | 2000 Chevrolet Corvette

1 Answer

I can't figure out how to get adobe premier pro 7 to capture!


FIRST INSTALL ANY FIRE WIRE CAPTURING CARD & THEN CONFIRM THAT IT IS PROPERLY INSTALLED & HARDWARE IS DETECTED. AFTERWARDS WHEN U WILL ATTACH UR HANDYCAM WITH YOUR CAPTURING CARD YOUR CAMCORDER WILL BE DETECTED AUTOMATICALLY & THE WINDOW WILL OPEN & WILL ASK YOU THROUGH WHICH SOFTWARE YOU WANT TO CAPTURE THEN SELECT ADOBE PREMIERE THEN OPEN ADOBE PREMIERE GO TO FILE MENU & THEN SELECT CAPTURE THEN U CAN PLAY , REWIND OR FORWARD TOTAL FULL CONTROLL OF CAMCORDER WITH SOFTWARE ,TO CAPTURE CLICK RED BUTTON,IT WILL START UR CAPTURING,GIVE THE FILE NAME & DESTINATION WHERE U WANT TO SAVE THE FILE THEN START CAPTURING.

Mar 22, 2009 | Adobe Premiere V 7.0 Professional for PC

2 Answers

Cannot open pdf attchment


I had the same problem, and I solved it the following way.

The problem is that as soon as the temporary folder contains more than 100 "Document.pdf" (Document.pdf",Document(1).pdf",Document(2).pdf" etc...) it will not allow you to open anymore.
The only way around is to go in the temporary folder and delete one or more "Document.pdf"

To open the Temporary folder:

-open any pdf document that does not have this problem,
-Go to File and then to Save As.

Directly from there you can delete the "Document.pdf

You will then be able to open the Digital Sender scanned pdf document.

Oct 06, 2008 | HP 9200C Digital Sender

1 Answer

Opening downloads on emails


all you need to know is the file extension of the file you downloaded. there are some common file extensions when attaching to the email . pdf , doc, if pictures the JPG,PNG, BMP, and many more. however if u have an office application program (Microsoft office,open office) all office files will be opened but if the file extension is PDF you must download and install the PDF reader. you can download it here http://www.adobe.com/products/acrobat/readstep2.html.
Take note! Any other files which you don't whose the sender and the extension files is not on office application program not pdf or picture files maybe can harm your system so be sure to know the files.

Dec 11, 2007 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...