Question about Big Button TV Universal Remote

2 Answers

My Handicapped Step-son has a Living Solutions large button remote model A17G0510/ATC-510 for which he needs the devices programing numbers which he can than input into his Concast cable box so it will comunicate with the remote. Can you help.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

You can use a comcast remote to program tv, vcr, dvd player, and stereo, but not sure if comcast box can be programmed into this remote. If it can be, then this would be how:

  • Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.

  • 2

    Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "Cable Box, TV, VCR, DVD," etc. Hold the device button for three to five seconds.

  • 3

    Push the power button on the remote. This should turn on the device that you are syncing.

  • 4

    Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.

  • 5

    Press "OK" or "Enter" on the remote once the synced device turns off.

  • 6

    Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.

  • Posted on Oct 12, 2010

    • Level 3:

      An expert who has achieved level 3 by getting 1000 points

      Superstar:

      An expert that got 20 achievements.

      All-Star:

      An expert that got 10 achievements.

      MVP:

      An expert that got 5 achievements.

    • Master
    • 11,800 Answers

    On your remote the Comcast box isn't listed But you can find out if your remote has a code that matches it by following this:
    1 - Turn on the Comcast box on.
    2 - Hold the code search button for three seconds.
    3 - Press the Cable button
    4 - Press the on-off button slowly until the cable box shuts off.
    5 - Press the "enter" button this should set the code in the remote.. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.

    Posted on Aug 25, 2010

    1 Suggested Answer

    6ya6ya
    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    Hi,
    a 6ya expert can help you resolve that issue over the phone in a minute or two.
    best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    goodluck!

    Posted on Jan 02, 2017

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Program codes for living solutions model ATC-510 universal remote big button


    Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
    http://remotesearch.blogspot.com/
    http://electronicshelponline.blogspot.com/
    http://electrohelponline.blogspot.com/
    Search the site by type in the brand name of your device, in the "Search box at the top right of the Home page display" to see the set-up codes to your device, with different brand remote controls.

    Oct 19, 2015 | Big Button Televison & Video

    1 Answer

    I have a livingsolutons big button remote control


    This remote control have no set-up code to Philips brand TVs.
    Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
    http://electrohelponline.blogspot.com/
    http://remotesearch.blogspot.com/

    Sep 07, 2014 | Televison & Video

    1 Answer

    Need manual and codes for the living solutions jumbo universal remote model # a17g0510 / atc-510


    John,
    Your best bet would be to visit the website of the makers that made your television, so you may be given more accurate information regarding the television.
    Thanks,
    Dish Guy

    Jul 17, 2012 | Innovage Jumbo Remote Control

    1 Answer

    Need remote code for symphonic tv. Have living solutions giant remote


      Programming a Living Solutions Universal Remote
    1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.
    2. Step 2 Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
    3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
    4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
    5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
    6. Step 6 Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.


    Jun 30, 2010 | Symphonic ST420FF 20" TV

    2 Answers

    Have a Universal Remote by LIVING SOLUTIONS, A17G0510 and have lost the codes to program it for a LG TV. pbarnes803@hotmail.com


    Try the code search with your remote.
    1. Turn off your device
    2. Hold the button of what you want to program (TV,VCR,DVD) until the red LED light lights up
    3. Press the power button
    4. Keep pressing Channel up/down until the device turns on
    5. Press “OK”
    6. Press power and volume/channel buttons to check it

    Oct 03, 2009 | Universal Remote Control Remote Control

    2 Answers

    I can't find the code for our tv brand it is a


      Try This Out


      Programming a Living Solutions Universal Remote
    1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player2.gif, VCR or stereo.
    2. Step 2 Pointthe remote at the device you are programming and press thecorresponding device button on the remote. These buttons are labeled"TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
    3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
    4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
    5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
    6. Step 6 Pressthe device button for the component you just programmed, and hit thepower button while pointing the remote at the component. If programmedcorrectly, the device should turn on, and you should be able to controlit with your Living Solutions Universal Remote.

    Sep 21, 2009 | Big Button TV Universal Remote

    1 Answer

    Need instructions to program Living Solutions Speakerphone ATC-355


    living solutions desktop phone (model unk) programing.

    turn on with speakerphone button
    hit store button once
    enter phone #
    hit store button once
    hit memory button ( where number is to be stored) once
    hit auto button once


    to dial stored #'s
    kift reciever or turn speakerphone on
    hit auto once
    hit memory button (where # is stores) once
    wait for completion of call

    Sep 19, 2009 | Lands Phones

    2 Answers

    Programming a remote


      Programming a Living Solutions Universal Remote
    1. Step 1 Turn on the component you wish to sync to your universal remote--your television, DVD player, VCR or stereo.
    2. Step 2 Point the remote at the device you are programming and press the corresponding device button on the remote. These buttons are labeled "TV," "VCR", "DVD," etc. Hold the device button for three to five seconds.
    3. Step 3 Push the power button on the remote. This should turn on the device that you are syncing.
    4. Step 4 Push the "Channel Up" or "Channel Down" button on your remote gradually until the device that you are programming shuts off.
    5. Step 5 Press "OK" or "Enter" on the remote once the synced device turns off.
    6. Step 6 Press the device button for the component you just programmed, and hit the power button while pointing the remote at the component. If programmed correctly, the device should turn on, and you should be able to control it with your Living Solutions Universal Remote.

    Sep 01, 2009 | Televison & Video

    5 Answers

    Living solutions giant remote control 3-in-1, A17G0510 (Item606426)


    I had trouble programing the living solutions giant remote - c17g0801.
    But after many times serching I ran across a genius' resolution (maybe it was 2 genius') -
    Jumbo Remote:
    Make sure you have device turned on.

    Hold the device button you want to program for 3 seconds & release.

    Push & release the power button & the red light will remain lit.

    Push the CHANNEL UP button over & over slowly until the device turns off.

    When device turns off press OK button.

    Oct 27, 2008 | Philips Magnavox Learning Universal Remote

    Not finding what you are looking for?
    Big Button TV Universal Remote Logo

    Related Topics:

    449 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Big Button Televison & Video Experts

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    Bill Jones

    Level 2 Expert

    66 Answers

    Cindy Wells

    Level 3 Expert

    5101 Answers

    Are you a Big Button Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...