Question about Kodak (1723949) Bluetooth Wireless Adapter

1 Answer

Will this adapter work with a All in one 5500 printer?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi as long as the printer is bluetooth capable then this dongle will pick up the signal and it will then let you use the printer.

you should have no problems using it as long as you have the printer software installed on your computer and you also need to install the drivers for the usb bluetooth once you have done this you need to make sure the printer is switched on then you need to scan using the bluetooth software then just connect with the printer, this will then pair the devices and will let you use the printer via bluetooth

let me know how you get on or if you need further assistance.

plz can you rate this solution as i have pages on unrated posts filling my page, thanks

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp 5500 printer


The HP Color LaserJet 5500 and the DesignJet 5500 are older printers with a parallel port on the basic model. A network card was added or available as an after-market add-on; this would connect to a router or network switch. Assuming you have the basic model and your laptop is new enough to only have USB ports, you need a USB to parallel port adapter. http://www.amazon.com/electronics/dp/B0007UVRVO is one model. (Note: the parallel port on the printer is a bi-directional port; you will need an adapter with bi-directional communication.)

I hope this helps.
Cindy Wells
(According to the HP site, the driver for the LaserJet 5500 should be available from the Windows 7 Windows Update feature. For Windows 8, you will need to download and install the Dot4 program before the printer will work. See http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=83880&prodTypeId=18972&prodSeriesId=83875&swLang=8&taskId=135&swEnvOID=4132 for the file If you have a different OS, see the HP site for your printer driver information.)

Jun 30, 2013 | Computers & Internet

1 Answer

The printhead has been cleaned and recleaned and we still get the error message code 3806. What else should we do?


To resolve this error:
  1. Disconnect the power adapter from the printer.
  2. Wait 30 seconds to allow the printer to reset.
  3. Connect the power adapter to the printer. Turn on the printer, if necessary.
If the error continues:
  1. Open the printer access door.
  2. Remove andinstall the printheadtwo times.
  3. Close the printer access door.
  4. Wait until the printer is ready to use.
  5. If the error is displayed, Support .

Hopefully this helps.. Thank you for posting.

Jul 07, 2011 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

Can i make my kodak easyshare 5500 wireless? or is it not able to go wireless?


Hi,

Well, yes, to some extent.

This printer will accept a Kodak Bluetooth adapter which plugs into the USB port in the front of the printer. You can then send pictures from Bluetooth enable products such as PDA's, mobile phone, and digital cameras.

You can refer to Page 41 in the manual.

Kodak 5500 Manual

Thanks for using Fixya.

Jan 20, 2010 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

What is error code 3802


"Printhead Failure" (error code 3802)
To resolve this error:
  1. Open the printer access door.
  2. Disconnect the power adapter from the printer.
  3. Remove and install the printhead two times.
  4. Wait 30 seconds to allow the printer to reset.
  5. Connect the power adapter to the printer. Turn the printer on if necessary.
    • After the printer completes powering up, the message "Printer access door open" will appear.
  6. Close the printer access door.
If error condition continues, contact Kodak for printhead replacement.

Best of Luck

Nov 17, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

How do you make the Kodak 5500 cap of wireless printing?


Bluetooth adapter wil only allow you to print photos wirelessly.

If you want to connect through wi-fi please contact kodak and ask for "SILEX".

Nov 14, 2009 | Kodak ESP 5 Printer

1 Answer

Got aio kodak 5500 printer hw to print wirelessly,


The Kodak 5500 AiO Printer has no WiFi functionality and thus will not work wirelessly

Oct 21, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

The Installation disk does not work for Kodak EasyShaare 5500


The easiest thing to do is download the installation for the EasyShare 5500 from the kodak website.

Mar 18, 2009 | Kodak EASYSHARE 5500 All-In-One InkJet...

1 Answer

How do I change the ink cartridge?


Try unplugging the ac adapter from the printer the leave if "off" for 30 sec. After that, power "on" then try again, if it doesnt go to the center, try unplugging the ac adapter again then connect after 15 sec w/ the access door open once you see the carriage pass the center try unplugging the adapter again. If after doing this the carriage is still jammed call tech support at 1 800 421 6699

Nov 15, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

2 Answers

5500



This error message indicates that a problem occurred with the scanner. To resolve this error condition, do the following:
  1. Turn off the printer, then disconnect the power cord.
  2. Wait 30 seconds, then connect the power cord.
  3. Turn on the printer.

May 13, 2008 | Kodak EASYSHARE 5500 All-In-One InkJet...

Not finding what you are looking for?
Kodak (1723949) Bluetooth Wireless Adapter Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Computers & Internet Experts

kakima

Level 3 Expert

102366 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

16051 Answers

gaucherre

Level 2 Expert

194 Answers

Are you a Kodak Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...