Question about Whirlpool SF367 Gas Kitchen Range

1 Answer

Oven and oven light not working

I have a Whirpool oven model number SB130PER-0 The oven will not heat up also when i turn the oven on the indicator light does not come on. any suggestions. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Expert
  • 310 Answers

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=53999&thid=573756
Oven and oven light not working
Posted by Tvaclav on May 05, 2008
I have a Whirlpool oven model number SB130PER-0 the oven will not heat up also when i turn the oven on the indicator light does not come on. Any suggestions? Thanks


Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR APPLIANCE before beginning any service procedure.
You may have an bad heating element that would needs replacing because that is the heat source for the oven and on the oven light issue you nay have a bad sending unit , switch or just a burnt out bulb or light. Check with your local Whirlpool appliance dealer – sometimes they can be of some help. So if you need further assistance, please feel free to contact your local appliance dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.
http://whirlpool.com/home.jsp
Contact Us
Hours: M-F 8am–8pm Local Market Time
S 8:30am–5pm Local Market Time

- Get shopping help
- Order parts and accessories


Call 1-866-698-2538
Thanks, Don – The Appliance Man
Go Ahead. Use Us.

Posted on May 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a oven bulb lens for my Kitchenaid Superba. I think my model is 9752834A. I need two of them. The one is have has B-1 on it.


Unfortunately, 9752834A is not a model number for the KitchenAid Superba. Usually the model number will have 4-5 letters, 3 numbers, 2-3 more letters and then a final number. Look inside the oven door for a plaque with the model number. With the correct model information, you can see if the lens cover is available.

Next, Kitchenaid ovens either have a rectangular (for models that use halogen bulbs) or circular (for models that use an incandescent bulb) lens cover. I've found three lens covers for Kitchenaid products at RepairClinic.com: http://www.repairclinic.com/Shop-For-Parts/a13b121c48/Kitchenaid-Range-Stove-Oven-Lighting-Light-Bulb-Parts . Check if http://www.repairclinic.com/PartDetail/b121p13/Kitchenaid-Range-Stove-Oven-Light-Lens/9781049/748782?ss=a13b121c48&mr=0, http://www.repairclinic.com/PartDetail/b121p13/Kitchenaid-Range-Stove-Oven-Light-Lens/4452163/589998?ss=a13b121c48&mr=0 or http://www.repairclinic.com/PartDetail/b121p13/Kitchenaid-Range-Stove-Oven-Light-Lens/4375318/584498?ss=a13b121c48&mr=0 look like your model. RepairClinic.com does not have the model numbers. However, Appliance Parts Pros list most of the same parts and has a model number compatibility checker, http://www.appliancepartspros.com .

I hope this helps.

Cindy Wells

Feb 01, 2015 | KitchenAid Kitchen Ranges

1 Answer

Burners work, no display, no oven light, can't turn on oven, buttons don't function


Check your circuit breakers, they should be double breakers. Probably 30 to 50 AMP. Sometimes one side of a double breaker will trip or fail. This will give the appliance 120 volts instead of 220. The "leg" of the 220 volt circuit that is out might control the stove's display, and the oven would not work on 120 volts. If the burners aren't as hot as they should be, or are slow in heating up it would also indicate a faulty breaker If it's not the breakers it's likely a problem in the stove circuitry.

Dec 09, 2014 | Kitchen Ranges

1 Answer

I have a whirlpool gold electric range,accubake model gy397lxus.oven not heating and range top not heating,digital control blank unless i rotate a heat selector for range top to on,the light indicators for...


Hi,
I have look up your unit, I found the thermostat located inside the back panel the would only take out the function to your elements in your oven.
High limit thermostat
This link shows its location and price of the part. Now for you display issue, before continuing, push and hold the clock button on the panel until you hear a beep, if the unit is set to Sabbath mode this will clear that. If not I will continue, by the way missing a version number to model number, like a number (0 or 02). Have you have a power outage recently? I am not locating any line fuses the would take the display out. If the clock doesn't reset then I would think about checking warranty or can your dealer to inquire on your warranty.
Control Unit
Good Luck and I hope this helps.

Aug 17, 2011 | Whirlpool GY397LXUS Stainless Steel...

1 Answer

Onece the range selector is turned on the light comes on but soon goes out, if you move the selector a little the light comes back on, this stove was made around 1952. Thank You, Dave


Are you talking about the oven temperature control? When turned on to the selected temperature the oven indicator will light and the element will work. When the oven reaches the desired temperature the power will shut off to the element and the indicator light will go out. When the oven cools slightly the indicator light and the element will again turn on. When it does turn off and you turn the knob slightly to increase the temperature the indicator light and element will come on again as you are asking it to heat to a higher temperature. This is normal oven operation.

Mar 10, 2011 | Kitchen Ranges

1 Answer

Tappan Oven #MEF500PBWD heating unevenly


Perhaps the item you are using to check temperatures is not accurate. I my line of work, I use a digital thermometer which records immediate temperature. Perhaps understanding the process will help you see more accuracy in the way you read the temperature in your oven. Allow me to offer this explanation....First of all, place your thermometer near on the top rack as close to the oven temperature probe as possible. This probe is the focal point for your oven and detects the temperature and opens the electrical circuit to turn off the element when the desired set temperature is attained. Set your electric oven to 300 degrees and hopefully, you have a window in your oven to watch. The bake element will come on and the temperature will rise until it reaches 300 degrees. It is at this point when your oven bake indicator light should go out. When this happens....look inside. The element is still bright orange and emitting heat and will continue to raise the temperature in the oven to approximately 325 - 340 degrees. With this noted, you will see the temperature beginning to drop 315, 310, 300, 295, 290, 285 perhaps even 280 or some even lower to 275 and then the indicator lamp will go on indicating the circuit has closed thus turning on the element, Finally there is a variance and no range GAS or ELECTRIC will ever maintain a even 300 degree temperature. The calibration set point is based on the 300 degrees. If your oven light goes off within 20-25 degrees of three hundred degrees, your oven is already calibrated pretty close and I would not attempt to adjust it at all.

Feb 16, 2009 | Tappan TEF242 Electric Kitchen Range

1 Answer

Electrolux built in wall oven, lights and digital display work fine, fan works fine, but the oven will not heat regardless of the mode (broil, bake, convention roast, convection bake)


Hello stevefer
Welcome.

You said, Your Electrolux built in wall oven, lights and digital display work fine, fan works fine, but the oven will not heat regardless of the mode (broil, bake, convention roast, convection bake)

First,
1.What is the Model Number and the year of your wall oven?
2.Did the oven light up and display with any error codes?
3. Did you try to turn the breaker off for 5 minutes to see if this will reset the system?

Perhaps the heating element is failing and may need to be replaced.
I will be able to better assist you when you reply with this information.
Waiting your response.
Huuum

Oct 16, 2008 | Kitchen Ranges

1 Answer

Whirpool Gold Acubake gas stove model GW395LEPB02 purchased in Oct 2006.When I am baking on 350 the oven jumps to 500 and smokes is everywhere. The number E2F3 shows up on the control board. What is the...


This error indicates the Oven temperature is too high,
You will need to replace the Oven temperature sensor (RTD).

6ac1cd2.jpg

This part can usually be replaced from inside the oven.

Jun 22, 2008 | Whirlpool Kitchen Ranges

1 Answer

Oven range does not work (broiler and oven)or heat up. Upper burners are working. Whirpool Model # RF 3663XDWO Serial # FF 4705148 Fault code Lights as F3


F3 on that model should be a sensor problem. It's the metal probe coming in from the back top inside the oven. Check for a loose wire first between sensor and oven control. Be sure to unplug unit before taking back off to check for wires.

Apr 17, 2008 | Kitchen Ranges

Not finding what you are looking for?
Whirlpool SF367 Gas Kitchen Range Logo

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Whirlpool Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...