Question about Kodak i260 Duplex Color Scanner
I recently bought a new laptop, but cant seem to get the Kodak i260 scanner to work on it. It worked fine on my XP box, but the laptop is running vista. Can you help? I have downloaded the new drivers and firmware at Kodak's website with no luck.
This is a non Vista compatable product.
It may run on Windows Vista 32bit Business though.
Posted on Jul 05, 2009
Not a Vista Compatible Kodak tested machine.
But may work on Vista 32 bit platform.
Vista Business 32 bit.
Posted on Jun 10, 2009
SOURCE: Kodak i280 scanners
Check this out :
1) One of your USB devices have faulted, or is causing a resource conflict (or similar)
-- Remove all USB devices, and reboot.
2) Your USB chip/ports have been damaged.
-- Find a spare HardDisk or bacjup your data and re-install Windows and see how that goes.
3) Your Power Supply Unit (PSU) isnt supplying enough power to your PC (usually caused by a Video card upgrade). Try a more powerful PSU ... 400watts should do the trick
4) Bad memory (RAM) can cause wierd problems. run memtest for an hour to make sure your memory is ok
It seems that many people are still getting the 'USB Device not Recognized' problem from time to time. Unfortunately there is no easy fix.
Firstly, it's recommended that you make sure every one of your motherboard drivers are completely up-to-date, but you probably already knew that.
In XP, after a USB port isn't used for a long while the USB driver built into the OS sets the OHCI controller to suspend. When you plug a device back in, it can sometimes fail to 'wake up' properly. This problem was supposedly fixed in SP1 but there is a related registry hack that may still be able to help.
Run regedt32.exe and navigate to;
Create the Usb key if it doesn't already exist. Under this key, create a new DWORD value called DisableSelectiveSuspend and give it a value of 1. Then restart the PC.
A long shot perhaps, but I recall having similar problems with a USB hub built into my Microsoft keyboard and adding this key seemed to solve it. It wouldn't hurt in trying .
Alternatively, removing all entries relating to USB in Device Manager and all associated USB drivers will force XP into refreshing the USB driver stack.
Begin by unplugging all USB devices, then use Add/Remove Programs in Control Panel to uninstall any USB driver software. Next, boot up into safe mode and go to Device Manager. Once in device manager make sure 'Show hidden devices' is checked under the View menu. Uninstall all device entries in this order;
1. USB peripheral devices (printers etc.)
2. HID and/or Composite USB (Human Interface Devices) You're using PS/2 input devices so you may not have this entry.
3. USB Root Hub(s)
4. USB Host Controller(s) (Universal or Enhanced Host Controllers)
Then boot back into Windows (not safe mode) and it should populate the Root Hubs & Host controllers again. Proceed to plug your USB devices back in, starting with your powered hub. Be aware that most USB printers and scanners need to have their drivers installed first before you plug them in.
Hopefully some of this may be of help, let us know how you get on.
Please let me know if u got help and rate this SOLUTION AS FIXYA if ur problem is fixed!
Posted on Nov 16, 2007
SOURCE: Kodak i260 Scanner
All of a sudden I am getting a double-image when scanning a document. The first part of the image has been moved to the left about 2 inches and the second image on it starts about 4 inches down and about 4 inches from the left. So weird. Any ideas of what could be wrong?
Posted on Apr 06, 2011
Tips for a great answer:
Jan 16, 2013 | Kodak i260 Duplex Color Scanner
Nov 17, 2011 | Kodak i260 Duplex Color Scanner
Jan 23, 2010 | Kodak Scanners
Oct 20, 2009 | Kodak I260 Captiva IA-Express Path-Through...
Mar 03, 2009 | Kodak i260 Duplex Color Scanner
Oct 05, 2008 | Kodak I260 Captiva IA-Express Path-Through...
249 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: