Question about Lexmark X646e All-In-One Laser Printer

1 Answer

Printer lexmark x646e,need to reset the password, changed the board and not have the password

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 241 Answers

To reset the password you will have to set the unit back to factory defaults. Warning the following instruction will reset all settings in the MFP be prepared to enter all intial settings again.

1. Turn off the unit.
2. Press and hold 2 and 6 while turning on the unit.
3. Release the 2 and 6 after 10 seconds.
4. You will now have access to the configuration menu.
5. From the menu list touch Factory Defaults.
6. Then touch Restore Base.
7. Wait for the progress screen then the unit will restart.
8. All initial setup and settings will have to be entered.

Hope this helps, thanks for using Fixya.com

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Would like to get a password for my lexmark printer


This article appears to have the solution:

http://support.lexmark.com/index?pmv=print&page=content&locale=en&userlocale=EN_US&id=HO3324

Apr 16, 2013 | Lexmark X646e All-In-One Laser Printer

1 Answer

Lexmark x646e turn off after 3 mins


Try updating the firmware of your printer: http://bit.ly/P8Ng6S

May 24, 2012 | Lexmark X646e All-In-One Laser Printer

1 Answer

Hi i have a lexmark x646e printer/scanner. When i copy or scan a black line appears in the paperwork. If you an please contact me asap. Thank you!


Debris or marks on the scanner glass can affect the quality of the scanned or copied documents. Please try to clean the flatbed. Please click on the link below for more details.


http://bitly.com/q9lAn0


If you need further assistance please contact Lexmark technical Support.

Aug 12, 2011 | Lexmark X646e All-In-One Laser Printer

1 Answer

Why is my lexmark x646e is printing with black lines


Debris or marks on the scanner glass can affect the quality of the scanned or copied documents. Please try to clean the flatbed. Please click on the link below for more details.
http://bitly.com/q9lAn0
If you need further assistance please contact Lexmark technical Support.

Aug 12, 2011 | Lexmark X646e All-In-One Laser Printer

1 Answer

How to reset master password


Please try to reset NVRAM (Non-Volatile Random Access Memory) or restoring printer base will clear the password. Click on the link http://bit.ly/ouiBuJ to see instructions on how to go about the procedure.

For further assistance, please contact Lexmark Technical Support.

Jan 28, 2011 | Lexmark X646e All-In-One Laser Printer

1 Answer

MY PRINTER STATES 900.43 SERVICE RIP SOFTWARE- LEXMARK X646E MULT


It would be there are some data lost or program doesn't work properly. Just clean up the Interface board. Its the junction (I/O) from mainboard to SCC board. Also maybe it cause by the fax pending job that has been stored. Just go to Service Menu and format the fax storage. If the message still occurs after the ADF Scanner work, just check that the scanner lamp is on. if not you should change the Flatbed Interconnection board. That's all.

Nov 18, 2010 | Lexmark X 646e MFP - multifunction ( B/W )...

1 Answer

Rear door paper jam


Here are some articles on rear door paper jam on Lexmark X646e printer. Just click on these links: http://bit.ly/blkK1m ("202 Paper Jam" Message on a Lexmark X642e, X642e or X644e Multifunction Printer) and this link: http://bit.ly/awNDER (A 202.xx (x = any number) Paper Jam Message Is Appearing on a Lexmark X64x Series Printer). These are some guidelines on how to resolve the rear door paper jam on your printer. If you need more assistance, don't hesitate to contact Lexmark Technical Support. Thanks.

Jul 22, 2010 | Lexmark X646e All-In-One Laser Printer

1 Answer

Lexmark x646e 936.11 Service transport motor


i advice to coordinate this with lexmark service, they can test and replace this transport motor.

Apr 13, 2010 | Lexmark X646e All-In-One Laser Printer

1 Answer

Lexmark X646e 927.02 Service fan stalled


This means the fan on the top of the machine, just below the scanner is not working or not working correctly. You will have to replace it.

Jan 06, 2010 | Lexmark X646e All-In-One Laser Printer

Not finding what you are looking for?
Lexmark X646e All-In-One Laser Printer Logo

Related Topics:

3,630 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Don  Farrell
Don Farrell

Level 3 Expert

1018 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18407 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...