Question about Panasonic CW-XC104HU Air Conditioner

1 Answer

Hello my Panasonic split units air condition is displaying E2 and later disappear totally . thanks

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 28 Answers

Please read this entire message before doing aniything

that is a problem with you compressor unfurtunatly my recomendation would be to just replace the entire unit but if you have a multimeter and a little patience hear is how you make sure

remove the outside cover and you will be able to see the compressor wich will look like a black tank with copper tubing running into it now that you have located the compressor there will be three wires running into it(usually in a harnes making it apear to be one big wire remove the wire cover off of the compressor there should be two plugs conecting into three pegs on the compressor be sure to make a note of which wire go which pegs it should be clearly marked on the cover as (s) for start (r) for run and (c) for common now set your multimeter to ohm touch your wires from your meter (with the plugs off) to the (s) to (c) pegs write down what you get now the same but (r) to (c) write down what you get then add those numbers together now touch (r) to (s) and that number should equal the number you just added up if not your compressor is bad and your unit should be replaced if under warranty panasonic should take care of that please note that a multimeter costs about the same as a new unit so if you dont have one dont bother trying to diagnose

i hope i was able to help you out

Posted on Aug 26, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Accent model ADC 27E1. Why is it displaying E C fault?


FAQs and Troubleshooting - Actron Air

www.actronair.com.au/service-and-warranty/faqs-and-troubleshooting
The air conditioner is not running at all and no control lights are on. (If there are no ...Air conditioner regularly cuts out on a circuit breaker trip or error code ...

Air conditioning (Accent Air control panel) is - Fixya

www.fixya.com/support/t3343544-air_conditioning_accent_air_control
Nov 3, 2009 - Air conditioning (Accent Air control panel) is displaying EC - what ... Panasonic mini split air conditioner css9nkua error code h99 what does it mean ...ERROR CODE ON AIRCONDITIONER LG ART COOL INVERTER MODEL .

Dec 05, 2015 | Heating & Cooling

1 Answer

Hello We just installed a Sanyo KHS1271 mini-split


The condensate drain line was not properly installed. Make them pull the wall unit and correct the problem.
Be persistant until you are satisfied they have the problem corrected. Do not pay any additional money. If they do not correct the problem then report them online to the state board of heating and air. Fill out their requested complaint form and follow thru with a second complaint if you do not get total satisfaction from the contractor that installed the unit.
Hope this helps.

Sep 23, 2011 | Sanyo Split System Air Conditioner

1 Answer

E2 error code in samsung split AC


From all Samsung recomendations... if your air conditioner displays E1 in the display panel and won't turn on, it means that the Room Thermistor (a device connected to the thermostat that detects room temperature) is shorted or defective, and you need to have your air conditioner serviced.

If it displays E2, E3, or any other E error, you also need to have your air conditioner serviced.

To arrange for service, contact Samsung Customer Care at 1-800-Samsung (1-800-726-7864) any day between 9:00 a.m. and 9:00 p.m. Have the model number and serial number of your air conditioner on hand when you call.

Hope helps.

Jun 29, 2011 | Samsung AS18A6RB Air Conditioner

2 Answers

We were getting an E4 but now we get an E2 but


I do know that the owners manual should show you what each and every code means? Some times the manufacture will paste a strip located on the panel of the indoor unit showing what each code means. If not, I would contact the factory on this. I know on Bryant, Mitsubishi splits, Day and night, (Bryants), Tranes, Lennox and most all others, do show in the manual and on the unit behind the panel. Try looking for them there.
Sincerely, shastalaker7

Oct 19, 2009 | LG LS-L1210CL Mini Split Air Conditioner

1 Answer

Panasonic Split System Air Conditioning.


we have a old national air con cassette model cu-5chv11p , works for three days , then controller comes on e4 error ,and then switches off , and will not reset .

Dec 28, 2007 | Heating & Cooling

Not finding what you are looking for?
Panasonic CW-XC104HU Air Conditioner Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Heating & Cooling Experts

Bill Long

Level 3 Expert

587 Answers

Fotis Papastamatiou

Level 2 Expert

96 Answers

Dennis Boxerman

Level 3 Expert

1144 Answers

Are you a Panasonic Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...