Question about Projection Televisions

2 Answers

I have a PT-56WX33G rear

I have a Panasonic PT-56WX33G rear projection tv. All I see is a vertical line in the middle of the screen (which is also not as bright as it was before). Also, when the channel is not available and there is static on the screen I do not hear anything through the speakers. Otherwise, when it is on station I do hear the sound.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Do you have some hand soldering/desoldering skills to do this task?
The removing of the assembly(comb filter) will required the use of a desoldering tool and also the capacitors that need replace will have to be remove as well.
Let me know if you need further assistance.

Posted on May 05, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Projection T... Master
  • 3,614 Answers

Take out the comb filter and replace the surface mount electrolytic capacitors (I think there were around 4 of them) on the comb filter and put it back in the motherboard. MCM sells a kit If I'm not mistaken with capacitors that fix this problem as well as the picture in picture problem which these same sets have.

Posted on May 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My panasonic PT-51SX60A has a 2 inch picture loss


tv looks fine then I get just a line in middle and nothing else

Jul 24, 2010 | Panasonic PT-51SX60 51" Rear Projection...

1 Answer

Screen went black with a vertical rainbow line down the middle


Failue of the vertical section, could be the drive, the power to the section or even some discrete componets. Unless you are familiar with electronics , get some help to ceck out on these circuits, could not be major but to get themain culprit will require good probing.

Jun 29, 2010 | Panasonic PT-56TW53 56" Rear Projection...

1 Answer

Vertical lines across screen on my panasonic tv PT-61LCX65


Try setting a portable fan aimed toward the cooling vents on the back of the set. If this eliminates or reduces the occurance of the lines, this means a circuit that controls the off/on of individual pixels has developed a thermal problem. This circuit is ordinarily loacted on the main circuit board and is likely to degrade further. You might inquire at the Panasonic service center if they have an exchange program in place and they will probably be able to confirm my suspicions.

Aug 09, 2009 | Panasonic PT-61LCX65 61" Rear Projection...

2 Answers

Panasonic PT-47X54J Not working


I can't tell you how to fix this set, but I can tell you that its not a "lamp" issue as this doesn't have a lamp. Its a 3 picture tube projection TV. the three tubes are in a red green blue format, and average about $175 for each one, not including the labor to install them. your problem, may not be the tube, but just a power supply problem, but there is a chance it is.

Nov 21, 2008 | Panasonic PT-47X54 47" Rear Projection...

2 Answers

Panasonic PT-53wx53G 53' projection tv problem


was your tv hit hard,a non magnetically shielded speaker set on top or under it?

Nov 09, 2008 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Showing black screen with a blue line


Is the blue line running straight across the middle of your screen? If so its a vertical deflection problem. Possible bad Vertical output IC

Feb 20, 2008 | Panasonic PT-47WX53 47" Rear Projection...

1 Answer

Screen messed up


Is your model Panasonic 47WX49 HDTV ? You've got something amiss in the verticle deflection circuit.

Nov 24, 2007 | Panasonic PT-47WX49 47" Rear Projection...

2 Answers

Picture shows only about a 2-3" blue,green,or red vertical line down the middle


If your seeing vertical line across the screen you need to check the components in the vertical stage as well as the vertical IC could be bad, or the yoke could open.
Also check if any voltage reaching the vertical stage.

Good luck.

Was this help full.

Oct 31, 2007 | Panasonic PT-47WX53 47" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...