Question about Toshiba Televison & Video

1 Answer

Got cox Digital cable box today, cox can not tell me how to hook up to box to make it rec/play. Info I read old cox papers from 2002 says I need a vcr controller, Cox does not know what that is and it was in their info in 2002.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Expert
  • 276 Answers

For a standard VCR which is what most people have, all you need to do is connect a yellow RCA cable for video from the yellow output jack on the cable box rear panel to the VCR's yellow video input jack on its rear panel. Next connect a white RCA audio cable from the cable box white RCA output jack to the VCRs white RCA audio input jack. You can record a cable show by selecting the LINE input on the VCR and selecting the TV show on the cable box.

Now for playback, connect the VCR to your TV. Connect a yellow video cable from the VCR's yellow output jack to the TV's yellow video input jack. Same for the white audio connection. Select on the TV, the source input for the VCR. Its not complicated and you should not need any other devices for a standard setup with a digital cable box and vcr.

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have a Sanyo CE32DFN2-B digital television. Our region has completed the digital switchover today and now we cannot tune the TV into any channels at all. Is this because our TV is too old to cope with...


Ur tv have a big back like hunt back creature?Yes?This tv it is not a Digital tv.It is an old CRT tv-tube analogue design tv.This tv still will work and have a broadcasting incomming signal if it is hook up to a pay services tv like Satalites tv like Direct Tv,Dish Network tv,Timewarner or Cox Cables services and ATT U verise or Verizon Fio digital hook up.If u wanted to watch a switch over FREE OVER THE AIR DIGITAL incomming broadcasting signal for this tv it will not work alone,the tv must have be to hook up to a BOX that call a DIGITAL CONVERTER BOX than this tv will work for a FREE OVER THE AIR DIGITAL broadcasting tv channels stantions.This DIGITAL CONVERTER BOX are no longer on sale on regular Stores.Tries websites like Amazon.com,Ebay.com will able to buy these BOXES so call DIGITAL CONVERTER BOX.

Aug 17, 2011 | Sanyo Televison & Video

1 Answer

First and foremost, DVD's still play perfectly and the colors are beautiful, perfect and alligned on my PT53WX52. However, on Regular TV-(Cox Cable) every human being appears to be the color similar to...


Replace the cable from your cable box to television. Try one from one of your other cable boxes before buying one, but I highly suspect the actual cable from box to TV is bad

Feb 24, 2011 | Panasonic PT-53WX52 53" Rear Projection...

1 Answer

Try to re tune but it goes throught the motions but does not pick up any channels at all. Tried this many many times. all cabled up correctly. help required please. Its a TWFdigital STB501 Box (Digital...


You need to have a newer digital antena hooked up to it also if your tv is flat panel and its less than say 2 years old the digital tuner should be built in. I dont mean to sound dumb but if you are using a digital coverter box and thats what the antenna is hooked up to make sure your in the menu of the converter box. You can determine this by what channel the TV is on. If you hooked the Box to the coaxle then your TV should be on 3 or 4 if you used Composite(RCA) cables then it should be on aux. But once again I will say the antanna makes all the difference with digital. Old ones do not work. Please respond with more info if this doesnt help.

Dec 14, 2010 | Televison & Video

2 Answers

Can't find where to hook up tv coax.


As far as I can tell your TV is just a monitor. You would have to buy a separate tuner. I had the same problem with mine and found it was cheaper just to use an old VCR. I hooked up the coax wire up to the VCR and hooked the VCR to my TV with composite cables and changed my channel through the VCR. That will only work now if you're using cable because of the switch to digital. If you're using an antenna you will need a digital tuner.

Aug 08, 2010 | Philips 32FD9954 32 in. HD-Ready Plasma...

1 Answer

Hook up of magnavox zv427mg9


I have a magnavox dvd recorder/vcr combo (ZV427MG9A) connected to my Sharp hdtv via hdmi cord, Can anyone tell me simple setup steps to make it record and play on either sides. I have read instruction book over and over and it is still not recording to disc or tapes. I also have Charter Cable connected. Can you tell me what do i need to do to make it work. H-E-L-P!!!!

Nov 17, 2009 | Philips Magnavox DVD+R/+RW Recorder/VCR

2 Answers

Only one HDMI port on new receiver/dvd player


Chances are good that your panasonic would not support HDMI 1.3b firmware and you would loose audio or video anyway. If your Panasonic has digital inputs, ie. coaxial digital or optical, run audio to your receiver and HDMI direct from Cable box/ DVD/other source to TV. On the TV settings menu, turn the speakers "off". If you need further help, post a comment and I can help you more

Oct 14, 2009 | Audio Players & Recorders

2 Answers

Picture is all green tones when on a station ... but when it is on the tv guide chanel the colors are all great except for the little square display of the station it is tuned to drsantucci4


I have the same tv with the same problem ---Green and I have found that the HDMI cable from my Blue rayplayer works just fine when the regular tv is green /I have come to the conclusion that the digital board is not working right so I just went to cox and got the box . I am going to hook my cable up to the top set box from cox and then I am going to hook the component video cables to the tv then I will bypass the Board ,and not scew the cable into the tv . we shall see I think it will work as long as my HDMI and component jacks dont give out to .

Oct 11, 2009 | Samsung HLR5667W 56" Rear Projection HDTV

2 Answers

Hook up Cox Dig CBL Box to receiver and TV for home theater


The easiest way to proceed is by using RCA cables (the red, white, yellow) to connect the cable box.

Jan 02, 2009 | Pioneer HTD-510 System

1 Answer

PCM vs Dolby Digital


OK, I just figured this out. Go to the audio options in your DVD player and switch from pcm to bitstream. Now my movies sound right again.

Nov 16, 2008 | Onkyo TX-DS575 Receiver

2 Answers

Need help hooking up to digital cable box, and tv


If the cable box isn't transmitting surround sound your stereo won't play it. You may be able to emulate it with settings on the receiver.

Jul 23, 2007 | JVC TH-C50 System

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

228 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...