Question about Car Audio & Video

Open Question

Just had my becker europa tr restored and have installed the radio and it isn't functioning. Can you suggest troubleshooting? The power lead has 10-11.2 volts but the green power light doesn't come on when the knob is turned on and nothing out of the speakers.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

kgjsm397
  • 105 Answers

SOURCE: blinking green light on the back of hp pavilion

1. Your smps is OK for power supply
2. check the beep sound for RAM and Video card (If it is long beep the RAM is having and short and frequent the Video card) o

3. Remove RAM then start ssytem see the response shoutdown, clean the RAM place it back start the ssytem
4. Remove the CMOS battery or short the jumber for any setting in BIOS start the ssytem
5. Disconnect all the cables connecting motherboard including Hard disk except SMPS power supply to Mother board

Posted on Jun 22, 2008

  • 1 Answer

SOURCE: bose radio won't turn on

My Bose wave radio (w/cd ) was purchased in 1999, it was working fine untill it quit. Power is gone. What could be the cause and how could i fix it or can it still be fixed?

Posted on Nov 08, 2008

  • 1 Answer

SOURCE: Boss BV9055 Power Up Problem

12/29. I actually figured this one out myself after reading posts concerning parking brake over rides. It turns out that the Boss BV9055 will not powerup if the pink parking brake wire from the units wiring harness is not grounded. Once I grounded that pink parking brake wire the unit did power up.

Posted on Dec 29, 2008

dunnbiker
  • 8546 Answers

SOURCE: won't power up; push power button on, hear click in back left of unti, get nothing on front display and no output from speakers; as if unit trying to operate

Disconnect the speakers and see what happens. Carefully examine the speaker cables for unwanted connections (shorts).
Take a clue from when the power problem appeared. Something was moved and made the buzz a (probable) dead short.

Posted on May 16, 2009

  • 4836 Answers

SOURCE: I have a Becker Europa 2000 radio Model BE1100

Leave it SWITCHED ON...UNDISTURBED for as long as it takes to automatically reset itself

This is usually an hour or two

Posted on Jun 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get a a code for my Becker radio, model BE 4623, serial 48033582?


the dealer.
any lock smith that does cars.
or online
see the 22million hits here (google)

http://www.fixkick.com/power-elect/Keep-Alive/keep-alive.html#radio

http://www.radio-code.com/?gclid=CMqn5sau1L4CFcpj7AodyTwAbw

Dec 13, 2014 | Becker Car Audio & Video

1 Answer

Old radio schematics


Here are five very good sources. One of them lists three or four Becker models, though not your GrandPrix TR. If you cannot find the precise diagram, sometimes a skilled tech can use a similar model's diagram and interpolate the information to repair the model at hand. Also, if you live in a larger city or metro area, you may be able to find SAMS and Beitman's publications in the public libraries. Also, there are antique radio groups on both Yahoo! and Google where many knowledgeable people will be happy to offer what they know to anyone who asks. Just respect members of the group and be prepared to hear lively discussions. They also appreciate updates and photos, so if you are in a position to offer something to the groups in return, do not hesitate to do so. Good luck with your restoration! G

http://www.antiqueradioschematics.com/


http://theschematicman.com/photofact-b.htm (Becker AutoRadios)

https://www.samswebsite.com/photofacts.html

http://www.nostalgiaair.org/

http://makearadio.com/beitmans/

May 26, 2014 | Audio Players & Recorders

1 Answer

Hello ilost my code for becker indianapolis pro BE 7950 sn 85026053


Hi,

These codes for Becker are not widely available for free on the internet. I suggest you go here and purchase the code from this website which is one of the few sites I know that can decode Becker radios online and they are cheap and accurate.

You need to send them the serial number of the radio and they will email the code back to you.

Hope it helps. Thanks for using FixYa.

Aug 03, 2011 | Becker Indianapolis Pro 7950 CD Player

1 Answer

Is it possible to convert the texas ranger tr-396fc from cb to 10 meter amateur band?


Note - You must have an Armature License to legally perform this conversion.
1. Remove bottom cover from radio. 2. On the main PCB, locate J33. (See diagram above) 3. Locate wires on pins marked "P5" (yellow) & "P6" (grey). 4. Cut wire on "P5" (yellow) and install a SPST switch in line. 5. Cut wire on "P6" (grey) and install a SPST switch in line. NOTE: By using two of the function switches available on the radio will eliminate the need for two new switches to be installed and mounted.

ironfist109_0.gif

Mar 08, 2011 | Ranger Communications TR-396FC 40-Channels...

4 Answers

Need master code for radio in a 2000 ml320


Hi,

Regretfully due to reasons of theft or piracy we do not pass the radio codes here at FixYa. If you contact your local Mercedes-Benz dealer they will give you the 5 digit code. (You must have your registration and know the complete serial number of the radio)

Kelly

May 05, 2010 | 2007 Mercedes-Benz ML320 CDI

2 Answers

I need the mercedes benz 1999 clk 430 radio code


AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

  1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
  2. The code number for the radio is advised to you on the enclosed CODE CARD.
  3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
  4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
  5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.
AR82.60-P-7502-01B Coding Radio
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)

  1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
  2. The code number for the radio is given on the enclosed CODE CARD.
  3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
  4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
  5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

Dec 17, 2009 | 1999 Mercedes-Benz E-Class

2 Answers

Becker Europa 1127 code needed


They should have put a small voltage to keep your electronics active during the work. I would go to an original Honda dealership and see if they are any help.

Aug 21, 2009 | Car Audio & Video

3 Answers

Security code for Becker car radio


lost radio code of MB Becker truckline CD65 BE 7045 serial no 68015713

Jul 29, 2008 | Car Audio & Video

1 Answer

Becker/BMW Indianapolis randomly turns itself off and sometimes produces cracking noises on the outputs while playing cd/mp3


The fact that you pulled it out of the car and tested it using a known good power source says more about your troubleshooting skills than most. Now you're ready to do the inevitable... tear it open. Open it up being mindful of internal connectors and possible ground leads coming from amp boards to the chasis. While there is likely no prints available for this unit for schmucks like us there are some very key things to look for.

1. Burnt components. Easiest to spot but hardest to identify. Hopefully there's another component nearby this one to help identify it. There are many online sources to purchase new components.

2. Deceased and bulging capacitors. Many electrolytic capacitors will swell up when they have given up on life. For safety reasons (preventing them from being a IED) the manufacturers have put little cross hatch cuts in the top to relieve the swelling when the electrolyte boils. This makes it easy to spot and caps are super cheap and easy to find. I do recommend getting one of exact value in the uH rating but suggest maybe bumping up the voltage (i.e. going from a 12vdc to perhaps a 16vdc). This will make them last longer in general.

3. Loose connectors. Give a little tug on each connection to see how much they're clinging to life.

Feb 27, 2017 | Becker Indianapolis Pro 7950 CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4836 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...