Question about Remote Controls

1 Answer

Remote control need ir numbers for remote control to control a sanyo dvd player

Posted by on

  • Ronald Tisdale
    Ronald Tisdale May 11, 2010

    I need your remote brand/model#

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. - You can rate a solution with one of four ratings as explained under (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).
  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Posted on May 05, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hello,





    This thread has gone 14 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I program a SANYO RMT-U110 "Moonlight" to operate a Magnavox MDV 2100 dvd player?


Apparently, your Sanyo remote is programmable in which case you can "code search" to find one that works, BUT that particular remote may not have a code for your Magnavox DVD player. You may have to try another programmable remote.

Dec 01, 2014 | Sanyo RMT-U100 RMT-U100 Tv/Cable/Vcr...

1 Answer

I have a "Dish" universal


Your post caught my attention, paulobrien1, as I found it interesting! Here are the codes for a Phillips DVD player: 925, 585, 554, 556, and 678. If you have any questions or issues with that, I encourage you to let me know so I can look into it a bit further for you!

Hope that helps!

Aug 21, 2011 | DISH Network IR Remote Control

1 Answer

I need a code for Symphonic DVD that works with Dish Network


Hi, Cheri Torres with DISH Network Customer Service here. I came across your post recently and wanted to see if I could help. For each of our different models of remotes we have a few different codes that could work with a Symphonic DVD player. I will list here for you the best codes for our more popular models of remotes and also the instructions for programming the remote to your DVD player. I hope this information helps you and if you have any further questions or concerns feel free to ask! :)

Remote model # Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 1688, 1683, 1588, 1594.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 1632, 1522, 1300, 1588, 1594 1624, 1692.
4.0 and 4.4 IR/UHF remotes - codes 1632, 1569, 1733, 1569, 1846.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 1733, 1632, 1694, 1588, 1594, 1756.
20.0 IR and 21.0 IR/UHF remotes - codes 1658, 1588, 1804, 1531, 1617, 1619.

Instructions for addressing the remote to the DVD player
  1. Press and hold the AUX mode button until all mode button back lights come on, then release.
  2. Use the number buttons to enter the device code corresponding to the equipment.
    Note: The light will blink off after each digit is entered and then return to a steady light.
  3. Press the POUND (#) button.

    If the code entered is valid for the remote, the mode light flashes three times.

Aug 20, 2011 | RCA 3-Device Universal Remote with...

1 Answer

Need codes for sanyo dvd player


I found that these websites should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/

Jul 09, 2009 | One For All URC4220 Remote Control

1 Answer

Need Sanyo TV code numbers


These are the codes for Sanyo TV'S for this remote. The newer TV codes are at the end so work in reverse order when inputting these codes. Thanks for using Fix Ya.
542, 589, 590, 591, 592, 609

May 22, 2009 | DISH Network IR Remote Control

1 Answer

Sanyo tv,RCA universal remote,Diamond Vision player--compatible?


Sorry it took so long to respond to your request for assistance. You can find the instructions and codes you need to program your television at the RCA customer support website [http://www.rcaaccessories.com/rcaaccessories/ ] Copy this web address and paste it into the address bar of your web browser. This will take you to the RCA main customer support page. Just go to the universal remote control section and find your model remote control. Use the model number to find the technical support information page. On this page will be a copy of the owners manual and the remote control codes to use with your products. I hope this information helps you with your problem of needing instructions and codes to use your remote with your products. Thank you for using FixYa and have a nice day!

Jan 12, 2009 | RCA 3-Device Universal Remote with...

1 Answer

SANYO FXVR REMOTE


These remote codes seem to work for the Sanyo FXVR remote

http://www.sanyotv.com/RMT-U340A%20(ES)%200192--.pdf

Jan 02, 2009 | Sanyo RCPLC8810 Remote Control

4 Answers

I have a connect-it remote control and i need a code for a sanyo tv can u help plz


hello not sure what your remote model number is but i have instructions for the ER-440 and the codes given for the sanyo tv are as follows...

0141, ...0601, ...0981...1111,...1691,...2091,...0151,...0801,...1021,...1291,...1741,...2251
,...2551,...04011,...0821,...1101,...1351,2051

Hope this helps

happy new year.

Dec 22, 2008 | Jensen JER-422 Universal Remote Control

Not finding what you are looking for?
Remote Controls Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Cindy Wells

Level 3 Expert

4753 Answers

Are you a Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...