Question about Geovision GV-800-16 Video Capture

Open Question

Hi. I just bought a GEOVISION CARD: GV-800 My seller is ALARMAS LAMSEG. THE CARD READS (PHYSICAL LECTURE): GV-650/800(S) V.3.52 BAR CODE: HS-8016 *1005274543 WINDOWS 7 REPORTS: GV-800 ABOUT MY MACHINE: OS: WINDOWS 7 Ultimate - 32 bits PROCESSOR: Intel Pentium Dual E2180 MOTHERBOARD: ASROCK MODEL : Wofdale 1333-D667 CHIPSET : INTEL BIOS :American Megatrends Windows 7 device Mannager reads: AUDIO AND VIDEO CONTROLLERS: GV800(S) Audio #A GV800(S) Audio #B GV800(S) Audio #C GV800(S) Audio #D GV800(S) Video Capture #A GV800(S) Video Capture #B GV800(S) Video Capture #C GV800(S) Video Capture #D *Windows reports that the devices work perfectly I have installed GeoVision Main System Software vs 7.0 But when I run the GeoVision GV-800 System application, the progam displays the message VIDEO LOST on all cameras. I also installed Geovision Main System Software vs 8.3. But the same message appeared. VIDEO LOST. MY QUESTION IS: ARE MY MOTHERBOARD AND GV-800 DEVICE COMPATIBLE. I READ THAT IF MY MOTHER BOARD WAS MADE BY ATI THEN IT IS NOT COMPATIBLE. ┬┐CAN YOU HELP ME CLEAR THIS UP? THANKS FOR YOUR ASSISTANCE.

Posted by on


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 749 Answers

SOURCE: "Lost Video" error

Well, you still violated one requirement and that is still "on order", you should have waited before you consulted us here...

Anyway, there were no problems as you stated, it's just your eagerness to try, The software really needs at least two cameras as the default. I or You can't do anything but wait for that second one... Don't experiment it might cause problems in the future... You know that you can't UNDO that...

Good luck... happy Fixya !!!!

Posted on Feb 01, 2008

  • 1 Answer

SOURCE: I'm having problems with installing GV-650/800 drivers on Win7


Posted on May 14, 2010

  • 3153 Answers

SOURCE: Hello. I have installed geovision on a PC

The username will be Administrator and the password will be the same one as you use to actually get into the server console.

WHS is based on SBS2003 and this is the method I use for RDP to the desktop for full access

Also some versions of windows 7 do not support fully the RDP unless you can turn on terminal services after telling the system and the firewall that you want to allow RDP.

Hope that helps but if you need any more info just ask


Posted on Jul 19, 2010

  • 11800 Answers

SOURCE: Have an 8 camera Geovision GV-650 installed on HP

I'm starting with the assumption that you have tested the card and the cameras and they are ok. In that case you need to check 3 things:
1 - make sure that the cables connecting the board to the cameras are intact. If they are then go to step 2
2 - make sure you are using the latest version of the software - 8.12 - and it's correctly configured (the image settings are set accordingly) : 60 Hz NTSC if you're in US, 50 Hz Pal if you're in the rest of the world and a lower resolution - no more than half D1, your card is very weak and will barely support even that. If all is set as it should then
3 - there's a software conflict and the fastest way to fix that is to reinstall the system from scratch.
If you don't know the software version or you need to update it then go here

Posted on Nov 12, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Geovision GV650-8 GV-650-8 GV 650-8 60FPS 8 CH. PCI DVR (DM6010)

Please be sure you purchased the Geovision card from a genuine Geovision dealer. You can check here for unauthorized dealers:

Aug 29, 2013 | Geovision GV650-8 GV-650-8 GV 650-8 60FPS...

1 Answer

My geovision multicam program(gv-800) will not respong I have recovered my computer and it still wont respond. Please help!

Having recovered means there was a problem before. try to install the device drivers for the video capture card all over again

Jul 15, 2010 | Geovision GV-800-16 Video Capture

1 Answer

Do any1 know is it possible to use 2 Geovision Gv 800 in one PC?

yes you can, but recording will depend on size of hard drive. i work in the trade and you will require at least a terra bit to run 32 cams for any given period

May 07, 2009 | Geovision GV-800-16 Video Capture

1 Answer

Where I can find a pdf file about installation of GeoVision 800?

Click on the link below to be taken to a site that provides Software and Manual downloads for your card.

Click Here

Feb 23, 2009 | Geovision GV-800-16 Video Capture

1 Answer

I would like to know how about the GeoVision GV-card qaulility

The Geovision card are extremely good capture card forvideo surveillance the price depandson what GV card you want to buy please visit for complete information.

you can just fill up the free quote and they will provide you with the best pricing

Dec 25, 2008 | Geovision GC-250-2 (gv-250-2) Video...

1 Answer

PC w/Geovision 650 (800S) Card reboots but safe mode fine

Sound like a bad PV800 Card send to GeoVision to Fix

Nov 21, 2008 | Geovision GV-800-16 Video Capture

1 Answer


This problem could be because of the GV card version not compitable with GV main systems software you install please check the hardware version of the GV card and compare for compatibility. East way out downgrade to lower version of software. for example if you have version 8.1 install then install version 7.0 or something like that.

Aug 27, 2008 | Geovision GV-800-16 Video Capture

Not finding what you are looking for?
Geovision GV-800-16 Video Capture Logo

Related Topics:

917 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geovision Televison & Video Experts

Rommel Balcita

Level 3 Expert

749 Answers

Mark Magill
Mark Magill

Level 2 Expert

126 Answers


Level 3 Expert

102366 Answers

Are you a Geovision Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides