Question about Televison & Video

1 Answer

Find code# for Philco portable T.V.Model# P1324c R1o2 to use RCA control

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

0054, 0019, 0145, 0030, 0020, 0096, 0463 are the codes you will need.

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.
Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. -You can rate this solution with one of four votes, if you feel your issue is resolved (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).

  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Posted on May 05, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hello,





    This thread has gone 14 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Codes for Philco DTv converter box TB100HH9 to work with RCA universal remote RCU800


RCA universal remote control have no set-up code to Philco. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name of your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

Sep 22, 2015 | RCA Televison & Video

1 Answer

Have a RCA remote RCR312WR trying to get codes to a PHILCO digital converter box


RCA remote control have no set-up code to Philco brand devices. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Visit some online sites too, which deals with electronic spare parts.

Aug 24, 2015 | RCA Televison & Video

1 Answer

Philco codes for model sz500


Codes for Philco TV, with RCA-RCR311W model remote control are:
1002, 1004, 1009, 1014, 1025, 1046, 1051, 1053, 1054,1060, 1061, 1062, 1066, 1067, 1072, 1073, 1074, 1076, 1077, 1078, 1082, 1083, 1085, 1091, 1133, 1205, 1230


Jun 26, 2012 | Philips Televison & Video

2 Answers

I Dont Know My 3 Digit Device Code To My PHILCO URC-2070 Please Will Someone Help Me


On most universal remote control, you will find the procedure to enter the builder code OR a procedure to pass through all the code of the remote, one by one and pass to the other TILL you find the right one. It happen to me numbers, a bit upsetting procedure but you'll find out...

Oct 09, 2009 | RCA 4-in-1 Universal Remote Control

1 Answer

I have a Philco DVD player and a Philips universal remote and none of the codes that I have tried work.


go to rca universal remote it gives you a ton of codes the remote may be a phillips but the code is philco so there may be codes there that are not in your manual

Aug 19, 2009 | 2001 Dodge Intrepid

1 Answer

Trying to program Philco URC-2070 remote control


I determined that the Philco Remote Control that I wanted to program for use on a Magnavox tv was too old (20+ Years) and dead. It also did not have the features of a new Universal Remote. So, I tosed the Philco remote and purchased a new Universal Remote Control.

Thanke you..

Mar 19, 2009 | Philips Magnavox 20MT1336 20" TV

1 Answer

Code needed


the codes for Prima tv using universal remot control

Jan 04, 2009 | RCA Universal Remote Control

1 Answer

Philco remote URC-2070/admiral tv code?


Asked someone else who knew the three numbers to program my tv.
FOR FREE!

Nov 26, 2008 | RCA 4-in-1 Universal Remote Control

2 Answers

Code for philco tv


Remote codes
http://www.remotecentral.com/index.html

good luck
please mark the post with a fixya

Mar 17, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...