Question about LG WM-1832C Front Load Washer

1 Answer

Lg wahser wm1832cw flashes oe on readout. nothing in drain

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,382 Answers

Hi,


If you are getting this code it is because your washing machine has tried for at least ten minutes to drain the water out of the machine. The most likely cause of this problem is that you have a plugged pump filter or you have something stuck in the pump filter.Make sure that you unplug your washing machine.To clean out the pump filter you must empty the washing machine water. The best way to do this is to manually drain the water into a low bucket or basin. Then lay a towel down to catch to remaining small amount of water. Remove the pump filter, clean out any debris, and wash out the filter. Then plug your washer back in and restart the washing machine.Check that your machine is properly leveled. A washer that is too far out of level may not drain properly. Make sure that you are level front to back as well as side to side.This solution will solve your problem


Thank You !!

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG wm1832CW Front load washer , error code OE and shut down, drain cleaned pump ok, ?


Yes, could be that the pump has dropped down on the efficiency.
check this link for tips to reset or rework the pump

Click on Pump

Jan 15, 2013 | Washing Machines

1 Answer

OE flashing and not draining


Hi,
Here is a tip that I wrote that gives more detail about how to fix the OE codeon LG washers....

LG Washing Machine OE Error Code
heatman101

Aug 16, 2011 | Washing Machines

1 Answer

Oe drain error on lg wm1832cw washer: I replaced the drain pump, it still did not correct the problem.


OE - "No Drain"

Simply means the pump is blocked. Locate and clean the filter

Jun 28, 2011 | Washing Machines

1 Answer

I have a DE code on my LG Wm1832cw front load washer. This happened last weekend, and we found that the small drain hose in the front was clogged so we got the clog out and the washer has worked great all...


IE: Water level (246) was not reached in 8 minutes
UE: Imbalance: Load too, small too large
OE: Drain problem took longer than 10 minutes to drain
FE: Overflow issue drain pump running to comp
PE: pressure sensor (sensor out)
dE: door error. open door. switch is out
LE (with a a slash in the
middle of L. Upside down F) Thermistor out
CE: Over amping Too much soap wrong soap
LE: hall sensor shorted/destroyed from sudslock
bE: Ball sensor loose connection/out of order
EE: eeprom out test mode only
PF: power failure momentary interruption of shocktricity

Service manual

May 27, 2011 | LG WM-2277HW Front Load Washer

2 Answers

Washer has water still in drum and OE on digital readout


Hi


Thanks for using FixYa. OE is a drain error, it flashes when the washer won’t drain within 10 minutes. TO resolve this issue you’ll have to check the drain pump filter for any clogs, also check the drain hose for any kinks and clean the drain pump filter. If still the issue is not resolved then you might have to replace the pump. Please do rate the solution if the issue is resolved or post a comment for further assistance.


Thanks

Rylee

Jun 17, 2010 | LG WM-2277HW Front Load Washer

1 Answer

On my front loading LG TROMM i washed several floor mats and now it keeps flashing "OE" i have drained the water out but cant get it to rinse properly>>>any ideas?


The "OE" code indicates a slow drain error and is generated if the water has not drained within 10 minutes. Check the drain line for kinks or obstructions and check the pump. Remove the hoses from the pump and use a flashlight to look into the suction port. Make sure that nothing is clogging the pump like the occasional stray piece of clothing. Check the pump impeller. Make sure there are no broken or missing blades and that the impeller will spin freely. If there are any broken/missing blades or if you cannot get the impeller to spin freely, the pump is defective. Hopefully it is nothing more than a clogged drain line, pump, or a jammed impeller. Really sorry for your trouble and I hope this helped. Best wishes.

Sep 28, 2009 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

LG WM1832CW Drain Pump


i drained it first with the pull out hose in the access panel on the bottom left. i tilted the washer back to remove it from the bottom.

Jun 17, 2008 | LG WM-1832C Front Load Washer

1 Answer

OE message on our LG WM1832CW washer


I just was searching for the same exact error on my LG WM1832CW washer. From reading the other posts on different manufacturers I realized this was a pump clog issue for mine too. There is a small door near the bottom of the front of the washer and if you open that there is a filter basket. Once you start turning it and break the seal, the water will come out quickly, have 2 flat large tupperwares so you can catch the water. Once you clean out that filter it's good to go. A 5 minute job.

Jan 21, 2008 | LG WM0642H Front Load

3 Answers

Oe code


I had the same problem. First the grinding noise during the rinse cycle and then after four weeks the OE code. LG had a local repair service come out and he determined that the drain pump was dead and ordered a replacement. Still waiting on part after only 3 days.

Dec 22, 2007 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
LG WM-1832C Front Load Washer Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...