Question about Whirlpool Duet 7.0 Cu. Ft. Super Capacity Plus Electric Dryer

1 Answer

My Whirlpool Duet Dryer will not go past the sensing stage when I press start.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

It appears your timer/main controller/CCU has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question%$#@

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get my dryer running?


You need a new machine control board

Oct 02, 2016 | Whirlpool Dryers

1 Answer

Whirlpool duet dryer goes to sensing..but wont turn on


The control board senses the inlet thermistor shorted. The inlet thermistor is a part of the hi-limit thermostat which is located on the heating element box. Here is the part to order.

Nov 26, 2012 | Whirlpool Dryers

1 Answer

My display comes on. It stays on sensing. No error code. And dryer will not start the drying cycle.


Perhaps something in the manual. If you need one, I believe they are still available here - click on link or copy and paste into your browser -www.manualowl.com
Jimmy

Apr 07, 2012 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I have a whirlpool duet dryer gew9250pw, It will not go past sensing mode. I hear a click when start button is pressed but that is it. Diagnostic test was ok. I have tried jumping the thermal fuse and...


you may have a bad motor control board they are very expensive. There are screws on rear top panel and the top slides off. The board is located on the left side. If you hear a click when you start it then there is a relay got on board.

Feb 18, 2018 | Whirlpool GEW9250 Electric Dryer

1 Answer

Whirlpool Cabrio Dryer Wont go past sensing light when I press start. The door is tightly closed and the filter is clean. It just won't even try to start it just just beeps once.


my dryer sensing light was on and dryer would not start, we replaced the sensor fuse and now it works the fuse is in back of dryer close to the bottom on the left hand side very easy to replace cost $11.00 by the way don't call whirlpool they have no clue, wanted to send repair man out to fix it.

Nov 04, 2009 | Whirlpool Cabrio 7.0 Cu. Ft. Super...

1 Answer

Whirlpool duet front loader dryer....sensing light won;t shut off


I have a whirlpool electric dryer and it cuts off and shows E 1... What is the problem?

Apr 01, 2009 | Whirlpool Duet 7.0 Cu. Ft. Super Capacity...

3 Answers

Whirlpool Duet dryer won't move past sensing function on any cycl


Found the culprit. The thermal fuse was blown. Had no conductivity with ohm meter so I placed a jumper around it and presto dryer runs. Cleaned the exhaust and fan but found no blockage and really was not that bad. Hoping maybe just a weak part. The model on the Whirlpool Duet electric dryer is GEW9250PWL I believe the the last three are just the color. The part number on the Thermal Fuse is #3392519. This is easy to get to through the front panel just below the load door. Hope this helps some else out.

Jan 14, 2009 | Whirlpool GEW9250 Electric Dryer

4 Answers

Whirlpool duet dryer won't start


whirlpool duet dryer has power but will not start--when I press start, it beeps once and the sensing light comes but the dryer doesn't start

Nov 02, 2008 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Whirlpool dryer,duet


check the door switch for operation, if the machinr thinks the door not closed == no operation

Jan 11, 2008 | Whirlpool GEW9250 Electric Dryer

Not finding what you are looking for?
Whirlpool Duet 7.0 Cu. Ft. Super Capacity Plus Electric Dryer Logo

182 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Tim Whalen

Level 3 Expert

3074 Answers

Sal De

Level 3 Expert

2699 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...