Question about Electrical Supplies

1 Answer

Need instructions for a Sportsman 7000 Watt Electric Start Generator. Can you assist. My generator will start and run for about 10 minutes before cutting off and will not start again. Need to review manual to see if I am not correctly starting.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 97 Answers

HERE click the here link for the manual with checking my books it looks like the low oil switch or the transition component before it make sure it is on a level surface and oil is at proper level i hope this helps.

Posted on Sep 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having trouble getting my BlackMax 7000 watt trifuel generator started on Propane.


Clean off the fuel connect points. Probably just not a clean line from sitting so long since last use.

Dec 25, 2014 | Honda Black Max 7000 / 8750 Watt Portable...

2 Answers

I have a rural king generator 6500 E It starts fine but after a few Minutes it dies?


It sounds like it is starving for fuel. You probably need to rebuild the carb.

Oct 21, 2014 | Sigma Powers Inc Rural King 6,500 Watt...

2 Answers

Why does the motor rpm fluctuate while running?


replace spring apparently it lost its tension for it to stay open you may also have a dirty carburetor if it does not run smoothly with the choke wide open have it serviced or clean it yourself if your mechanically inclined it should be a piece of cake.

Aug 21, 2014 | Honda Black Max 7000 / 8750 Watt Portable...

1 Answer

Dewalt 7000 generator will not stay on


Oil level switch that protects engine is activated. Check your oil level.

May 22, 2014 | Dewalt 7,000 Watt 13 Hp Portable Generator...

1 Answer

Have a 4000 watt sportsman generator that will not produce electric i have replaced the avr what next


Could be lost exciter current. This is how to restore it - Connect 16 or 18 gauge wires to a 12 volt battery. With generator running, insert bare ends of wires into AC outlet - one to Hot, the other to Neutral. Insert and remove quickly. There should be a flash and power will be restored. If not, repeat until you get that flash and output current restored. Using light gauge wires is so that if you are too slow to remove them once AC is restored. they will burn out before the battery suffers from the AC incoming. Be quick and be careful.

Mar 31, 2014 | Buffalo Tools Sportsman Series 4000 Watt...

1 Answer

Sigma 6500E generator


First verify that the breaker for the outlets is not tripped and make sure that the generator is running at full operating speed. let it run for 5-10 minutes and check for output power. If there is nothing, there are two possible problems. One could be that the automatic voltage regulator is bad. The other is that the field needs to be flashed - a high possibility if the generator has not been run in a long time. There are many videos on the internet that show you how to solve both of these problems. Just do a search for No output from a portable power generator.

Mar 20, 2014 | Sigma Powers Inc Rural King 6,500 Watt...

1 Answer

Stops and starts


Hi there,
Most home standby generators are setup to run once a week so as to keep the engine lubed up and the generator windings dry. So if yours is comming on once a week at about the same time and running for something like 15 minutes, that's what is going on.
On the other hand, if your generator is starting and the switch is transferring somewhat randomly, you could have a problem with the neutral connection in your system, the power could really be going out and coming back on, and/or the control board in your generator could be broken.

Regards,
Carl

Mar 12, 2009 | Briggs & Stratton 15,000 Watt Home Standby...

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Steve

Level 3 Expert

3287 Answers

Gene Haynes

Level 3 Expert

5089 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...