When i turn on my audiolba 8000a amplifier no sound on left channel after 1 to 2 minutes sound will come in. How to resolve this problem? If possible which spare parts need to change please state affected spare parts.

Determining the Cause of the Problem Let's assume our system has a head unit, a crossover, a two channel amplifier and two door speakers with only the right speaker working (the left speaker is not working). If the door speakers are behind the door panels then we want to make sure the speaker is the problem before removing the panel. We'll work backwards starting with the amplifier and ending at the head unit. Testing for a Speaker Problem With the vehicle and the stereo turned off disconnect the speaker wires for both the left and right speakers at the amplifier. Now connect the left speaker to the right amplifier output (which we know works). Turn on the stereo system and make sure the balance is set to the middle position.If the speaker still doesn't work then the problem is somewhere between the amplifier and the speaker Testing for an Amplifier Problem Now we'll need to see if the amplifier channel is bad. Put the left speaker back on the left amplifier channel and the right speaker on the right amplifier channel. This returns the speaker wiring to its original configuration. Again, with the vehicle and stereo off unplug the RCA cables from the amplifier's input and switch them so the left cable is in the right input and vice versa. Turn on the stereo system. Testing for an RCA Cable Problem For any intermediate components between the amplifier and the head unit follow these steps for each one. We only have a crossover so we'll just do this once. Begin by testing the RCA cables between the intermediate component and the amplifier. Unplug both RCA cables from the intermediate component's output. Now plug the working channel's RCA cable into the non-working side of the crossover. In our case the working channel is the right so plug the right RCA cable from the amplifier into the left side of the crossover. Turn on the stereo system.
If the right channel continues to work then you know the problem is in the RCA cables between the amp and the crossover. esting for a Crossover or Equalizer Problem At the input of the intermediate component (in our case the crossover) flip the RCA cables around (left to right input and vice versa). Turn on the stereo system.
If the right channel continues to work and the left channel continues to not work then you know the problem is in the intermediate component. Replace or repair this component.
If the problem is now in the right speaker and the left speaker works then the problem lies before the crossover. Turn off the stereo system and return the RCA cables to their normal places.
Testing for a Head Unit or RCA Cable Problem Pull out the head unit from the dash so you can access the RCA cables. Unplug both RCA cables from the head unit. Do not disconnect any other wiring. Plug the right RCA cable into the left channel of the head unit. Turn on the stereo system.

Have you changed the speakers to see if it is a driver, or amplifier, issue? If it follows the speaker, get it reconed. If it follows the channel, look into that channel.

It is unlikely that your have a damaged amplifier. You may have something switched wrong. In your owner's manual, you will find a procedure that says' "Return to factory defaults, or just reset". If that doesn't resolve your issue, or you need more assistance, or would like to inquire about a repair, please visit my website at audioserviceclinic.com. You may contact me there. BTW, I worked at HK. Thank you.

http://www.hifiengine.com/manual_library/audiolab/8000a.shtml

Try this...sign up first (free)

Hi,
Here's a solution to see if you have a problem with either your receiver or turntable.
The turntable has 2 RCA's one red for right channel, and one white or black for left channel, which plug into the back of the amplifier.

• Unplug both RCA from rear of amplifier.
• Plug in a cd or dvd player into those inputs on the amplifier, the sound will be lower but it will give you an indication if the amplifier is ok or not.
• If you have sound on both channels left and right then the amplifier is good
• If you still only have sound on left channel, then there is a problem with the right channel input on the amp.
  

• If your amp, is good, unplug the cd /dvd player.
• Put a record on and start playing the record
• Plug the white or black RCA from the turntable into the rear of the amplifier marked left, you should have sound.
• now unplug it from the left and plug in into the right red RCA socket, if you have sound the amplifier is working fine.
• if there is no sound there may be a problem with the stylus cartridge on the turntable
  
• now lets reverse the test
• unplug both RCA from amp.
• Plug the red RCA into the left socket on amplifier, if there is sound, turntable is working fine, if no sound there is a problem with either the stylus cartridge or that red RCA cable.
• now unplug the red RCA from the left side and plug it into the right side socket
  

• if there is no sound there may be a problem with the stylus cartridge or RCA cable.

I hope this helps

MobileJB

Check to be sure there are no speaker wires touching ground, and that the wires are connected in phase to the head unit.
Front Speakers 5 1/4" Doors Left Front (+) Green Left Front (-) Black/White Right Front (+) White/Red Right Front (-) Black/White Rear Speakers 6" x 9" Rear Deck Left Rear (+) Pink/Red Left Rear (-) Pink/Blue Right Rear (+) Pink/Light Blue Right Rear (-) Green/Red

The symptoms you are relaying definately sound like an internal amplifier problem. It is fading in and out for a reason - usually due to heat.

Have you had the radio bench tested (seperate from the car) to eliminate the car as being the culprit?

Since the radio was run with damaged speakers originally, the output or amplifier power supply on the amplifier may be bad.

As an alternative to repairing, I would suggest investing in a small 2 channel amplifier to power the speakers.

The radios claim 50W per channel, but in reality give 12-15W RMS power.

A dedicated amplifier with built in crossovers and gain adjustments will prolong the life of your speakers and add to the tonal qualities of your new speakers. Instead of turning up the volume on the head Unit, and sending out a distorted signal that will blow your speakers, an amplifier will give more CLEAN power to them, so it will be louder at a lower volume setting.

This will bypass the internal amplifier on the radio, and send a Low Level signal ONLY thru a set of RCA cables.

Good Luck!!

faulty op amps, needs to be repaired

try hooking up your subwoofers in series. then connecting them bridged to the amplifier. as follows: positive from sub#1 into positive of amplifier left channel.. negative sub#1 into positive sub#2. negative sub#2 into negative amplifier right channel. turn the gain down as this will sound pretty loud.

disconnect the cabel of left channel from your amp disconnect the cabel of right channel and put it in place of left channel if the problem goen your problem is in left speaker itself (cabel or speaker).if the problem excit the problem will be in amplifier output stage

Sounds like your Power FET's are gone. Take it to a shop that specializes in high end or vintage gear. ....good luck...Rob