I have one Küppersbusch EKE 606.3 M-12 and its with safety lock... i don't have the instrutions book anymore and i forgot the key to unlock... do you know the general key to do it?

Read in user manual, or check manufacture web site

You will have to hold the lock button down for 3 or 5 seconds for it to unlock. If this doesn't help, it could be a stuck key pad or a problem in the circuit board.
Thanks/Mike

Baumatic GECE6005 manual page 18


To disable the safety lock feature, you should press the safety lock button for a couple of seconds. The "L0" symbol will disappear from the timer display and you are then able to use the hob in normal operation.

how to unlock ilve induction cooktop

Red light on and range is locked, press but will not unlock.

safety lock is on. How can I release safety lock?

gud day,the key symbol is the lock try to unlock the unit by touching the sensor,or check the manual how to unlock.

gud day,not all models of ceramic hob have a child lock,check it 1st ur unit if have it,if we have,touch the circle w/sign of key to lock the ceramic for ur child,to unlock touch again.u see the ligth red is on it means the lock is in ON.easy to unlock even ur child by touching the key sign,for ur safety to not use ur unit,unplug the unit if it not use.

Got the same problem, and remembered I've kept the manual book
L means locked. I dont know how Ive managed to do this as well

Anyway it says:

Cancelling the key lock
After switching ON the control the child safety feature can be deactivated. Here it is necessary to simultaneously operate the front right cooking-zone-select-key and the MINUS-key and then operate the MINUS-key alone. If all steps hae been carried out in the right order within 10seconds the key lock gets cancelled and the control is OFF. Otherwise the input will be considered incomplete, the control remains locked and switches-OFF after 20 seconds.

After a renewed switching-ON/OFF key all displays show 0", the display dots are blinking and the control is ready for ooking. If a cooking zone is "hot", "H" will be displayed instead of the static 0".


Followed their instructions & still not worked. ,I am still confused and baffled after these instructions........................