Question about Panasonic DMR-E50 DVD Recorder

1 Answer

My DMR-EH50 is stuck in SP mode and when I hit the button on the remote it keeps displaying CHK REMOTE 3. Would you know what is causing this. I cannot get the unit to do anything at all.

Posted by on

  • jmichels619 Aug 24, 2010

    I read other posts and got the remote to work, however the unit will not change fropm the SP drive, could it be locked? Any suggestions?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 185 Answers

Very easy fix.

Your DVD recorder can be set up to accept remote contol signals on any one of three channels. Remote 1, Remote 2 or Remote 3.

Your remote can be set up to send signals on any of these channels. You need to make sure your recorder and remote are set to the same channel.

Your recorder is telling you that it is set to receive remote control signals on channel 3. This means your remote control is currently set for a different channel.

Assuming that you have a genuine Panasonic remote, do the following,

On your remote press the "Enter" button and hold it down. Then press the "3" button at the same time for two seconds, then release both. This will change your remote so it sends signals on Channel 3 which will match your recorder.

Those clever people at Panasonic realise that you will be delighted with their products and will probably have several of their appliances in use. The different channels avoids switching all your Panasonic gadgets at the same time. Clever huh?

Best wishes

Posted on Aug 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i press remote all I get is remote DVD 3 on display panel please help


The remote and the unit are using different command codes. You can try this:

Press and hold [ENTER] and the number 3 button together on remote (while pointed towards unit) for 10 seconds, then release. This should restore the remote command to your unit.

It might not help, but it's worth a shot.

Apr 26, 2011 | Panasonic DMR-EH50 DVD Recorder

1 Answer

I have Panasonic dmr-e95H and need to reset the


My DMR-E95H displays: "CHK REMOTE2" whenever I push a button on my "replacement" remote. Is there a way to reset the DMR-E95H without the original remote?

Apr 05, 2010 | Panasonic DMR-EH57 HDD Recorder Player

1 Answer

We have a Panasonic DMR-EH50 DVD player/recorder. We recently moved house and following the move, the FUNCTIONS button on the remote no longer works. Everything else on the remote does. I've tried...


The message displayed means that the remote control and unit are not communicating and the remote needs to be programmed. To program the remote, press and hold the same number that is displaying on the unit and the [ENTER] or [OK] button for more than 2 seconds. For example, if the unit displays “SET 2”, press and hold [2] and [ENTER] or [OK] for more than 2 seconds.

Apr 04, 2010 | Panasonic DMR-EH50 DVD Recorder

1 Answer

Pan DVD Recorder DMR-EH50


Press enter and 2 at the same time for more than 3secs

Oct 29, 2009 | Panasonic DMR-EH50 DVD Recorder

1 Answer

Actually I have a 4 yr old dmr eh50 panasonic dvd recorder


Make sure remote is set to unit code ex: press enter and 1 at same time see if this matches try enter and 2 or enter and 3 see if this matches and works

Oct 03, 2009 | Panasonic DMR-E50 DVD Recorder

1 Answer

EVERYTHING YOU NEED IS IN MY LETTER BELOW.


1. On your remote, find the record mode button; it is near the bottom on the left side. This button sets
the recording speed for the DVR. Faster recording speeds provide higher quality recordings.
2. Look at the display on the front of the machine: it should say XP ( records 1 hour on the disc,)
SP ( 2 hours, ) LP ( 4 hours, ) or EP ( 6 hours. ) You can also set it to record 8 hours on a disc,
but the quality of the recording will be poor.
3 Press the record mode button until the screen displays the recording speed that you want.
4 Note: if the powers fails or the Machine is unplugged, the machine will automatically reset itself to
SP mode.

Apr 29, 2009 | Panasonic DMR-ES40V DVD-Video Recorder

1 Answer

Remote Problems


Press and hold both the ENTER and number 3 buttons at the same time for at least two seconds and, Hey Presto!, you have regained full control of your unit!

Enjoy!

Apr 19, 2009 | Panasonic DMR-E55 DVD Recorder

1 Answer

Universal Remote says ''RC2'' for DMR-EZ27


Question (s): The remote control for my DVD recorder has stopped working. Every time I press a button, the display says "CHK REMOTE 1", "RC1" or "SET1". What is wrong? Answer/Comments: Your DVD recorder remote control can be programmed (with different codes), so it can be used with multiple Panasonic DVD players. When you press a button and the display shows [CHK REMOTE #] or [RC#] or [SET#] it means that the DVD recorder and the remote control are not set to the same code.To set the remote control code to that of the DVD recorder, press and hold [ENTER] as well as the corresponding code number on the display (1, 2 or 3) at the same time for more than 2 seconds.

Mar 14, 2009 | Panasonic DMR-EZ27K

2 Answers

DMR-EH50 DVD Recorder


Check your user guide for the answer.

Nov 08, 2008 | Panasonic DMR-EH50 DVD Recorder

1 Answer

DVD Recorder Screen keeps saying HOLD and not switching on


CHILD LOCK:

The Child Lock Deactivates All Buttons On The Unit & Remote Control.

To Deactivate Press & Hold (OK) & (RETURN) Simultaneously Until "X HOLD" Disappears.


Oct 28, 2008 | Panasonic DMR-EH50 DVD Recorder

Not finding what you are looking for?
Panasonic DMR-E50 DVD Recorder Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...