Question about Televison & Video

1 Answer

Humax lgb22drt picture disapears after 2 seconds. everything else seems to be ok. e.g recieving signal

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

From the symptoms you describe, it seems the high voltage flyback autotransformer has failed along with the horizontal amplifier (they are slaved to each other). The sound comes from the flyback unit.

Well, the only way to solve this is to get a technician take a look at the set, I'm afraid. Repairs could cost upto $100 or more, depending upon the number of components that need to be replaced,

Hope that helps!

If your issue is not resolved, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

P.S. -You can rate this solution with one of four votes, if you feel your issue is resolved (remember that at times a bit of to and fro dialogue may be necessary to resolve an issue).

  • "FixYa!" - The solution provides great advice on how to solve the problem.
  • "Helpful" - The solution provides useful leads that helps solve the problem.
  • "Thanks for Trying" - The solution does not solve the problem but the effort is appreciated.
  • "Inappropriate" - The solution has absolutely nothing to do with the problem.
Thank you for using FIXYA!

IrishDruid

Posted on May 05, 2008

  • Swilin Sampson
    Swilin Sampson May 31, 2008

    Hello,





    This thread has gone 14 days or more without a response.
    Please close the thread with a “FixYa” or “Helpful” rating.





    Or post back with latest developments, what steps you took,
    etc. and I will assist you further as best I can.





    Thank you.


    IrishDruid




×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get signal


More then likely a broken tuner within the humax box, return it to the store for repairs as no " quick " solution is known since it is a hardware problem.

Oct 04, 2016 | Humax Televison & Video

1 Answer

Why is my Humax 4000 very slow, freezing and scrambled saying bad signal.


Check the signal level and quality. Reseat all aerial connections.

Jun 18, 2016 | Humax Televison & Video

1 Answer

My picture keeps jumping when viewing anything on my humax


What about the strength of the signal? If it is very weak, this could happen. Check the signal strength first. Contact any service technician; who have instrument to measure the signal strength.
http://electronicshelponline.blogspot.com/

Nov 30, 2014 | Humax Televison & Video

1 Answer

Keep losing signal


You have a weak signal. There are many possible reasons for this, such as:

The aerial has moved or there is a poor connection.

You are tuned to the wrong transmitter.

Aug 05, 2014 | Humax Televison & Video

2 Answers

Entering keys receiver humax ir free


Tern off the device remove LNP cable then tern on the device again without satellite cable and wait for seconds the massage will gone. Reconnect LNP cable and enjoy it again.

May 05, 2013 | Televison & Video

1 Answer

I ws using my humax to watch a programme, when the picture froze.


It can sometimes happen if the signal level drops & the TV digital decoder cannot pick up the strength of the signal when the transmission is back to normal. Switching on & off again resets the processing again. This is a similar effect that can happen with cable or sky transmissions also, it acts the smae way as sometimes having to re-boot your PC if that should crash. It is not necessarily a fault with the TV.

Oct 24, 2009 | Humax Televison & Video

2 Answers

Humax 8000T not used for a while, now says ''no or bad signal'' and says no channels available when it searches.I tried resetting to default settings but still no joy. When I checked signal status it says...


sig strength 29 is too low to lock onto. Humax needs 50+ to lock ideally 65+

is the aerial ok? try the set on someone elses aerial. If no joy then its possible the tuner is duff...but thats virtually unheard of.

Oct 24, 2009 | Humax Televison & Video

1 Answer

Picture freeze lockup and no sound


It Was Solved by removeing the unit from its present site and retuned unit to winter hill in a good signal area, when unit was returned to original site it was retuned again. and operated ok. as to what was the course i have not a clue, can only think that due to thie site being a fringe signal area may be the transmitter was on reduced power or something?

Apr 10, 2009 | Humax DRT800

2 Answers

Pay tv reception


Austar recently made changes that prevent the use of their smart cards in decoders other than Austar boxes.

Assuming you are using a legit Austar smart card, you will need to use it in the Austar decoder it was supplied with, for it to work now.

Apr 25, 2008 | Humax DRT800

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72271 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

69244 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...