Question about Garden

Open Question

Hi.i have f011 fualt on masterdrive vc 710kw.motor when start runing and move slowdown have vibration and when work for 1 hours f011 occured.plz help me.i changed my motor with other motor,and check all cuvc.t300,...board and igbtes igd.but didnt solved

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: bodyguard t300 treadmill. belt will not turn

Smashed harness created short.

Posted on Jan 27, 2009

  • 1 Answer

SOURCE: My Sony T300 is vibrating and photoes are blurr

I have fixed my problem on my own and now my camera is working OK. I got a very simple solution. If anyone is facing the same problem of vibration of Sony T300 and image captured is totally blurr, can contact me for the solution on my mail id umesh.koli.68@gmail.com

Thanks for reading.
Umesh.

Posted on May 20, 2009

praky16
  • 744 Answers

SOURCE: vibrations

this is the normal problem and no need to worry. It is the camera mirror returning to its normal position when the camera is powered off....

thank u
rate me!!!

Posted on May 24, 2009

yboyandrei
  • 828 Answers

SOURCE: motherboard display problem

Hear some any beeps to your motherboard. If your hear this beeps then motherboard will identify what is the loss connection of trouble of your MOBO.
If you don't then have to remove tor clear the CMOS by removing the Lithium Battery in it.
Good luck!

Posted on Sep 29, 2009

xptareq2000
  • 1447 Answers

SOURCE: i have d845gebv2/d845pesv board starting display

It is very old mother or it supply discontinued so you replace it.There are many third party manufacturing motherboard available.You buy it and fix your problem.
Note: You must be purchase socket 478 motherboard.Esonic Brand Intel 915/945g chip.
made in china.*********** goes damage.

Posted on Jan 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i open the motor to a black&decker 71&2 inch band saw ? my saw has started to make a lot more noise when runing


There are many reasons why band saw make noise. Here's are some "few checks" to do
1. Run the band saw without blade.
2. Run with a different blade.
3. Run the motor alone.
4. Check the bearings.
Another thing; incorrect speeds and feeds can cause noise and vibration.
Regarding about opening the motor, I can't help you with that. Try to check any other band saw motor manual reference.

I have Trajan 7x12 band saw, no vibration or noisy at all, I use Haltbar blade from sawblade.com

Jun 15, 2014 | Black & Decker Saws

1 Answer

Http://www.facebook.com/people/Patricia-Geiss/100002655619425


+4917677424185 Email Transcript [HVD] ====== Start time: 1/5/2012, 2:12:7 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:12:7 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:12:7 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [YP] ====== Start time: 1/5/2012, 2:12:7 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, http://www.facebook.com/people/Patricia-Geiss/100002655619425 [YP] ====== Start time: 1/5/2012, 2:12:7 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [HVD] ====== Start time: 1/5/2012, 2:12:9 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, info@web.de [YP] GetYoutubeURLType() = -1, info@web.de [YP] ====== Start time: 1/5/2012, 2:12:12 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, info@web.de [YP] WinHttpCrackUrl() = 12006, info@web.de [YP] GetYoutubeURLType() = -1, info@web.de [YP] GetYoutubeURLType() = -1, info@web.de [YP] ====== Start time: 1/5/2012, 2:12:51 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, info@web.de [YP] WinHttpCrackUrl() = 12006, info@web.de [HVD] ====== Start time: 1/5/2012, 2:14:48 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:14:48 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [VC] ====== Start time: 1/5/2012, 2:14:48 [VC] Module VC Log Version = 1,7,15,426 [VC] OS Info 6 0 S 2 0 [YP] ====== Start time: 1/5/2012, 2:14:48 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, http://www.facebook.com/people/Patricia-Geiss/100002655619425 [YP] ====== Start time: 1/5/2012, 2:14:48 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [HVD] ====== Start time: 1/5/2012, 2:14:49 [HVD] Module HVD Log Version = 2,12,32,426 [HVD] OS Info 6 0 S 2 0 [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] ====== Start time: 1/5/2012, 2:14:51 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] WinHttpCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] ====== Start time: 1/5/2012, 2:15:11 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] WinHttpCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] GetYoutubeURLType() = -1, snc4/203372_100002655619425_1800818_n.jpg [YP] ====== Start time: 1/5/2012, 2:15:15 [YP] Module YP Log Version = 2,12,32,426 [YP] OS Info 6 0 S 2 0 [YP] InternetCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg [YP] WinHttpCrackUrl() = 12006, snc4/203372_100002655619425_1800818_n.jpg

Add Your Solution Or Ask For Clarification

Feb 09, 2012 | Health & Beauty

1 Answer

Whynter Portable Air Conditioner Model: ARC-14S. Problem: It sounded as if something fell inside the unit while it was operating (cooling) then it started to vibrate horribly. The vibration is only...


Hi,Whynter Portable Air Conditioner has many moving parts, and they all make noise and cause vibrations. Some of these parts are more likely to causing shaking and loud noises, and sometimes this signals a larger problem, something to watch and scrutinize. If serious enough, it calls for a repair.

Loose Parts

Loose parts cause the majority of shaking and vibration noises in your air conditioner. A few of the most common loose parts include the air compressor, the piston rods and even the fan or blower unit itself. These noises are clunking, clanking sounds that occur along with a vibrating action. The only method of repair is a complete compressor replacement, which is a repair only a certified air conditioner technician is qualified to make. The compressor is a fully sealed component, so individual parts in the compressor cannot be repaired.

Fan Blades

Fan blades cause noise, shaking and vibrations even when properly secured. If fan blades contact the exterior structure of the air conditioner due to a bent fan blade or broken and misaligned grate, a constant, repetitive noise and vibration results, which sounds like a ticking or banging from the interior of the air conditioner. Vibration in this case is limited but still present.

Mounting Brackets

When an air conditioner shakes, there is a problem with the mounting brackets. These brackets hold the air conditioner compressor steady as it operates. Normal vibrations and shaking would otherwise occur without these brackets. A loose mounting bracket causes the air conditioner to rock back and forth and creates a clanking sound. As the compressor starts up, this rocking and clanking sound begins, resulting in a very loud and fast vibration and noise. It also occurs when the unit shuts down.

Other Sounds and Vibrations

Sometimes air conditioners squeal, hiss, hum or screech. Each noise is often accompanied by a vibration. Humming sounds along with a vibration may indicate a bad capacitor, the electrical part responsible for starting the machine. Hissing sounds tend to indicate a pressure problem while screeching and squealing sounds are fairly common in window air conditioners and in central air conditioners. This sound is also a result of the compressor motor. It usually starts when the unit turns on and continues through its normal operating cycle. Vibrations always occur in the air conditioner due to moving parts and the compressor motor's operation.


Hope it helped..

Aug 18, 2011 | Whynter Portable Air Conditioner

1 Answer

Hotpoint wt761 is showing error codes f05 and f011 can you help


Hi from retired Englishman in SW France,
Hotpoint (Indesit) 'f05' decodes as 'pressure switch stuck on full' and 'f011' as 'pump/draining error' which leads me to gently suggest as a first step that you clean the drain motor lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to spin or release the door lock if there is any water still left inside.
Here are my guidance notes for checking both the drain motor filter and the drain motor ;-0)
-------------------------------------

If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!) and most are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play!

REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT!
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. If it doesn't work then the motor is malfunctioning!

Hope the filter is the problem and good luck!
John C

Mar 25, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

My treadmill work fine when i turn it on but when i step on it the blet. slows down to crawl.


What make/model is the treadmill? What speed does this behavior occur? Does the walking belt slip, while the motor and rollers continue to turn? If the walking belt is slipping then the motor belt needs to be tightened. If the walking belt slows with your weight on it, does this happen at 1-3 mph and still occur at 4-5 mph? It could be your body weight causing it to slowdown, try to increase the speed to 4 or 5 and see if it still happens. If so, is the treadmill rated for your body weight? Please be more specific.

Feb 08, 2011 | Exercise & Fitness

1 Answer

2001 R6 press the electric tart button and it buzzes


hi...

der may b several reasons

1. charge in battery may b low so try t after changing the battery
2.der may b some short circuiting occuring wen u press the start button
3.the is too much load on the starter motor which wen starting current in more picks up and gradully reduces its speed.
4.motor insulatioin may be gone so short circuiting may occur inside motor.

so plz check all these things...

Jul 04, 2010 | 2000 Yamaha YZF-R6

1 Answer

VSX7000 series VC remote site cannot see the video of near end


hi
for video conferencing at such long durations over IP, it is a MUSSSST to have dedicated stable bandwidth at all the locations.if that fails, symptons like the one u experieced are possible.this will generally happen during working hours when bandwith usage by pc's is high!!!!!

Dec 15, 2008 | Polycom VSX 7000 Video Conference

1 Answer

Laptop stuck


sound like you are running low on memories, or runing low on hard drive space.
if yo are runing WIndows Xp/Vista. go to
start>>programs>>accessories>>system tools>disk cleaner.
select all that apply and press enter.

Dec 10, 2008 | Dell Latitude D600 Notebook

1 Answer

Loud intermittent vibration in 1997 Toyota Land Cruiser


100 series landcruiser auto 98 model 226000 km
whine from front end after 25 kmh no noise when backing off

Nov 23, 2008 | 1997 Toyota Land Cruiser

1 Answer

Engine Vibration


it can be injector nozles some times when the opening presure is difrent reading.
also when the engine mounting is weak it makes vibration on the engine.
first i would like to advice you to check injector presure INJECTORS TESTER.
Check the engine mounting,

have nice day.

Nov 01, 2008 | 1996 Toyota Corolla

Not finding what you are looking for?
Garden Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2475 Answers

john h

Level 3 Expert

10993 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...