Question about Uniden DECT 6.0 Cordless Telephone Expansion Handset

1 Answer

Searching.... I set up the three phones that make up the Model 28112 Series. Everything was working fine. Now, one of the phones will not work. The message on the screen is Searching...... or it says Out of Range. I have switched the hand sets and the other hand sets work fine. I have unplugged the unit and pretended to reinstall the system. I have referred to the user's Guide. Please help.

Posted by on

  • 2 more comments 
  • roro473 May 10, 2008

    Just one of the handsets will not work. I have plugged it in in the same room and the handset reads OUT OF RANGE or SEARCHING....



    Even when the handset is on the main cradle it will not work.

  • Anonymous Sep 21, 2008

    I bought these phones from Costco. They were looking fine and then they stopped working...totally! Someone help!!

  • Anonymous Oct 04, 2008

    I have 5 handsets, bought at costco and 1 of them just says searching . . . I am trying all the ideas. . . and none of them work -- it still just says searching

  • Anonymous Mar 16, 2014

    I went to answer the phone and one hand set gave a message "searching" and then quit working. This is the Uniden D3280 Series that has stopped working

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The problem of searching.....

After trying all the technician's suggestions had failed; I disconnected the base to return it to the store for replacement. Then I decided to try disconnecting and reconnecting power and phone line, placed handset back on base and the phone reset itself and is working fine...

Recap:

Disconnect power and phone line from base for about 30 seconds and reconnect both power and phone line to base and place handset back on base; it should reset...

Linda

Posted on May 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cannot stop Searching message flashing on screen


I emailed tech@doro-uk.com and within two or three hours got a helpful email suggesting the following:

In the first instance please try disconnecting the power to the base station and removing the batteries from the handset for 15 minutes or so. Then reconnect everything and check if this has resolved the fault. This will re-synchonise the handsets to the base station.

The problem is now resolved.

Thanks.


Apr 09, 2009 | Phones

1 Answer

Phone noise


get a new cord the one from head set 2 phone.

Aug 18, 2008 | Uniden Cordless Phone

1 Answer

Ge cordless Model 28112 6.0


I found out that I needed to puch the program button. the manual was not clear on this.

Thanks

Apr 02, 2008 | Phones

1 Answer

GE MODEL 28112 DECT 6.0 CORDLESS PHONE


I contacted GE today and they told me how to get the caller ID to work on the additional handsets. You must follow these steps in the exact order given.

#1 - unplug the base phone
#2 - unplug the telephone line from the base phone
#3 - remove the battery packs from the phones
#4 - wait 10 minutes.

reverse the order when assembling. Put battery packs in phones, put the telephone line back in the base phone and lastly plug all phones back in. It takes about another 10 minutes after that before all phones start recognizing caller ID but it now works fine.

Mar 26, 2008 | GE 28112 Trio Cordless Phone

1 Answer

Model 28112 Series DECT 6.0 Cordless


Take it back right away. I waited 126 days thinking it would get better but 3 days ago it stopped taking messages completely.
Thge volume buttons never did give me a menu

Feb 27, 2008 | Uniden Cordless Phone

1 Answer

Registration


I'm not sure from your description exactly what your problem is, but I have the 28112, and it has a handset menu command for registration, and one for deregistration. If this sounds similar to yours, I'd suggest trying the registration command. If that fails, try deregistering, and then try to register again. I've also heard that these units somehow reset after 20 seconds in the recharge cradle, but I haven't seen that actually appear to work.

If you have problems getting the menu command to work, write back with more info and I'll see if I can figure it out based on what my phone does.

Jan 20, 2008 | Uniden Cordless Phone

6 Answers

GE dECT 6.0 Cordless Model 28112 Series


On the base is a button next to the GE logo that says "Do Not Disturb". Pushing that button will enable and disable that feature

Dec 08, 2007 | GE 28112EE2 Cordless Phone

1 Answer

Model28112 series cordless phone multi phones 4 total


This does not sound good. If you have one working phone and you have swapped batteries around and still the same single phone works.... you know it's not the base unit, charger stands, power supplies or batteries. You have eliminated everything but the phone itself. Unfortunatley these low end cordless phones cannot be expected to last. 6 months is pretty bad but I'm not surprized. These sell for $30 each new and I bet a replacement battery is $20.

Jul 01, 2007 | GE 28112 Trio Cordless Phone

Not finding what you are looking for?
Uniden DECT 6.0 Cordless Telephone Expansion Handset Logo

711 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Phones Experts

kakima

Level 3 Expert

96683 Answers

Dave Ellis

Level 2 Expert

84 Answers

k24674

Level 3 Expert

7987 Answers

Are you an Uniden Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...