Question about VeriFone (M19755014US1) Magnetic Card Reader

3 Answers

I have a verifone Nurit 8020 which displays "Tampered Device". The company says I need a replacement. Is there any way to fix this?

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • VeriFone Expert
  • 113 Answers

Nurit OSP Loader is the the program we use to remove the TAMPER error. Replacing the internal battery and reloading a fresh NOS (nurit operating system) will remove the error. Check our website at freshpoint.org or call us if you can at (775)358-2922 . It can be fixed, you don't need to replace it. thank you.hope this help : - )

Posted on Aug 01, 2012

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Do you have available Nurit 8020 terminals currently?are you purchase any tool for this? if no i have tamper recovery tool for this device.

Posted on Nov 22, 2010

  • psoftware109 Jan 03, 2011

    you need to purchase tamper tool for this pos device at psoftware109@gmail.com.

  • tpalczer Feb 21, 2011

    I need a "tamper tool" for our Nurit 8020...how do we go about resolving? Thanks
    Terry
    Scotland Forever
    972 814 3752

×

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 59 Answers

Nurit OSP Loader is the the program we use to remove the TAMPER error. Replacing the internel battery and reloading a fresh NOS (nurit operating system) will remove the error. Check our website at freshpoint.org or cal us if you can at (775)358-2922 ask for Randy. It can be fixed, you dont need to replace it. thank you.

Posted on Jul 10, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i load paper into the verifone nurit 9020


There is no 9020. Did you mean a Nurit 8020?

Jul 12, 2014 | VeriFone Nurit 8020

2 Answers

Tamper on verifone 8020


You need a new terminal. I Highly reccomend an upgrade to something that meets current standards. The 8020 is in an end of life status. They are no longer manufactured and do not meet EMV nor PCI 3.0 requirements.

Mar 08, 2014 | Lands Phones

2 Answers

Reset nurit 8020


If you have a "tamper message" this will need the NOS to be reset. This download can be done but the battery may be weak. call Frank @ 775-338-6634

Aug 16, 2013 | VeriFone Nurit 8020 Gprs Upgrade Your Old...

1 Answer

Nurit 8020 will not power up


Your external battery probably totally discharge or maybe your machine is not charging the battery anymore because of the broken or bad IRDA (i/o) ports from where you connect the power adaptor to the machine or the worse part is the charging chip inside the machine is already bad that needs to be replaced. The good news is is it can still be repaired. Give us a call if you still needs help at (775) 358-2922 as for Randy or visit our site at http://freshpoint.org

Oct 18, 2012 | VeriFone Nurit 8020

2 Answers

Nurit 8000 error message tampered device how to fix


Your Nurit 8000 internal battery is already bad that needs to be replaced or your plastic case is broken your internal sensors were disturbed. After replacing the internal battery, then reload the NOS (Nurit Operating System)from Nurit OSP Loader to remove and clear the tamper. A little bit of work but it can be fixed. Call Us if you still needs help . (775) 358-2922 ask for Randy or check our website at Freshpoint.org. thanks

Jun 09, 2012 | VeriFone VX570 Credit Card Terminal (Dual...

2 Answers

Nurit 8020 - Change NOS - Remove SECURE


If you are just reloading a NOS in your Nurit 8020 machine, even if your machine is secured you should be able to load it, make sure your com1 baud rate setting is the same, your 8020 is set to 115200 baud rate, and should set up your com1 at the same speed...hope this will help and if you still need more help you can call us at (775)358-2922 ask for Randy. Thanks

Jan 03, 2012 | VeriFone (M19755014US1) Magnetic Card...

3 Answers

I have a Nurit 8020 that shows "tampered device" is there any option to fix it rather than have to purchase a new one?


Nurit OSP Loader is the the program we use to remove the TAMPER error. Replacing the internal battery and reloading a fresh NOS (nurit operating system) will remove the error. Check our website at freshpoint.org or call us if you can at (775)358-2922 . It can be fixed, you don't need to replace it. thank you.hope this help : - )

Aug 10, 2011 | VeriFone (M19755014US1) Magnetic Card...

2 Answers

V # 8020 have new battery & cord. displays comes


if you still seeing the backlight of the display, your lcd maybe bad in shape. the display assembly needs to be replaced. or maybe some other problem causing it too. if you still needs help on your verifone8020, call (775)358-2922 look for randy and maybe we can help you. thanks

Jul 12, 2011 | VeriFone VX510

1 Answer

Dropped my nurit 8020 on the ground. Now when I turn it on, the first screen says self test please wait followed by the machine info and secured. Then it goes to a screen that reads tampered device/alarm...


To make it useable we need to remove the tamper first. Nurit OSP Loader is the the program we use to remove the TAMPER error. Replacing the internal battery and reloading a fresh NOS (nurit operating system) will remove the error. Check our website at freshpoint.org or cal us if you can at (775)358-2922 . It can be fixed, you don't need to replace it. thank you.
hope this help : - )

Jun 12, 2011 | VeriFone (M19755014US1) Magnetic Card...

4 Answers

I have a verifone nurit 8020, When i go to reset the password, The machine says "Tampered Device Press any key REPLACE PAPER press any key" Is the machine still usuable? Thanks for your help guys.


To make it useable we need to remove the tamper first. Nurit OSP Loader is the the program we use to remove the TAMPER error. Replacing the internal battery and reloading a fresh NOS (nurit operating system) will remove the error. Check our website at freshpoint.org or cal us if you can at (775)358-2922 . It can be fixed, you don't need to replace it. thank you.
hope this help : - )

Jun 18, 2010 | VeriFone (M19755014US1) Magnetic Card...

Not finding what you are looking for?
VeriFone (M19755014US1) Magnetic Card Reader Logo

2,362 people viewed this question

Ask a Question

Usually answered in minutes!

Top VeriFone Televison & Video Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Bosse Photos

Level 2 Expert

221 Answers

Rozan Perry
Rozan Perry

Level 1 Expert

14 Answers

Are you a VeriFone Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...