Question about Sharp AR-M207 All-In-One Laser Printer

1 Answer

My copier is sharp AR-M207 all in one printer is problem E1-00

Posted by on

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

Communitcation error between the MCU PWB and the IMC PWB. Check connections.

Posted on Aug 24, 2010

Testimonial: "What is mean MCU PWB & IMC PWB? pleace send me clear"

  • 8 more comments 
  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

  • Chad Kliever Aug 25, 2010

    If you take the back cover off there are some circut boards there, just double check to make sure all wires are set tight and not loose. If everthing looks and feels good on the keypad press pound-star-clear-star and enter sim 14 and press copy button, select yes and the copier should restart, if the code comes back you will need a trained tech to come and check all the connections with a meter to determine if one of the boards is bad.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a printer software to enable me print with my window 7 software


To help you install printer software for Sharp AR-M207, please find the link given below and find the topic mentioned as 'Software' and select Windows xp:
http://www.sharp-cee.com/cps/rde/xchg/scee/hs.xsl/-/html/product_details.htm?product=ARM207

GuruAid.com

Mar 31, 2016 | Sharp Used AR-M207 Copier Printer Scanner

1 Answer

I need a software that can enable me print from my 26 bit computer and my copier AR-M207 PHOTOCOPIER


You can download a printer driver from here.
http://www.sharp-world.com/support/download.html
Microsoft is ending support for Windows XP so I would suggest updating your operating softwaere.

Mar 09, 2016 | Sharp Used AR-M207 Copier Printer Scanner

1 Answer

No drivers Win Vista 64 -Sharp AR-M207 !!


Go to
  1. www.sharpusa.com
  2. Customer support tab
  3. product downloads
  4. product category (mfps and printer)
  5. model number (scroll to bottom and choose not listed)
  6. type in AR-M162
  7. Download type (driver)
  8. Search..... choose driver from below.

Sep 21, 2009 | Sharp AR-M207E Black and White Copier

2 Answers

Hooking up my Sharp AR-M207 Printer to my computer


yes you can put in the serial # of the printer and there site will tell u what u have to do

Nov 10, 2008 | Sharp AR-M207 All-In-One Laser Printer

Not finding what you are looking for?
Sharp AR-M207 All-In-One Laser Printer Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Office Equipment & Supplies Experts

Anthony Karuku

Level 2 Expert

255 Answers

k24674

Level 3 Expert

7993 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Sharp Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...