Question about LG RZ32LZ50 32 in. LCD Television

2 Answers

HD READY Hi I have the above TV and have been told that i can get leads to connect to my virgin plusbox and get HD TV. Can you tell me where I can buy these leads? I live in the UK. Thanks

Posted by on

  • mid ulster Aug 09, 2008

    I'm trying to connect a freesat HD box to my tv. Alas no HDMI socket on the tv but the freesat manual mentions using a dvi converter. I've had a search on the internet and there are a bewildering number of variations on this particular piece of kit . Can you direct me to the type of converter I require?

    Many thanks

    Stephen


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What connection does the V+ box have?

If its an HDMI connection, about 1.5 cm wide and 0.5 cm tall, you'll need an HDMI to DVI (Digital Video Input) converter cable. Plug this into the DVI input to the left of the Scart sockets when looking at the back of the TV. You should be able to get one from Currys/PC World/local HiFi shop.

If you get a message "Going to DPMI mode", it means that the DVI isn't receiving a signal. Check your manual for the V+ box and the TV to make sure that they're set up compatably.

I recently bought an Onkyo AV Receiver and run the output from it into the TV using one of these cables. Picture is upscaled to 1080i by the Onkyo and, with 5.1 speakers, its great.

Good luck

Posted on Dec 06, 2008

I have the same TV & I've tried connecting it through "component" & the DVI but neither work & a Virgin media tech says only an HD TV will work 'the boxdoesn't recognise component

Steve

Posted on May 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just purchased a Samsung LE46C650 LCD tv and it is connected to a pioneer receiver and Virgin V+ HD box. The tv picture lags the surround sound by about half a second. Any way to sync the picture and...


No,half a second that not consider a problems.There are hundred of hardwares and softwares design by dozen of compannies and corporations.Putting these diveces together 100% functionals are not gaureentee.99.99.....% out of 100% is not cosider a problems.

Nov 20, 2010 | Samsung LN46A630 LCD TV

1 Answer

Could you please tell me if my LC-32GA5E tv can work with sky HD.The manual tells about switching to hd mode,but there seems to be no where to connect hd to the set.The tv is about 5 years old. thanks...


This is an HD ready TV and can definitely be used with Sky HD, but ONLY if the Sky box is connected to the TV with an HDMI cable. It will not work if connected with a scart cable.

So you need 2 things. Firstly, you need to buy an HDMI cable (see picture) if you haven't already got one. Secondly you need to locate the HDMI sockets on your TV and Sky box. The sockets will have the HDMI logo (see picture) next to them.

Please rate my solution if you find this helpful. Thanks.330cd4e.jpg

Oct 16, 2010 | Sharp LC-32GA5U/LC-32GA5E 32 in. HD-Ready...

1 Answer

How do you connect the Virgin VHD box to LG RZ32LZ55 TV for getting HD and also the audio. For the audio the V HD box has a optical audio port and a test port ( i am not sure it works!). The TV has a DVI...


All you need is an hdmi-dvi adapter. You will also need a component audio lead to plug into the mini(3.5) jack socket on the tv as dvi does not carry sound. You will need to initially use the scart to set up your tv for hdmi as the menu can only be seen via the scart until you set it up.

Jul 24, 2010 | LG RZ32LZ55 32 in. HD-Ready LCD Television

1 Answer

Hi. Just found this site. I have a Samsung LE32B450C4W TV. I am not technical at all and Virgin Media have installed us a V+ HD box today. However, I have now discovered when I turn the TV off and back on...


You should try this way. Unplug the box and replace by DVD player or others with HDMI output and turn/on off to see the TV keeps changing HDMI sources or not. If it is changed, you have to call service to replace the main board. Else, your TV works well.

Nov 12, 2009 | Samsung LE40R73BD 40 in. HD-Ready LCD...

1 Answer

I have a samsung tv and dvd player and it has just started coming up on screen when i load a dvd to play a region error messagesayinh no good.It has been working ok before this.i just recently upgraded my...


make sure your tv is set in right language and location because after the big re-tune you might of entered wrong ones
the best way to do this is reset back to plug & play put tv in analog mode press TV/DTV on remote and then MENU ( NOT DTV MENU ) move down until you see plug & play in one of the menues press enter and follow on screen instructions

Nov 07, 2009 | Samsung LE32R72BX 32 in. HD-Ready LCD TV

1 Answer

Connect tv to cable box with hdmi lead


You will need an HDMI to DVI cable which are available in the shops, even ASDA has one but I don't know how good it is. Or you can buy an adapter that will plug into one of the ends of the HDMI cable and then plug into the DVI socket at the back of the TV. The DVI input is video only so you will need audio leads for sound. These will connect from the output of your source, say, blue ray or sky HD (Left and right audio sockets ) to the audio L/R at the back left of the TV (on the block next to the three component video connections and s-video connections)

Oct 03, 2009 | LG RZ32LZ55 32 in. HD-Ready LCD Television

1 Answer

Problem with tv sender


Hi,i learned on another forum that if you connect an hdmi cable apparently it disables the functions of the scart sockets,especially where the remote control is concerned.This is something to do with virgin media's setup and not any equipment fault.If you want to go back to two room viewing try unplugging the hdmi lead.

Jun 22, 2009 | Philips Flat Panel Televisions

1 Answer

Wish to retune it to the new signal from virgin tv


It would be best to contact Virgin supportin your country for instructions.

Visit www.virgin.com and select you location etc.

May 23, 2009 | Samsung LE40R71B 40 in. HD-Ready LCD...

1 Answer

Digital TV


It is HD ready, which means to get HD you will need to connect a HDMI cable to a HDMI source such as a SKY HD / VIRGIN HD SET TOP BOX or a HD DVD player to take advantage of HD.

Jan 22, 2008 | Sansui HDPDP4200 42 in. HD-Ready Plasma...

Not finding what you are looking for?
LG RZ32LZ50 32 in. LCD Television Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

The Knight
The Knight

Level 3 Expert

68223 Answers

Are you a LG Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...