posted by qaziinam on May 05, 2008
When I switch on the copier display H and than 4.. please solve my problem with thanks.
Best Solution
posted on Jun 04, 2008
hi
can you help me with the same problem?
i do not understand the part "Main code Start key Sub code Start key"
thanks in advance
can you help me with the same problem?
i do not understand the part "Main code Start key Sub code Start key"
thanks in advance
Was this solution helpful? Show your Appreciation by rating it:
Solution #2
posted on May 11, 2008
1. Entering the simulation mode
Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.)
If the machine dies enter code 14 then press start, the machine will reboot normal, if the problem persist, the fuser unit needs replacement
Perform the following procedure to enter the simulation mode.
"C" key AUTO/TEXT/PHOTO key
"C" key AUTO/TEXT/PHOTO key
Main code Start key Sub code Start key
(Note:Perform the first four key strokes quickly allowing no more than one
second between key strokes.)
If the machine dies enter code 14 then press start, the machine will reboot normal, if the problem persist, the fuser unit needs replacement
Was this solution helpful? Show your Appreciation by rating it:
Suggest a new solution for this problem
Post a New problem for Toshiba e-Studio 161 Copier Copier
Email this problem
Post a New problem for Toshiba e-Studio 161 Copier Copier
Email this problem
Can you Help with these Copiers problems?
Toshiba e-Studio 161 Copier Copier
when i on copier it display H-4...
when i on copier it display H-4...
hi can you help me with the... Answer This...
Toshiba e-Studio 161 Copier Copier
Changing Developer on E-Studio...
Changing Developer on E-Studio...
I have tried everything but i... Answer This...
Repair Service
Find Copier Repairman Near You:
