Question about Apple iPhone Smartphone

1 Answer

Installer isnt working

Hi I have a new unlocked Iphone version 1.1.4 and have read lots of articles on here about downloading new software.

However when I try to download anything it simply says "package download failed" what am i doing wrong, does it need to be connected to the computer when I try, wifi is working fine but cannot access edge as it is not activated as I am on a pay as you go sim with O2 but with an internet bolt on.

Cheers Sue

Posted by on

  • A0oddbod May 10, 2008

    Sorry to be a thicko how do I clear the queue ??



    Many thanks Sue

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Clear the queue...and restart the iphone
everything will b fine...ven i had the same problem

Posted on May 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i unlock a apple iphone so it can work with other sim


Now a days there are lot of ways available to unlock the I- Phone,but to unlock the i-phone use the remote unlock service ...I have got the remote unlock service from here Theunlockarena and unlocked from Network Lock!!!It's simple and easy way to Unlock.......
Follow the instructions below and unlock it step by step:
1. Wait for us to send you an email saying your phone has been activated or remotely unlocked.
2. Install the latest version of iTunes.
3. Make sure your Apple iPhone phone software is updated to the latest version using the iTunes software.
4. Connect your Apple iPhone to iTunes with a NOT ACCEPTED SIM card.
5. Wait until iTunes detects your Apple iPhone.
6. Disconnect your Apple iPhone and reconnect it after 10 seconds.
7. Your Apple iPhone is now unlocked.

*NOT ACCEPTED : We mean, to use a Sim card from a network other than the network your Apple iPhone is locked to.

Aug 30, 2011 | Samsung Cell Phones

5 Answers

Got a virus through text in my iphone


Hi,

Could you please tell me which firmware version you are running?

Feb 14, 2008 | Apple iPhone Smartphone

Tip

Jailbreaking your iPhone 3G/3GS with OS Version 3.1.2


There's tons of information available on the internet on how to jailbreak your iPhone. That's the positive, and that's the negative too! You get stuck with questions like "will this method work?", "how is method 2 different from 1,2,..1000?" and so on! I thought I'd make things a little simpler by giving you a method that worked for me, and a lot of my friends on both 3G and 3GS models. So here we go:
Step 1: Preparing your iPhone.
Restore your iPhone by connecting it to iTunes. Download and install the latest version of the OS 3.1.2 (as of now).
Step 2: Get iTunes out of the way!
End the process "iTunes helper" from the Task Manager (Windows) or Activity Monitor (Mac)
Step 3: Download the Blackra1n software here: http://www.blogsdna.com/5465/download-blackra1n-rc3-to-jailbreak-unlock-iphone-3g3gs-3-1-2.htm
Step 4: Run Blackra1n and let it do it's thing!iPhone will restart now.
Step 5: Disconnect your iPhone from computer, and look for an app named "blackra1n" in the phone. Open it, and install the packages listed in the app: Cydia, Rock and Sn0w.
Step 6: Restart phone
Insert your new sim and enjoy your jailbroken iPhone 3GS!
For more information, visit: http://dontwannaluv.blogspot.com.

on Jan 12, 2010 | Apple iPhone Smartphone

1 Answer

Hi, i have an iphone 3gs, and has unlocked it. but yesterday i updated the iphone with new version from itunes, and after updating my iphone is not working atall. its shows as emergency call.


An unlocked phone must NEVER be updated. Updating the software ios takes out the unlocked version and replaces it with an Apple/AT&T locked version

So your gonna have to get it unlocked again, and this time. don't ever update it. Sync is ok, but never update.

Aug 28, 2011 | Apple iPhone Smartphone

1 Answer

I found a iphone and it is locked, and I need to unlock it to use it.


Up until recently, those of us with an iPhone 3G had to use it on the AT&T network. Not anymore! After months of development and research, the guys over at the Dev Team have released the worlds first 3G unlock method. Unlocking will allow use of the iPhone on any network, and also the ability to install 3rd party applications not available via the App Store. This article will walk you through the steps in order to finally free your iPhone.
  1. 1 First, you will need to download the QuickPwn software. It is available in both Windows and Mac formats, and both download links are provided in the resources area of the article below.
  2. Step 2
    Make sure you are running the most current iTunes and iPhonemag-glass_10x10.gif versions. You must have iTunes 8.0.2. You can check what versions your iPhone is running by going to Settings->General->About on your phone and then looking for Version and Modem Firmware listings. The most current version is 2.2 (5G77) and the firmware is 02.28.00. If you do not have these running on your iPhone, the unlock will not work.
  3. Step 3 Create a backup of your iPhone using iTunes.
  4. Step 4
    Launch the QuickPwn program, making sure you have your iPhone on and plugged in via usb. Press the big blue arrow button to continue.
  5. Step 5 Next, QuickPwn will search for the firmware file on your computer. It should be able to find it on its own, so just press the blue button to continue.
  6. Step 6
    Next, QuickPwn will ask you if you want to install Cydia, Installer or to replace boot logos. In order to unlock, you MUST install both Cydia and Installer. Once done, press the blue button.
  7. Step 7 This is the tricky step. And not because its hard – its just so time-sensitive! In order for QuickPwn to begin its magic, the iPhone has to be in “Recovery Mode”. To achieve this, you are going to have to press some buttons! Don’t worry though, QuickPwn will highlight each step, and even count the seconds for you! First, you will hold down the HOME button for 5 seconds (the home button is the circular one on the face of the phone). Once that 5 seconds has passed, you will continue to hold the HOME button down, as well as the POWER button for 10 seconds. The power button is the one on the top of the phone, that you (duh) use to power the phone on and off with. After those 10 seconds go by, keep holding the HOME button down, but release the POWER button. Keep holding the HOME button down until QuickPwn tells you that the process has begun.
  8. Step 8
    Now, sit back, and try not to have a heart attack. QuickPwn will write the modified files to your iPhone, and for the most part, will keep you informed of what it’s doing. You might see some random lines of code on the screen of your iPhone, but it is nothing to be scared of.
  9. Step 9 Once complete, your iPhone will reboot and then be recognized by iTunes. When asked if you want to set this up as a new phone, or restore from a backup, select the backup option. This will allow you to choose the restore point we just made before starting this whole process. The restore process can take a while, so don’t sweat it. This is especially true if you had a ton of music and applications on your iPhone. It took about an hour or so for it to complete mine.
  10. Step 10
    Once complete, look for the Cydia icon on your phone. Open it, and go to the "Sources" section. Click the + at the top of the screen, then type this web address to add the following source: http://apt9.yellowsn0w.com
  11. Step 11 Install the Yellowsn0w program and reboot your iPhone, making sure your with SIM card is inserted. Wait about 90 seconds for carrier lock; if you are still unable to connect, pull the SIM card out and try again

Nov 24, 2009 | Apple iPhone 3G

2 Answers

Iphone queries


get cracked sofware off www.appoulo.us

Nov 04, 2008 | Apple iPhone Smartphone

1 Answer

Unlocked iphone can't receive 1.0.2 update


ok this is wat i suggest just update to 1.1.1 its same thing this is also 4 any1 that wants to unlock there iphone. download firmware 1.1.1 place it on your desktop connect your iphone 2 your pc. now hold the home button and the sleep button at the same time until u see the connect to ituners or usb and cd depending on what firmware you have this is restore mode. go to itunes it will say your iphone needs restoration hold shift click restore an window will open up 4 u to chose wat file ul be using for restore use the firmware 1.1.1 that i told u to download it will restore your iphone but will get and error at the end. dont worry after that open up ibriker and click on boot iphone and ul be at the activation screen

Jan 22, 2008 | Apple iPhone Smartphone

Not finding what you are looking for?
Apple iPhone Smartphone Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Cell Phones Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Lesley Cameron
Lesley Cameron

Level 3 Expert

353 Answers

Are you an Apple Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...