Question about Frigidaire 24 in. FDB126RB Built-in Dishwasher

2 Answers

Dishlex 450 Hello, I have a dishlex global 450 and on the screen panel it is flashing NF do you have any idea on how to fix this problem. I understand this means no fill, the water is coming into the side of the dishwasher but not actually entering. Regards Helpless lady!!! Who is sick of washing dishes!

Posted by on

  • rj_rich Sep 28, 2008

    hi there, i have the same dishwasher and the same problem with the NH code coming on the screen...i don't have a maunal and i think it means no heat..is this true?  can anyone help me?  thanks

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hello,
I had this problem and reset the dishwasher to solve. Turn off dishwasher for at least 20 seconds, turn on while pressing eco button and wait for about 30 seconds. Should hear beeps.

Posted on Jul 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,314 Answers

Start at the water valve and start checking from there take the line loose from the sink and run some in a bucket if its comming out the incomming line strong replace the water valve

Posted on May 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dishlex global300 is gone into flood mode how do I fix it


Dishlex Global 300 Dishwasher issues - Kitchen - Home - Whirlpool ...

forums.whirlpool.net.au > Home > Kitchen

WhirlpoolAug 31, 2011 - As stated in the title, it is Dishlex Global 300 model and it was here when ... is flooding about to happen inside the DW and prevents flooding). Bosch or Asko dishwasher
Mar 7, 2014
Dishwasher that actually WORKS PROPERLY?
Dec 3, 2012
Dishlex Global 300 dishwasher woes
Aug 8, 2005
Dishwashers ...
Mar 28, 2004
More results from forums.whirlpool.net.au

Nov 25, 2015 | Dishwashers

1 Answer

I have a dishlex global 450 it is displaying two backwards c's any ideas is there a fuse or anything....thanks


Hi
I do not recall this being a valid fault code.
If nothing at all works, it sounds like a faulty control board.
I hate to say it, but with the age of a Global 450, it may be more economical to replace the dishwasher.
Generally the board is quite expensive, and as the global series are quite loud and power hungry, it might be a good excuse for an upgrade.
Adam

May 29, 2013 | Dishwashers

2 Answers

Dishlex Global 300 starts to fill with water, then


ok this sounds like your water has stopped coming in or timed out b4 the pressure switch is activated. hold eco button down, u will hear a beep then a light will come up, keep pushing the button until u see the light.reply and tell me which light has come up, and i can help u fix the problem.

Apr 24, 2010 | Dishwashers

1 Answer

Dishlex global 300.... The normal light starts flashing mid wash


i think it means the water heater in the dishwasher is not working,or the element is shot.
my 300 had a burning smell before the light started flashing.

Feb 07, 2010 | Electrolux Dishwashers

1 Answer

Dishlex Global 300. Eco light flashing and nothing happens.


could be the water inlet valve or solenoid

Jan 25, 2010 | Dishwashers

2 Answers

I have a dishlex Global 500 which runs for 3-5 minutes then displays nF


nf= not filling. check inlet vale, or fault will be with pressure switch. If you have poor water pressure, you may need to increase the fill time- insructions can be downloaded from:www.electrolux.com.au, click on "customer service", then "download manuals", then Dishwashers-semi integrated, electronic, then download Dishlex Global Part 1 and Part 2.
Information on setting fill time can be found at the back of Part 2, but Part 1 has a list of the fault codes

Aug 05, 2009 | Dishwashers

1 Answer

Dishlex Global Unable to remove heater element retaining screw


I have a simialar problem with the Dishlex 450 Global model, after searching for the heating element on line, I found a picture of the element (450 model), showing that the Stainless Steel screw is actually spot welded to the element bracket, hence you should be able to remove it by accessing a retaining nut from underneath the dishwasher....(turn power off first!)..

May 24, 2009 | Electrolux 18 in. ESL4114 Slim-Line...

1 Answer

No idea how to put filters in Dishlex Global 450


G'day Megan.

I just pulled my dishlex apart (AGAIN ) and I'm sure that there is some sort of --- hang on while I go check this out!!!!! --- Wait --- Yep, if you look at the part itself and read around the ring it says "PUSH THIS CUP FIRMLY DOWN TO SECURE FILTER", Errr. Yeh - very informative

The part you are talking about goes into the bottom filter LAST with the pipe thingy sticking up in the air like a tower.

If you still can't figure it out, let me know and I'll photograph the assembly and re-post.

Grumpy Plumber

Jan 16, 2009 | Dishwashers

1 Answer

Dishlex global 500 rinse and wash problem


This was due to a faulty pump motor which I have now replaced.

Jan 10, 2009 | Dishwashers

Not finding what you are looking for?
Frigidaire 24 in. FDB126RB Built-in Dishwasher Logo

1,340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Dishwashers Experts

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Carmen Mikulic

Level 2 Expert

409 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Frigidaire Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...