Question about Kyocera CS-2050 Black and White Copier

1 Answer

Print is lighter in middle of page than the rest of the page

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Could be a number of things causing this.

Try cleaning the charge wire to do this open front cover and by the waste toner bottle their is a green tab grab this pull it out until it stops and push it back in. Do this several times.

The optics could be dirty I noticed it said prints up above Do you actually mean prints sent from computer or copies. If it is prints from the computer, it might be the developer unit. If copies than turn the unit off and take off the platen glass clean all the mirrors you can slowly move the lamp assy to the side to give yourself room to reach all the mirrors. It will slide back to the home position when the unit is turned back on. Use windex on a paper towel to clean the mirrors.

If you have any more questions just ask. I am a certified on this model and most others.
Hope this helps.

Posted on Aug 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Pages are printing, but part of the page has really light, some unreadable printing while rest of page is fine. What do I need to do/change?


If the colors on printed and copied documents are too light, blurry or not as bright as expected follow the steps listed below:
1. Verify the toner save mode is turned Off. When you set the toner save feature to On, print appears lighter.
a. Press Menu, 1 (General Setup), 6 (Ecology), 1 (Toner Save).
b. Press the up or down arrow key to select OFF and then press OK.
c. Press Stop/Exit.
2. Print a document from your computer or print a demo page by pressingthe FAX and COPY keys at the same time.

Oct 26, 2010 | Brother MFC-9840CDW Laser Printer

1 Answer

When printing on my Canon Pixma MP500, there is a dark black line down the middle of the page. As the pages print, it gets lighter and lighter, but is very dark on the first one. Any thoughts?


Ink tends to overflow at the bottom guide rollers and the roller gets coverd in ink and causes the black line!The best will be to take it to a dealer and have it cleaned!Good Luck!

Apr 16, 2010 | Canon Pixma MP500 All-In-One InkJet...

2 Answers

Left side of page prints lighter than rest of page


You should contact Dell about returning these for a replacement, it sounds to me like a manufacturer's error.

Jan 27, 2010 | Dell 1320c Laser Printer

1 Answer

Faded vertical section on a printed page.


this problem occurs due to dust particles in the paper feeder belt (steel rod with rubber ) clean it and print

Sep 06, 2009 | Samsung CLX 3160fn All-In-One Printer

1 Answer

A white strip in the middle of a printed page


You should first try a new toner. Ther may be something stuck inside the toner cartridge. You might also try cleaning out the inside to be sure there isn't something blocking the light flow. If it still continues to happen there may be a problem with the fuser unit.

Dec 13, 2008 | HP LaserJet 1022 Printer

1 Answer

Left side of page lighter than the rest, you can't hardly read it


It sounds like the develop blade on your imaging unit needs to be cleaned. If you either clean it or buy a new one. If you are interested in cleaning it yourself I can send you a document on how to do this.

Jun 26, 2008 | Samsung CLX-3160 All-In-One Laser Printer

1 Answer

Deskjet HP 6940


this might be a software problem also. please specify which software you are using to print these banners. Thanks

Jun 12, 2007 | HP Deskjet 6940dt InkJet Photo Printer

1 Answer

Left hand side prints faintly


inside the toner unit, there is a stirring device to broadcast toner over full width of drum. I will guess this is the culprit, the stirring device is not turning. Try this test: remove the toner cartridge and shake it rapidly back and forth. Then try a print, any change?

Jun 07, 2007 | Minolta magicolor 2400W Laser Printer

Not finding what you are looking for?
Kyocera CS-2050 Black and White Copier Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Henry Gertcher

Level 2 Expert

48 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...