Question about Uniden Radio Communications
The only information I could find on the Colt is that it is "similar" to the BC560XLT. You can download and print the 560 operating manual via the link below. I hope it helps.
Posted on Aug 25, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Ok doc, I'll see if I can walk you thru this as there don't seem to be a manual available for download.
* Push manual button and bring it around to channel #1
Enter the freq including the decimal point. Push the E button to enter the freq into the first channel.
* Push manual again and move to channel #2 and repeat.
If you need some new freq's for your area, go here, click on your state, county, and it'll give you a complete rundown.
If you need 10 codes for your area, go here and click on your state.
If you need anything else, let us know,, Mechanic
Posted on Feb 20, 2008
danval, I looked up a pic of your scanner and it is pretty straightforward. If it is the 16 channel I was looking at, here is the step by step programming.
1- Push manual button to go to the channel you want to start programming.
2- Enter the freq number in.
3- Push the E button to enter it in the memory.
4- To review what you programmed, push the Review button.
5- Use manual button to step to next channel and start over from #2
That should get you started with the scanning hobby.
The scanner has a Priority button that when activated will stop scanning and go immediatly to the priority channel if someone keys their mic.
If you need freq's (or more of) for your area, go here and click on your state and county and it'll give you a complete listing.
Hope this helps you out, let us know,, Mechanic
Posted on Feb 12, 2008
here is a few sites that can head you in the right direction.www.radio reference.com,www.scannermaster.com,www.bearcat1.com.hope these help
Posted on Dec 04, 2008
I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:
1. Press the MANUAL key to advance to the channel that you wish to reprogram.
2. Enter the new frequency, including decimal point.
3. Press the ENTER or E key.
4. Start over with step one to continue programming channels.
Posted on Aug 16, 2009
Tips for a great answer:
Oct 11, 2014 | Radio Communications
Sep 25, 2014 | Uniden Bearcat Pro PC78LTW 40-Channels...
Mar 07, 2013 | Radio Communications
May 20, 2010 | Radio Communications
Aug 24, 2009 | Office Equipment & Supplies
Jul 31, 2009 | Uniden BCT8 Base Scanner
Dec 25, 2008 | Radio Communications
Nov 14, 2008 | Radio Communications
Aug 11, 2008 | Radio Communications
453 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: