Question about Garden
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the carbuator has two 2 adjusting screws on it.one is high side and the other is low side.start by turnig them both in until they touch bottom.now turn them both out 1 1/2 turns.this should start and run saw.throttle saw up to full throttle and adjust high side in until you get the best RPM out of saw.do not adjust high side any less then 7/8 turn out from bottom.if you do you will burn saw up from to lean burn.once the high sie is set now adjust low side until the saw will idle by it's self.let me know if this helped you.......
Posted on Jun 01, 2009
If the ignition and fuel supply systems are good that is correct. I was not able to find a McCulloch 484. Are you sure that is the model number?
Posted on Dec 19, 2009
Your saw is listed here:
Chainsaws 32cc-35cc-38cc Anti-Vibe
The IPL (exploded parts list) for your saw is the only detail for fuel line routing and it is sketchy at best; components are listed but may be on different illustrations. The primer is displayed but not listed, and there is no part number. Before you get to deep please contact OrderTree.
Use the IPL as a guide for disassembly/reassembly.
This is typical routing and a couple of hints.
OMs for McCulloch are tough. harder than replacing the fuel line. Have your saw within easy reach they will want the serial number and a few other things.
Operators Manuals: are much more difficult. I have dialed this number many times (Contact Us - All McCulloch Products 1 (800) 521-8559) and have yet to get a satisfactory response. Please try this! If enough of us try they will fix it! If unsuccessful with McCulloch try here:
Beg for manuals thread (ArboristSite - free to join). Please use the search function first, it has probably been asked and answered.
Good luck with your project. HTH
Posted on Feb 20, 2010
Posted on Apr 16, 2010
Testimonial: "Thanks exactly what i was after,thanks again."
Posted on Feb 08, 2011
Tips for a great answer:
Nov 29, 2016 | McCulloch Garden
Oct 31, 2015 | McCulloch Garden
Mar 26, 2015 | McCulloch Garden
Oct 24, 2012 | Garden
Sep 07, 2011 | McCulloch Garden
Apr 20, 2010 | Standard Oregon Chainsaw Chain For...
Feb 17, 2010 | McCulloch Garden
Oct 22, 2009 | McCulloch Garden
Mar 23, 2009 | Standard Oregon Chainsaw Chain For...
Dec 15, 2017 | Garden
Dec 14, 2017 | Garden
1,225 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: