Question about Intel PENTIUM-4 865GV CHIP MOTHER BOARD (MBP4I65GV) Motherboard

3 Answers

MotherBoard Sound jumper settings. Intel D865GLPeso Extream.

I have installed a used D865GL Peso board, I believe it may be an ex server board. Sound drivers all installed OK. But still no sound. Can't track down a user manual to check jumper settings. I'm running a P4 3.2 / 800 with dual ram, Runs increadably fast and very well. Any advice will be greatly appriciated... Rin.

Posted by on

  • Anonymous Mar 21, 2014

    Computer would not boot up to any screen. Power Supply checks OK. Blew out with air compressor to clean and then found a circuit board jumper at bottom of the desktop. I Need jumper settingssettings for the motherboard to see if that will fix the problem. Thank you in advance.



3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I am sarith .Can u help me in getting the sound for my system.My machine is intel P4 2.26Mhz with 256 mb of RAM.But the problem is this ,I cannot get any sound from my PC .Possible problem causing things like Speaker, driver & its settings every thing OK.I think its prob with the mother board settings.Can u help me please.My mail ID is

Posted on Aug 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 333 Answers
  • boff1 May 05, 2008

    Hey there - why only 'thanks for trying' - you got the lot!


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Expert
  • 86 Answers

Choose your operating system at the following link:

and download what software you need.

and here:

for the manual

Posted on May 05, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Video problem

Hi,Thanks for using fixya,

Switch off the computer and open the pc cover.
First check the ram,and clean by eraser or with solvent and install again.If the problem is same, install the ram to another computer to ensure either it damage or not .If the problem is same change ram.

If same as before, remove the cmos battery or clear the cmos jumper and hold" on off "switch for 40 seconds. Install battery again and start pc.

Now please check the "smps" by another new or by your"smps" to another pc to confirm either it damage or not.clip_image003.jpgclip_image004.jpgclip_image005.gif

If same as before now please take a risk and ready to chip label repair,
1.Change all the bad capacitors, beside the processor, with the help by nearest technician.
2. Set an identification Mark, on the bios chip, by the permanent marker because you need to remove and install it. It could not be possible for all mother board.clip_image011.gifclip_image012.gifclip_image002.gifclip_image013.gif
3. Remove bios chip from base, clean with solvent and install it proper again.It could not be apply for all mother board.ONLY FOR INTEL PLATFORM
4.For Intel mother board ,install a floppy drive and switch on the power and, watch the "led light",( floppy drives )either Blink with a long times or not.
If the floppy drives led light on, download updated bios your Intel mother board,and use a floppy disk for restore the bios , Download link.

5. Don't switch off your motherboard at the time of updating the bios, so please use ups and insert the floppy, along with bios file. Set the cmos jumper in recovery mode (just change the normal position). switch on motherboard, hope, through these processes,should recover the mother board.
If the problem is same, try to install a graphics card. For same problem I will recommend you for new motherboard.

Hope this helps,.
Thanks for using fixya.

Feb 18, 2011 | MSI K8MM-V Motherboard

1 Answer

How to clear bios with jumpers intel s875wp1-e mobo

From the manufacturer's web-site:

download the "specifications" document for your motherboard.

Jan 02, 2010 | Intel Server Board S875WP1-E (S875WP1LX)...

1 Answer


Intel specs:

It supports DDR400, DDR333 or DDR266 SDRAM DIMMS
(DDR400 is the best)

Sep 30, 2009 | Intel Desktop Board D845BGL Motherboard

1 Answer

No sound

Here is some great PC solution by Some FIXYA EXPERT. Get any kinds of PC solution from bellow.

  1. Intel MotherBoard
  2. Mercury Motherboard
  3. Gigabyte Motherboard
  4. MSI Motherboard
  5. P5GC-MX/1333 Motherboard
  6. via


Apr 09, 2009 | EliteGroup P4VMM2 Motherboard

1 Answer

Soundcard, modem driver and video controller (vga compatible)

Turns out this Model uses a motherboard manufactured and directly support by Intel.

Your Motherboard is an Intel Model # D865GL

you can find all the drivers for it at the following link*+XP+Professional&lang=eng&strOSs=44&submit=Go%21

hope this helps you out,

Nov 20, 2008 | Computers & Internet

5 Answers

Intel DG31PR Motherboard

Did you get an error message during install of the (system with the SATA 160GB drive)? Make sure the 160GB drive is shown in the bios. Than go to the title, Boot in the bios & make sure the SATA 160GB is listed in the boot order. (Preferred 3rd. boot device)
Please go to the SATA drive's manufactures site & download either their bootable floppy or CD setup software. (It’s free)! Use their software to setup the FAT & cluster size on the drive. You can even set other features that neither the bios or windows can do. Format the 160GB drive with the software as well. The manufacture's software does a better job than windows. If the 160GB drive is a SATA 2.0 leave the jumper on the drive alone. The Desktop Board supports four Serial ATA channels (3.0 GB/s) via ICH7, connecting one device per channel.
Again, please run the manufactures setup software for your SATA 160GB drive. (Disconnect any other drives that may be in the system until windows is installed).
Intel's web site here:

Good luck ameyaniks!
If I missed something, just let me know.

Sep 11, 2008 | Intel DG31PR Motherboard

2 Answers

Audio output problem in Desktop motherboard

if you use back panel sound

so need to jumper setting on mobo
jumper short 1-2 , 5-6 , 8-9

audio jumper is near by front side pci slot 1,2

Mar 01, 2008 | Intel D845GVSR Motherboard

1 Answer

Restart win operating

Have a look at the bios and see if it loses the time, it may be the cmos battery is flat, and also in the standard cmos settings, enable Halt on all Errors and it may give a clue to the fault.

Dec 18, 2006 | Intel D865PERL Motherboard

Not finding what you are looking for?
Intel PENTIUM-4 865GV CHIP MOTHER BOARD (MBP4I65GV) Motherboard Logo

Related Topics:

1,248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts


Level 3 Expert

2600 Answers

Alun Cox

Level 3 Expert

2678 Answers


Level 3 Expert

781 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides