Question about JVC Everio GZ-MG130 Camcorder

1 Answer


I have a GZ135 JVC hard disk handycam..
Whenever i am writing on the DVD the entire process is going on smoothly..
But when the software says - BURNING DVD - the DVD light blinks normally,AUTHORING goes on smoothly, then after sometime it says 'CANNOT COMPLETE TASK - ERROR CODE FF030C00 & the DVD comes out...
pl help...

Posted by on

  • 2 more comments 
  • beccylynn Nov 04, 2008

    exact same problem as above with same error code after it goes through the entire process

  • Anonymous Nov 12, 2008

    i have the everio gz-mg330 and i am having exactly the same problem ,but with error code ff053005. its driving me potty, and i wish i'd never bought the damned thing .....

  • csssMR Dec 20, 2008

    The very first DVD I created went perfectly. When trying to create a second copy, the "Authoring" process went fine, but as soon as it switched to "Burning DVD", the process was interrupted and the disc was pushed out. Error code FF030C00 was displayed. I tried this process 4 times, each time with different discs - no success. I then tried the same disc three more times. On the third try, it produced a DVD (my second successful copy). I then contacted JVC technical assistance in Toronto. They advised that I should try the PowerDirector Express Program. I did and I was able to produce two more DVD copies in a total of 6 attempts. The process was interrupted several times ia exactl the same place - after "Authoring" but before teh DVD was burned. There seems to be a common problem with both programs and I am not sure how to proceed. If anyone has any ideas, Please let me know. It would be most appreciated.

  • Anonymous Feb 05, 2009

    i have the same problem



1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Bij hert branden gaaf hij deze code.
hoe kan dat?

Posted on Jan 03, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

JVC Everio MS100RU memory camcorder. When burning to a DVD, I get an error at about 99-100% and it will not complete. The error code is EB020B88. Any ideas?

1) I shut down ALL unnecessary processes, especially McAfee

2) I switched to white-coated DVDs. I read somewhere (can't now find the url), that drives that write to DVD-ram as well as other formats need the white-coated DVDs (I used Sony), as opposed to the silver-coated ones (Verbatim, Memorex, HP. [I used Nero, Info Tool, to diagnose my DVD drive.]

3) Changed burn speed to 4x.

Mar 02, 2010 | JVC Everio GZ-MS100 Camcorder

1 Answer

Burning video clips to DVD, gets to 53%, error cannot write disc

pls try to make a copy of dvd on hard disk folder when in the end it asks where to put the dvd after processing dont put it directly on the dvd first process and put it on hard disk folder and then burn it using any free tools or like nero burning rom or any other dvd burning software it sometimes happen when u try to put the movie directly to dvd during processing avoid this

pls let me know if i can help u more , i will suggest DVD movie Factory for video editing and dvd making it is paid service but it is easy and worth it

pls rat eme fixya if i have fixed ur problem

Jan 26, 2009 | Sony Handycam DCR-TRV265E Digital...

1 Answer

Everio gz-mg130 error code ff037201?

Hey there,

I have the solution to your burning problem mate. It isn't a problem with your camera, it's with the dvd-burner.
The dvd burner has an outdated driver. You need to go to Control Panel, and System, then Device Manager. Click on the +plus sign next to Disk Drives and double click on the disk drive device listing. If you now hit the Driver tab, you'll see the Date and Version of the driver. Note this to compare to drivers you might find online.
Now type in the exact device name into google, followed by the word 'driver'. A bit of searching and you should find one. (That is if you haven't already tried just hitting the Update Driver button!)

Install, reboot and try burning the disk then. It should work.

Hope that helps

Chris (ziraffa)

PS That's the manual for your camera that I found while searching the forums, in PDF form. Just for future reference.

Dec 21, 2008 | JVC Everio GZ-MG130 Camcorder

1 Answer

Trying to transfer video from hard drive to laptop

You can download the instructions manual from JVC web under hagemeyer company

Dec 15, 2008 | JVC Everio GZ-MG130 Camcorder

2 Answers

Error code FF030C00

I use the Everio exterio burner and only dvd- and JVC disks do not use the plus DVD
The computer did has problems and Vista did for me the burning in the Spanich

Jan 02, 2008 | JVC Everio GZ-MG130 Camcorder

3 Answers

Power cinema NE

I am looking for a solution to my software problem when I bumped intoyour query and right after that a possible solution.
Here is the link... I hope it works

this one allows you to make 98 insted of just 50..goodluck

Oct 13, 2007 | JVC Everio GZ-MG21 Camcorder

Not finding what you are looking for?
JVC Everio GZ-MG130 Camcorder Logo

Related Topics:

603 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Video Cameras Experts


Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Larry Stiles
Larry Stiles

Level 2 Expert

287 Answers

Are you a JVC Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides