Question about Washing Machines

1 Answer

Westinghouse LF708C fault code SE - Washing Machines

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Washing machine goes through cycle but does not spin, or spin is cut short and clothes are still dripping.

Posted on Sep 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front loader LF708C comes up with SE error code, and may run for a minute or so, then stops. This code does not appear in the owner's manual..are you able to help?


Hi, you may find the outlet pipe has a blockage and the system shuts down and stops if the water level does not reduce quickly enough (or the drum may not be turning?.
Hope this helps.

Aug 30, 2011 | Westinghouse Washing Machines

1 Answer

The display is showing se during the spin cyccle???


Hello there and than you for choosing fixya
LG error code SE LG washing machine error code SE indicates a "motor fault" although the code also says it could be a main PCB fault. They recommend to, "try the motor first". It's vague and you really need an engineer to try and sort this one. You can't possibly justify "trying the motor first" if you are a DIYer unless you at least know how to test a motor for faults and check its connections.

Jan 25, 2011 | LG Washing Machines

1 Answer

Washing Machine 8kg - Westinghouse LT8195A is showing fault code 1f. What is the full description of this code please?


Hi,

I was unable to figure out any error which says 1F. I suppose you wanted to say F1.

Check the fault code status :

http://www.appliancefactoryparts.com/applianceshvac/help-center/fault-codes/fault-codes-washer.html

F1 means Water supply/low water fill .

Thanks

Mar 02, 2010 | Washing Machines

1 Answer

Westinghouse LF708C fault code SE. not spinning. what needs to be fixed?


SE refers to a sensor error, remedies include checking all connections plugs: § The connector (5pin, male, white) in the Wire Harness is not connected to the connector (5 pin, female) of Hall Sensor in the MOTOR. ?_? reconnect or repair the contact in the connector The electric contact between the connectors (5 pin, male in the Wire Harness and 5 pin female in the Hall Sensor) is bad or unstable. ?_ Reconnect or repair the contact in the connector ? The connector (6 pin, male, natural) in the Wire Harness is not connected to the connector (6 pin, female, natural) of PWB ASSY(Main) or the electric contact of connectors is bad/unstable. ?_ Reconnect or repair the contact in the connector ? The electric contact between the connectors ¡a6 pin, male in the Wire Harness and 6 pin female in the controller(Main)¡bis bad or unstable. ?_ Reconnect or repair the contact in the connector ? The Wire Harness between Hall Sensor in the MOTOR and PWB ASSY(Main) is cut(open circuited). ?_ Repair/replace the damaged WIRE HARNESS ? The Hall Sensor is out of order/defective. ?_ Replace the Motor ? The controller(Main) is out of order/defective. ?_ Replace the PWB ASSY(Main)

Jan 22, 2010 | Westinghouse Washing Machines

1 Answer

Error code se


can you check the temperature sensor , i know thats not the same fault , the fault to the sensor is be but check the sensor , at the bottom of the tub between the heather connections

Jun 18, 2009 | LG WM-2277HW Front Load Washer

1 Answer

0E flashing on Westinghouse LF708C Washing Machine


Had the same problem. After checking that all the hoses etc were clear and no blockages, then suspected that the pump (cost $90 Australian dollar) was faulty. The Westinghouse service technician acknowledged that that was probably the problem, which I then confirmed by pulling out the pump, and then carefully connecting 240V across the pump terminals. Certainly was a faulty pump. So I spent the money on a new pump and installed it and now the washing machine (6 to 7 years old) works fantastically.

Apr 10, 2009 | Westinghouse Washing Machines

1 Answer

WD8074-FHB washing machine SE on display


LG washing machine error code SE indicates a “motor fault” although the code also says it could be a main PCB fault.
They recommend to... “try the motor first”.
It’s vague and you really need an engineer to try and sort this one.

You can’t possibly justify “trying the motor first” if you are a DIYer unless you at least know how to test a motor for faults and check its connections.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Dec 26, 2008 | Washing Machines

1 Answer

Se error on westinghouse mastermind 711 any ideas?


SE error is a sensor problem.This code means that the speed of the electrical motor can no longer be controlled. The velocity sensor placed just behind the motor is probably damaged but it can be also the electronic board where is connected this sensor, or the wiring between these two items.

Dec 11, 2008 | Washing Machines

2 Answers

Westinghouse Front Loader LF708C


You will find that the pressure sensor sampling tube is blocked with soap deposits. Needs to be cleaned out for the sensor to work properly.

Jul 18, 2008 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

839 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...