Question about Pentair Minimax NT Heater

1 Answer

Pressure SW LED lite and ERR error code with service LED lite.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 366 Answers

Either you have a problem with the pressure switch or your filter is very dirty or your impeller is clogged. make sure the flow is good, then check the pressure switch.

Posted on Aug 24, 2010

  • danish gas Sep 12, 2010

    I have the same condition but the manual says if the SW light is on, that is a good thing and means the flow is ok. Saw what possible reasons does the ERR light come on for? I have confirmed good flow and SW light is on. thanks

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What does it mean when the blood pressure cuff reads E1


If your blood pressure mahine is like those fro Walgreen's:
Walgreen's Blood Pressure Error Readings.
Error Codes

Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level

Mar 31, 2017 | The Health & Beauty

1 Answer

What is Err 7 on the medline Finger SAT Pulse Oximeter


Error7" displayed on screen Error 7 means the emission LED or reception dioxide is damaged. Check the emission LED and reception dioxide.

Jul 22, 2015 | Medline Onepiece FingerSAT Oximeter

1 Answer

How do you fix error code eo1 and err


For one, you have a multi-cooker, it is not a pressure cooker. Try posting your question in the Slow Cooker category.

Oct 03, 2014 | Euro-Pro Ninja 3-in-1 Cooking System

1 Answer

Hello, I have an old model of blood Pressure monitor _Type 6054_ and I lost the notice. I have some error code that I don't understand. Please could you tell me what does mean this different error...


I have this problem too, after 9 years of reliable use. I can't find my manual either. From what I can see, the pressure release is going much faster than normal, too fast for the device to measure the BP. So i assume there is a problem with the air pressure relief valve, or there's a leak in the bladder system in the cuff. Looks like it's into the bin for my device.

Feb 04, 2011 | Braun Health & Beauty

1 Answer

Digital wrist model # SR303S, shows error 3, has new batteries


Possible explanations and work-arounds based on various blood pressure monitors..net is if it has worked religiously like mine had and this error comes up, and the simple fixes below do not work, there is something internally wrong with the unit..there does not seem to be any customer reset or obvious fixes..contact the manufacturer for service..

Error Description Potential cause and remedy

«Err 3» No pressure in the cuff
An adequate pressure cannot be generated in the cuff. A leak
may have occurred. Replace the batteries if necessary. Repeat the
measurement.

---------------------------------------
Error Codes

Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level
--------------------------------------
Error No. Possible cause(s)
Err 1 No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.

Jan 04, 2011 | Samsung Health & Beauty

2 Answers

Walgreens HD303 Blood Pressure Monitor error 3


Possible explanations and work-arounds based on various blood pressure monitors..net is if it has worked religiously like mine had and this error comes up, and the simple fixes below do not work, there is something internally wrong with the unit..there does not seem to be any customer reset or obvious fixes..

Error Description Potential cause and remedy

«Err 3» No pressure in the cuff
An adequate pressure cannot be generated in the cuff. A leak
may have occurred. Replace the batteries if necessary. Repeat the
measurement.

---------------------------------------
Error Codes

Err 0 No pulse is detected
Err 1 Inflation rate is too low
Err 2 Systolic reading unattainable
Err 3 Cuff pressure is too high
Err 4 Diastolic pressure is outside of operation range
Err 5 Cuff deflated too fast
Err 6 Cuff deflated too slow
Err 7 Systolic pressure is outside of operation range
Err 8 Overall pressure is outside of operation range
Err 9 Cuff is unable to inflate to the necessary pressure level
--------------------------------------
Error No. Possible cause(s)
Err 1 No pulse has been detected. Cuff may be positioned incorrectly.
Err 2 The arm was moved during the measurement.
Err 3 Inflation of the cuff took too long. The cuff is not positioned correctly.

Apr 08, 2010 | Walgreens Wrist Blood Pressure Monitor

1 Answer

Number codes for giving connections to HDD led,Power led, Reset SW & Power SW to motherboard


Those are really tricky and always vary from motherboard to motherboard.
without the exact model no one will be able to tell you exactly. But I'd recommend that you start out with the power (pw) plug and try trial and error. The only ones really necessary are the pw and reset. the only 2 that are polarity sensitive are the HDD light and pw led.

Apr 18, 2009 | Intel Motherboard

2 Answers

Sharp AR-160 has an error code CH when you power it on


Actually that means your out of ink. Odd code, but that is what is means.

Jan 29, 2009 | Sharp AR-160 Copier

3 Answers

PH SIG ERR: 39:02:


phone sig error mean your Phone MonsterPack(software) is demaged. you need to flash back using RSD lite to make back to normal. give me what software version you have on your cell and what bootloader you have..eg.bootloader 0A.30/0A.52..SW:R479 and etc. i these so i can upload one for you

Jan 14, 2008 | Motorola Mobility RAZR V3i Cellular Phone

Not finding what you are looking for?
Pentair Minimax NT Heater Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pentair Pool & Spa Experts

Pj Kiley
Pj Kiley

Level 1 Expert

21 Answers

Jay Finke
Jay Finke

Level 3 Expert

1343 Answers

Bill Jordan

Level 2 Expert

372 Answers

Are you a Pentair Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...