Question about Singer Sewing Machines

1 Answer

Where in Idaho Falls Idaho can I take a singer sewing machine to have serviced? Just go away I keep asking the same same thing over and over and over a gen and never get a answer!!!!!!! Why???????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 109 Answers

I found three places in Idaho Falls that look promising. The first one is Jones' Sew & Vac and are supposed to specialize in Singers. Their number is 208-552-2567 and they are located at 302 S 25th E, Idaho Falls. The next two didn't list phone numbers, only addresses. Brady's at 1445 E Lincoln Road and Gary's at 1576 W Broadway both in Idaho Falls. Hope one of these places can service your machine for you. Thanks for contacting FixYa.

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Singer sewing machine


I'm not sure what you're asking. If you're asking how you can replace the spool pin that is on the machine, you don't need to. Just put your spool in the back of the machine, away from the sewing area on the right, and put it in a coffee cup or Mason jar, and feed the thread from there. Many owners of embroidery machines--which are just sewing machines with an embroidery unit attached--routinely do that--it tends to feed more evenly that way.

Aug 07, 2014 | Singer 6510 Sewing Machine

1 Answer

Talk talk email


Take it to a repair shop for them to advise and quote

Mar 06, 2014 | Singer Sewing Machines

1 Answer

Singer Futura3 software load keep getting Failed to initialize security


contact singer customer service and ask them if the software is
for windows 7 or do you need some type of patch or do you
need to use the compatibility settings?

Dec 20, 2012 | Singer CE-100 Futura Computerized Sewing...

1 Answer

I have a Pixie Plus that I have not used in awhile. I just put in new batteries and when I turn it to L and H, it just made a loud hum and the needle did not move.


Your machine is jammed. This is probably due to storing it with out cleaning it first. Dust and dirt combined with machine oil can gum up the workings and make things seize. You'll need to have this serviced. Once serviced, if you choose that root.... ask about the best way to store your little machine to keep it in good working order.

Feb 05, 2011 | Singer Pixie Plus Sewing Machine

1 Answer

Doesn't want to sew, beeps and doesnt go. could it be that it needs oil?


I would thoroughly clean and lubricate the machine, look at your manual and see how to take off the throat plate and clean out the bobbin area. Make sure that there is not lint (sometimes it looks like felt, and there is no such thing that should be in there). Now insert new needle (flat side facing away from you). Try again. If, that doesn't work, call Singer at 1-800-4singer and ask them for advice

Dec 27, 2010 | Singer 7442 Mechanical Sewing Machine

1 Answer

I have a Singer 2732. I did not use for a couple years and I do not have the manual. The thread will NOT stay on the Arm. It will sew for a bit and then it falls off. I am wondering if I am threading it...


http://www.singerco.com/resources/threading.html, this will tell you how to thread. I am thinking that you do not have the cap that you put over the thread spool to stop it from falling off. Until you can get one, how about taking the top of an empty pill bottle and making a hole in the center and sliding it on the spool pin. Then call Singer at 1-800-4singer and order the real thing, you can also ask them questions on operating the machine. It looks like they do not have a manual for your model for free, it is $15.

Dec 09, 2010 | Singer 2732 Mechanical Sewing Machine

1 Answer

Singer Sewing machine is not working properly. for service purpose i want a person who can come to home and do their itself.


you can call the assistance of singer sewing machine store. talk to there manager and asked for the technician of your singer sewing machine

Feb 10, 2010 | Singer 3116 Simple

2 Answers

My Singer Futura keeps telling me that I have installed the small hoop and need to change it to the large hoop...but I have actually installed the large hoop. It is giving me an incorrect error message. I...


Make sure you have the latest software version. Current version you may check in About dialog under Help submenu and in the same submenu you wil find a function Live Update.
Also make sure you switch on the sewing machine either with the large hoop connected or without hoop. If sewing machine was switched on with the small hoop attached, it will provide this error message about wrong hoop.

Jan 30, 2010 | Singer CE-200 Quantum Futura Computerized...

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Cindy Wells

Level 3 Expert

5062 Answers

mystery_soul

Level 1 Expert

41 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...