Question about John Deere Gilmour Traveling Sprinkler - 4010j

Ad

Hi,

You need higher water pressure...needs to have 40-60 PSI to work well.

Here is a tip about how to get **parts for your traveling lawn sprinkler** and also a great article about **how traveling lawn sprinklers work.****Traveling Lawn Sprinklers**

heatman101

Posted on May 19, 2011

Ad

Hi,

a 6ya expert can help you resolve that issue over the phone in a minute or two.

best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).

click here to download the app (for users in the US for now) and get all the help you need.

goodluck!

Posted on Jan 02, 2017

Ad

Duh! How many feet are in a yard? 3, right? A SQUARE yard is 3 feet by 3 feet. Since 3 X 3 =9, there are 9 sq. ft. in a square yard. Multiply 9 X 23 and you will have your answer!

May 15, 2017 | In Office Equipment & Supplies

Oh wow, lots of math going on here...

There are 4840 square yards in an acre and 9 square feet in a square yard (4840 x 9 = 43,560).

An acre is an old timers measurement used in agriculture...

it was 4 poles wide and 40 poles long. A pole is equivalent to sixteen and a half feet. So back then, an acre was a piece of farming land 660 feet long (220 yards or one eighth of a mile) and 66 feet wide (22 yards or one eightieth of a mile).

Acre is a measure of area, which would be square feet.

Feet are a measure of distance.

The best you could do is something like this:

An acre is 43, 560 square feet.

Draw/imagine a square or a rectangle that would cover that much area.

If it is a square, it would be (approximately) 208.7 feet on each side.

Its perimeter (the distance around it if you walk an imaginary fence around you acre-sized plot) would be 834.8 feet.

Trying to to figure out an acre of 'Circle' - hmmmmm???

Radius = 1/2 of Diameter

sorry, just can't wrap my head around this to come up with the correct equation.

maybe we can get lucky with some other brainiac taking what I did provide and come up with a solution for you?

Square - It would be 208.7 feet across if you walk across it, and the same if you walk the other way across it.

There are 4840 square yards in an acre and 9 square feet in a square yard (4840 x 9 = 43,560).

An acre is an old timers measurement used in agriculture...

it was 4 poles wide and 40 poles long. A pole is equivalent to sixteen and a half feet. So back then, an acre was a piece of farming land 660 feet long (220 yards or one eighth of a mile) and 66 feet wide (22 yards or one eightieth of a mile).

Acre is a measure of area, which would be square feet.

Feet are a measure of distance.

The best you could do is something like this:

An acre is 43, 560 square feet.

Draw/imagine a square or a rectangle that would cover that much area.

If it is a square, it would be (approximately) 208.7 feet on each side.

Its perimeter (the distance around it if you walk an imaginary fence around you acre-sized plot) would be 834.8 feet.

Trying to to figure out an acre of 'Circle' - hmmmmm???

Radius = 1/2 of Diameter

sorry, just can't wrap my head around this to come up with the correct equation.

maybe we can get lucky with some other brainiac taking what I did provide and come up with a solution for you?

Square - It would be 208.7 feet across if you walk across it, and the same if you walk the other way across it.

Apr 11, 2015 | PetSafe Wireless Fence System For Dogs &...

Square feet is calculated L x W so 10x10 would be 100 sq. feet, Cubic feet is calculated by L x W x H so 15 x 14 x 9 = 1890 cubic feet

Feb 22, 2015 | Microwave Ovens

You can devide it up how you want. 675 squar feet is like having 675 one foot by one foot squars so a room that is 10 foot in one direction and 10 foot in another is 100 square feet so 6 of those would be 600 square feet and say a room that was 7.5 foot by 10 foot would be 75 foot

Feb 14, 2015 | Office Equipment & Supplies

It equals zero square feet.

Linear feet is only one dimension (length). You need 2 dimensions to calculate square feet. In other words, you need *width* also.

But IF you're asking how many square feet is 9 linear feet (long)*by* 9 linear feet (wide), then the answer is 81.

Linear feet is only one dimension (length). You need 2 dimensions to calculate square feet. In other words, you need *width* also.

But IF you're asking how many square feet is 9 linear feet (long)

Jul 23, 2014 | Building Materials

The strength of the signal is proportional to the SQUARE of the distance, e.g., 1 foot == 100%, 2 feet == 25%, 5 feet == 4%.

Move the router and the computer closer together, with fewer signal-blocking walls between the two devices.

Move the router onto the same floor (basement, main, upper) as the device.

Move the router and the computer closer together, with fewer signal-blocking walls between the two devices.

Move the router onto the same floor (basement, main, upper) as the device.

Sep 10, 2013 | Linksys E1200 Wireless Router - Ieee...

Ash fault? I think you mean "asphalt" but that's OK. You haven't given enough information to solve the problem, but here's what you need to do.

You know the area of the roof is 300 square feet (sq ft). You should know the area of each asphalt shingle, although that's the information you didn't give. When you know that figure, the calculation is very simple:

number of shingles needed = area of roof / area of one shingle

I don't know if this is a class problem, or if you really have a roofing job. Don't forget that on a real roof, the shingles overlap. If you do the calculation, the number you get is right only if you lay the shingles edge-to-edge. A real-world roof would need probably twice that number. Shingles come packed in bundles, and they usually tell you the area they cover. (By the way, 100 square feet is termed a "square".)

You know the area of the roof is 300 square feet (sq ft). You should know the area of each asphalt shingle, although that's the information you didn't give. When you know that figure, the calculation is very simple:

number of shingles needed = area of roof / area of one shingle

I don't know if this is a class problem, or if you really have a roofing job. Don't forget that on a real roof, the shingles overlap. If you do the calculation, the number you get is right only if you lay the shingles edge-to-edge. A real-world roof would need probably twice that number. Shingles come packed in bundles, and they usually tell you the area they cover. (By the way, 100 square feet is termed a "square".)

Apr 28, 2011 | Canon P23-DHV Calculator

We know that 1 yard = 3 feet , and 1 square yard = 3^2 square feet = 9 square feet. We then take 573 x 9

which is 5157 square feet.

which is 5157 square feet.

Mar 16, 2011 | Office Equipment & Supplies

Hi Becca,
You haven't given me much context to go on here, but this probably means an area 10 feet wide by 10 feet long, which is 100 square feet. If this is about a liquid (like glue or paint) then this is equivalent to any other shape of the same area, like 5 feet by 20 feet, etc.
I hope this helps you.
Al K

Apr 30, 2010 | Black & Decker Tools & Hardware - Others

It sure sounds like the out side condenser fan has gone out.If you need to Fix a water hose to run on it like a spray fanning out over the out side coils(condenser)and try and see if it will cool.It will do the trick,until you get it fixed on week days.If I can help,let me know.>>>roniecon@gmail.com

Aug 16, 2009 | Goodman CLQ36AR49 Air Conditioner

658 people viewed this question

Usually answered in minutes!

×