Question about Sanyo Xacti VPC-S770 Digital Camera

1 Answer

The camera lens is sticking out when camera is off. when you press the on switch the sanyo logo and sound come on and the camera shuts off immediately

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i switch camera to face away


I am assuming that you are talking about a cell phone with a front and back lens. If you are seeing yourself on the screen there is a little camera logo in the upper right corner of the screen, press this logo and it should switch to the forward facing lens.

Dec 18, 2014 | Cameras

1 Answer

Camera wont turn on


your lens is not interacting with the power sequence if you turn turn on the camera and the message is displayed (switich the camera of and on again) then its mean that your camera lens is pressed either by your self or accidently the lens housing is malfanctioning

Feb 29, 2012 | Sanyo Xacti S650 Digital Camera

1 Answer

Sanyo S770 lens won't retract on shut off and shuts down when try to zoom and get lens error


Lens error happens during the lens guide pin wrong movement. Please try these below and let me know.
1. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.
2. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.
3. Try turning the camera with the lens facing down and shake to dislodge anything stuck
4. Try removing batteries and memory card, wait 5 minutes and refit the battery only.
5. Now turn on camera( with out card ) and see ,if working then fix the memory card & again turn on the camera. If working then fine . Otherwise format the memory card and fix back in camera again & try. Make sure before format the memory card take a back up all photos in your computer then format. If no luck then reset or restore the camera setting by pressing Menu key for 2 sec .. in not done the press both Menu & self time key for 2 - 4 sec.
i hope it will gives you success. Thanks & Before you leave, if you have found my information helpful and if you haven't already done so then please press the ACCEPT button, this is how I am paid for helping you today. POSITIVE feedback & bonus is appreciated

Feb 06, 2011 | Sanyo Xacti VPC-S770 Digital Camera

6 Answers

Switches on and switches off immediately


I had the exact problem. After searching online for multiple solutions, the following worked for me... Press and hold the power button while at the same time use your fingernail to pick and pull at the lens assembly. Pull the lens assembly at the circular ring gap between the housing and the barrel of the lens itself. It only took me about 3 to 5 tries to get it to work. It's been working fine ever since. Good Luck.

Jun 14, 2009 | Sony Cyber-Shot DSC-S500 Digital Camera

1 Answer

Sanyo E-1075 When turned on it shuts right off.


Your lens may need adjusting. This info may help . Other People solved problem. Lots of Info on this link.

http://www.fixya.com/support/t102982-e_18_problem

Mar 22, 2009 | Sanyo VPC-E760 Digital Camera

1 Answer

My sanyo vpc-e760 digital camera is showing lens error:22 what do i do


well i have a SANYO camera and every time i cut it on it cuts on a little bit and i see it and it sais lens error: 308 what does that mean?

Oct 08, 2008 | Sanyo VPC-E760 Digital Camera

1 Answer

Lens Errors 17 & 27 on Sanyo VPC-E760


My camera was showing lens error 12&25 and then shutting off. I tried gently trying to twist and pull the furthest out part of the lens and it popped back into place easily. It made a noise when it did this, and then i turned the camera off, and the lens went back in!! Completely fixed now!!

Aug 03, 2008 | Sanyo VPC-E760 Digital Camera

1 Answer

Buzzing sound, wont come on!


Don't try and manually push in the lens at first...the buzzing is a warning letting you know that something is wrong with the camera. By accidently removing the batteries during shut down you interupted the shut down sequence. Try and turn on the camera and immediately press the play button on the back. This should reset the camera. If not and if you are under warranty it needs to be serviced. If you are not under warranty then you can try and push the lens down. Don't use a lot of force but try and gently do it.

Jun 09, 2008 | Cameras

4 Answers

FUJI FINEPIX S7000


Try it with a different set of battery. It is possible that one of your battery is "dead" or close to it, and the camera shuts down.

You have to find the bad battery.

It worked for me.

Jan 22, 2008 | Fuji FinePix S7000 Digital Camera

Not finding what you are looking for?
Sanyo Xacti VPC-S770 Digital Camera Logo

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Cameras Experts

kakima

Level 3 Expert

102366 Answers

ray gallant

Level 3 Expert

41458 Answers

The Knight
The Knight

Level 3 Expert

73647 Answers

Are you a Sanyo Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...