Question about Sony Cyber-shot DSC-W50 Digital Camera

1 Answer

When i turn on power the word "ACCESS" appears on the screen for 5 seconds. then the words, turn the power off and on again, appear with a beep and a flashing orange light near the view finder. I can look through the dsaved pictures and use the menu functions, but cannot take new pictures.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It says improper shut down then freezes up and turns itself off


First make sure your PS3 is powered off and unplugged.
1. Plug your PS3 in.
2. Now hold you power button on the ps3 down, you will hear one beep, followed by another 5 seconds later, and a third one 5 seconds after that. After that the PS3 power light will turn red. You can now let go of the button.
3. Hold your power button down again, you will hear one beap, followed by another beep 5 seconds later, and then you will hear a double beep 5 seconds after that. After you hear the double beep, let go of the power button.
4. Now some words will come up on the screen saying to connect your controller.
5. You must connect your USB cord to your ps3 and connect the other end to your controller.
6. A selection menu will now appear.
7. Select the option "3. Restore File System" and press X.
8. Now follow the on screen dialog and once the restoration has completed your PS3 will be back to normal.

Please note: Following this guide will leave your Game Data and Save Files intact, you do not need to worry about this process deleting your Save Files or any other data. Your ps3 will be just like it was before it messed up.

Feb 27, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

The PS3 starts with the logo and the "waves" and


This is a problem with the Playstation 3 software becoming corrupt. It is very easy to fix if you follow my simple steps.

Please note, this method will erase your hard drive so any save games you had will be lost. All your online trophies will be preserved.

Step 1.

Turn your Playstation 3 off into standby mode (red light on)

Step 2.

Press and hold the power button. The Playstation 3 will beep when you first press it, then beep again 5 seconds later and then beep once more and turn off back into standby mode (red light on). You must now release the power button.

Step 3.

Press and hold the power again. The Playstation 3 will beep when you first press it, beep again 5 seconds later then there will be 2 quick beeps together. When you hear these 2 quick beeps release the power button.

Step 4.

Your Playstation 3 will now start up with a screen asking you to connect a controller via USB. Connect your controller and then press the PS button.

Step 5.

A menu will now be displayed on screen. Select option 5 "Restore PS3 System". This will then ask you to confirm that you wish to go ahead with the system restore. Accept whatever the Playstation 3 says.

The Playstation 3 will now go through the system restore process and re-install the system software back to out of the box status. You will have to set your user name, date and time and network settings again.

Once you have completed the above, the Playstation 3 will restart and spring back to life again!

I hope this helps.

Jan 09, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

When i powered on my PS3 a red screen appears saying a "Serious problem has occurred. Contact you technical support". I am out of warranty. I formatted the hard disk of the PS3 from my laptop,...


How to Access Playstation Recovery Menu


1. Turn off Playstation®3.

2. Hold The power button down; The system will turn on and turn off once again.

3. Once the System has been shutdown, re-press you finger until you hear 2 consecutive beeps

4. When you hear the 2 beeps take finger off power button.

5. You will be promted to plug in your controller via usb and then hit the PS button

6. The Recovery menu will pop up.




you can try some of the options from this menu if your ps3 will allow you to bring it up i really hope this helps you out


Nov 20, 2010 | Sony Playstation 3 (PS3) Console

1 Answer

When I turn my PS3 on, my background screen appears but nothing else loads, not even the numerous areas (Settings, network etc.) all that appears is an icon in the upper right hand corner saying "Press the...


you can try doing this cuz i had the same problem till i did this...Access the PS3 recovery menu
1. Turn off Playstation®3.
2. Hold The power button down; The system will turn on and turn off once again.
3. Once the System has been shutdown, re-press you finger until you hear 2 consecutive beeps
4. When you hear the 2 beeps take finger off power button.
5. You will be promted to plug in your controller via usb and then hit the PS button
6. The Recovery menu will pop up.
..I did this and i got my ps3 Back !! :)

be patient and wait for those beeps.. they are important

Jun 30, 2009 | Sony Playstation 3 (PS3) Console

3 Answers

Error message


my camera did the same thing, lens retracts 3 or 4 times, and then proceeded with an error message "turn off and on again". I pressed the power button probably about 10 times, didn't work, so then i gave it a good smack on the top of the frame a few times while repeatedly pressing the power button and it did the trick. Hasn't gave me problems since...hope it helps

Mar 29, 2008 | Sony Cyber-shot DSC-W70 Digital Camera

2 Answers

Turn the power off and on again....this is what appeared after i download some pictures to my computer for the first time. When I do this the same words appear on the screen and I am unable to take any...


If this error message appears, turn off the camera and remove the batteries for 30 seconds. Afterwards, reinsert the batteries and turn the camera back on. Perform a manual reset of the camera.

Aug 24, 2007 | Sony Cyber-Shot DSC-S40 Digital Camera

Not finding what you are looking for?
Sony Cyber-shot DSC-W50 Digital Camera Logo

449 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Cameras Experts

kakima

Level 3 Expert

102366 Answers

james laughton
james laughton

Level 3 Expert

2023 Answers

JonSnell Electronic
JonSnell Electronic

Level 3 Expert

20195 Answers

Are you a Sony Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...