Question about Sport & Outdoor - Others

1 Answer

We have had this treadmill for a number of years and had not been using it much in past year. We now wish to begin using it again but am wondering if I should oil it. Need to know type of oil and locations on treadmill where this should be done

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,675 Answers

Hi Bernard well this will depend on what model it is, is it electric? or is it just a friction type? if it is a friction type, a little wd40 just around the bearings should loosen it up a bit try not to get any on the underside of the belt as this could make it slip on the rollers, but if it is electrical, there is no need to lube it at all as these have heavy duty sealed bearings in which are lubricated inside, so really there isn't much to really do to them or it should i say, hope this helps please vote and rate tanks

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ticking sound on horizon t101 treadmill


If you wish to get some details about treadmill repair; visit the site linked here. in the search tab put the world "ticking" and search.
http://electro-medical.blogspot.com/

Jan 06, 2017 | Horizon Exercise & Fitness

1 Answer

I have an old kettler LCD 6K tradmill.The safety key has snapped in the machine.can it be replaced? the treadmill keeps stopping so wondered if this was a safety mechanism


A magnetic read switch is used as the safety switch in treadmill. And the key you use is magnet. First of all try to by a new key and the check. Sometimes the magnetic property can change after years of use and can lead to such problems that you are facing now.

http://electro-medical.blogspot.com/

Sep 27, 2016 | Kettler Exercise & Fitness

1 Answer

What year is a mercury 35hp outboard motor with serial number2491265.Is the motor 2 or 4 stroke


the serial number begins 2487558 and continues past 2491265 and as the beginning serial number denotes the year , your engine is 1969 model
it shows as a 2 stroke with auto oil injection
check the heads
if the plugs are in the flat of the head and there are no rocker covers it is 2 stroke
talk with a mercury /mariner service center

Sep 25, 2016 | Mercury Mariner Starter, Outboard, 35-40...

1 Answer

Console working but treadmill not moving


Same thing happens to my treadmill a few times a year, and this is how I got mine working again. I went outside to my main electricity breaker box and reset all the switches. Turn them off then on again. And then did the same thing to my small breaker that's on the wall in my house. Walla...It's working back to normal again!

Oct 07, 2015 | Nordic Track T9.1 Treadmill Walking Deck...

1 Answer

Hello, Our Precor 9.21si begins slipping after walking or running a few minutes. Seems to be worse the faster you go. After about 1 mile, the house fuse blows. What troubleshooting steps do you thi


This really sounds like the results of long term use without lubrication or wax between the belt and deck. Chances are you will need to replace the running belt and the deck or flip the deck if it has not already been done. The friction builds up between the deck and belt and caused the electronic components to overheat. The machine is shutting down as a precautionary measure. It will do this only so many times before the electronics are zapped. Start with the deck and belt. Hopefully the electronics are okay. With your model and serial number, you can visit our website and view the products we have available for your particular machine.
Precor Repair Parts for 9 21s 9 21si Treadmills Consumer SPORTSMITH net

Feb 03, 2013 | Precor Treadmill 9.21 9.21s 9.25 9.21si...

1 Answer

Proform Treadmill 785 E suddenly stops during highs speed workout


Use 2000W converter instead of 750W because you are using your treadmill on its full power on high speed. 750W converter is not capable of handling its full load resulting the machine malfunctioning. Your treadmill 785E have 2.25 CHP motor, 2.25 CHP is equal to 1677.824712W and 20-Amp minimum Ac outlet is required for your treadmill in order to function in full capacity. Download user's manual on: https://www.sportsmith.net/images/product_support/ProForm/PFTL785081%20-%20PROFORM%20I%20SERIES%20785%20E%20TREADMILL/PFTL78508.1-274823.pdf See Horse Power to Watts Converter on: http://www.rapidtables.com/convert/power/hp-to-watt.htm

785e specifications-dfydxumns33ohqc3bsmt22yf-2-0.jpg

Apr 16, 2017 | Proform Exercise & Fitness

1 Answer

Wondering the year my GG-grandmothers sewing machine was mfg.


The singer site has a list of most of their early serial numbers with the dates but I dont know about other makes

May 24, 2010 | Singer 7436 - INGENUITY

1 Answer

After storage treadmill belt wont' turn


Hello. A year without use often causes the belt to adhere to the front and rear drum. Pry the belt loose and toss some talcum powder in there to get it going again. Joe

Mar 21, 2010 | Dmm Vision Fitness T9500 Treadmill

2 Answers

Message in the display "err 2" and my kettler treadmill doesn't work


Hi Rendra,

Try this:
Switch the treadmill off and then on again.
Push the "minus" speed button and the "stop" button simultanuously.

If all is well you will now have entered the maintenance mode.

Next push the "plus" speed button and the "stop"button smultanuously.
Now you you've reached the error mode.

Push the "plus" or "minus" speed button to browse the error codes untill you've reached "L er".
The push start to erase the message.

Turn the power off and then on again to restart the treadmill.

With any luck the error has disappeared and the treadmill will function again. If not.....you'll have to contact Kettler.

Btw...This error occurs when the belt is "pushed" by the runner. For example when you put weight on the handlebar and the push your feet backwards.

May 10, 2009 | Exercise & Fitness

Not finding what you are looking for?
Sport & Outdoor - Others Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sport & Outdoor - Others Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Sport and Outdoor - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...