I have a toro personal pace lawnmover and I have 2 problems. 1.My mower does not pick up the grass clippings very well. 2. my mower mowes uneven it leaves like stripes the the wheels are both on the same setting.

when was the last time the blade was sharpened, sharpening the blade, improves cutting and mulching.

The likely cause of this is that the grass is too high for your mowers deck. You should try just mowing about 1/3 of the blade at a time (if you can) until you reach your desired length, so if you grass is 6" high, only take off about 2" at first to reduce the stress on your mower. Set your mower deck to it's highest setting and give it a shot.

Also, be sure that the blades are sharp, and if you don't have mulching blades, you should get some! Grass this high will leave long clippings on the lawn which can suffocate the grass, mulching blades will chop up the clippings into smaller pieces, which is beneficial for your lawn!

Finally, make sure you aren't mowing wet grass. If you mow when the grass is wet the clippings can stick together and clump up under the mowing deck which will cause excess strain to the mower and maybe even cause it to shut off.

If none of this works, you may want to use a string trimmer to remove the first two inches of your grass and then continue mowing as normal!

Hope this helps! Happy Mowing!

carburetor needs cleaning and rebuilding

sounds like you have a lose blade ,pulley or belt.

Insert the rear plug if mulching is desired. The key to mulching is to mow the lawn frequently.You want to keep the mower deck height high enough to cut the grass and allow the mulching blades to work, but just low enough to actually cut the grass in a smooth uniform height. To low of a cut setting will clog the mower and create a mess. 2 times a week is a good frequency to start with.

Ensure the slots are not filled with grass clippings before installing the bagger.

Sounds like a piston ring or valve issue. If it is still under warranty, I'd think about a return.

there is a product called mowease that you apply to the blade and mowing decked after a good cleaning. it helps keep the grass from adhereing to the deck

what is happening is there is tomuch grass in deck & not discharging as fast as it cuts it if deck is ajustable put it on high setting then try if it works then got back over it with a lower setting this is most likely the case to much grass in deck while mowing blade gets cought up alot with alot of grass in deck