Question about Linksys Wireless-G WRT54GS Router (e125894)

2 Answers

Install to computer without disk because i lost it,and blinking power light

Posted by on

  • Doug Hudson May 11, 2010

    can you be a little more specific about you problem

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 197 Answers

If you dont have a cd then go to www. linksys.com and click on contact us and chat with a tec from linksys they may be able to send you a link

Posted on Jun 02, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 77 Answers

Hi!

Yes, please be specific with your problem so that we can try an help you.

Blinking power light means that there's a possible problem with your router's firmware. You just need to hold and press the reset button for about 30 seconds with its power still on. After that, unplug its power and leave it for 2 mins. Power it on again and check the Power light. If it's still blinking call Linksys techsupport for further assistance. If not, then you successfully fixed the problem. ;-)

www.linksys.com/kb --> their knowledgebase

Hope this helps!

Posted on May 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beeps red light hp pc


The blinking should be in a pattern.

Power Green On (S0) Computer on
Power Green 1 blink every 2 seconds (S1) Suspend Mode
Power Green 1 blink every 2 seconds (S3) Suspend to RAM
Power Green Off (S4) Suspend to Disk (if applicable)
Power Clear Off (S5) Computer off
Power Red 1 blink followed by 2-second
pause - Repeat
Power Supply failure
Power Red* 2 blinks 1 second apart CPU thermal shutdown
Power Red* 3 blinks 1 second apart CPU not installed
Power Red* 4 blinks 1 second apart Power supply overload (crow bar)
Power Red* 5 blinks 1 second apart No memory
Power Red* 6 blinks 1 second apart No graphics
Power Red* 7 blinks 1 second apart System board failure (detected prior to video)
Power Red* 8 blinks 1 second apart Invalid ROM
Hard Drive Green Blinking Hard drive activity
*Blinking

Aug 17, 2013 | HP Computers & Internet

1 Answer

Can not get the mac pro osx 10 5 8 to start with the utility disk or with regular start up my on pilot lite keeps blinking


Put the Mac install disk back in. Try pressing command-option-escape to force quit. If nothing happens, then press command-control-power to force a restart. If that doesn't work, press and hold the power button for five seconds or so until the computer shuts down. Power up the computer again, and hold the option key so you can select the instal disc for startup. Run Disk Utility again. Sometimes you get a tangled file reference that requires several tries to undo - this could be calling the sleep routine instead of what it's supposed to do.

May 28, 2013 | Computers & Internet

1 Answer

My Itb lacie firewire usb2 doesn't powerup. no blue light. the adapter green light keep blinking when connected to the drive, but if you un plug it from the drive the adapter light stays without blinking.


An external storage-device has four major components:

* the USB cable

* the power-adapter

* the disk-drive inside the enclosure

* the USB-to-disk-drive adapter inside the enclosure.

One of these components has failed.

Try a different USB cable.

Try connecting to a different USB port on your computer.

Try connecting to a USB port on a different computer.

Take a "multi-meter" and measure both the voltage and amperage output from the AC adapter, and compare with the specifications on the label on the adapter.

Open the enclosure, and remove the disk-drive, and then connect it as a "slave" disk-drive in a desktop computer, to see if it works at all.

Purchase a new, compatible, disk-drive, and install it in the enclosure, to "revive" your external storage device.

Get the part-number and serial-number from the label on your disk-drive, and access the manufacturer's web-site, and use "check warranty status", to see if they will replace the device, at minimal cost to you.

There exist commercial "data recovery" services that can try to repair your device, just long-enough to rescue and copy your files. For example, see: https://services.seagate.com/index.aspx?lng=en-US for a "no data - no charge" guarantee.

Dec 11, 2010 | LaCie Big Disk External USB 2.0 1TB Hard...

3 Answers

Lost install disk


You don't even need the installation disk! Just do these easy steps:
Plug in your PC directly to your router. And make sure it is turned on. Also plug in your MODEM into the routers modem port.
On your computer open up Internet Explorer. Then in the address box type in: routerlogin,net
User: admin Pass: password
if password for the password does not work then just leave the box blank. Then just complete the steps.
If this works or if you need help then PLEASE email me:
pmt47@comcast.net
email me wither it works or not!

Feb 23, 2010 | NetGear WNR2000 Wireless Router

2 Answers

Lost install CD for Canon PIXMA MP160


all you have to do is download the install software from canons website. it's free and easy.

Mar 01, 2009 | Office Equipment & Supplies

1 Answer

Need the installation disk


hello,

Ok try to hook and see if the system install it without a installation disk.

If this not resolve, then you have to find driver at lexmark websites.
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

may this help.

melnavz

Jan 23, 2009 | Lexmark X6570 InkJet Printer

1 Answer

Power lite blinking


The power light stays on when you start a computer. If it is the hard disk that works, it blinks once in a while. There may be a misconnection of the wires in the front panel of your desktop. You can check by seeing to it that the wires match those in the mainboard of your computer. Consult your computer mainboard manual for the location of the corresponding terminals for your front wires (e.g. hard disk wire into the corresponding hard disk terminal in the mainboard).

Nov 10, 2008 | E-Machines eMachines Desktop PC

1 Answer

Lexmark X1240


Yes you install without the disk ,first you need to click here
then type X1240 you get option lexmark X1240 ...and then choose the OS and download the driver file and install in on your computer ......


Good luck.....

Nov 05, 2008 | Lexmark X3470 All-In-One InkJet Printer

1 Answer

Lost my installation disk


Here is the driver download page:

Lexmark Z640 - Drivers & Downloads
Download the software into your computer, locate downloaded files and start installation program.
Start installation with printer USB cable unplugged, plug when required by software setup.

Vote the solution.

Thanks

Aug 15, 2008 | Lexmark Z600 InkJet Printer

1 Answer

Lost my installation disk


HER THE LINK http://driverscollection.com/?file_id=36029 THIS Will fix it.. dont forget im a genius.....

Feb 11, 2008 | Lexmark Z645 InkJet Photo Printer

Not finding what you are looking for?
Linksys Wireless-G WRT54GS Router (e125894) Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18358 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...