Question about Speed Queen ATS90AWN Front Load Washer

1 Answer

Fabric softner dispenser

The Fabric Softner will not dispense, it stays in the dispenser after load is complete. Is there something that I need to clean out periodally?


asaling@glendaleaz.com

Posted by on

  • gbsy Jul 26, 2008

    Same problem on a LG wd12230fb,dispenser all clean,can`t see any water coming out at all,the other two draws work ok.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 172 Answers

Start by cleaning the dispener, pull the dispenser out the owner manual should show you how to do this.

Take the cover off and clean and rinse the dispenser out, reassemble.

If this doesnt help let me know, there may be other problems.

Posted on May 08, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get the agitator to come out the fabric softner dispenser is filthy and all needs to be cleaned


Hello,

By grasping just the fabric softner dispenser and wiggling it from side to side while pulling up the softner dispenser will come out to be cleaned.


GENE

Oct 13, 2011 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

The fabric softener is clogged with dried up fabric softener on my Whirpool Washer. How can I get it cleaned out?


You really cant take them apart without breaking the dispensers. Fabric softner is basically wax and fragrance. Add very hot water to the dispenser to melt the fabric softner. In the future, water down the fabric softner.

Feb 13, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

3 Answers

The fabric softner release has stopped working


Most likely the fabric soft dispenser is clogged . this happens when you wash alot in cold water the left over fabric softner get very pasty and can clog it up. You can try filling the dispenser with hot water and run a cycle with hot water this should unclog the dispenser .

Nov 26, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

2 Answers

Maytag MAH8700AWW will not dispense fabric softener


u need to replace the water valve theres 2 the cold is what u would replace

May 21, 2009 | Maytag MAH8700AWM Neptune Front Load...

2 Answers

Fabric softner dispenser


Small brush and plain water. Rub, flush, repeat...

If it's clogged where you can't get a brush, pour very hot water into it. Last resort would be blowing it out with an air compressor...

May 07, 2009 | GE Profile WPRE6100G Top Load Washer

2 Answers

Fabric softner is building up in dispenser


Same deal - I have to soak up all the residual water in the softener dispenser between washes. (The detergent and bleach compartments are fine).

Jun 13, 2008 | GE WSXH208A Front Load Washer

1 Answer

Fabric Sofner won't dispense


hi there remove the soap drawer then remove the cover over the softener compartment you will more than likely find a blockage in the cover siphon or the down tube on the drawer

Feb 29, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Fabric softner


Remove the dispenser tray. Inspect the area just above the fabric softener portion of the dispenser. There should be a series of holes where water feeds into the tray during the rinse cycle. Sometimes these holes become clogged with fabric softener residue. If the holes are clogged, water will never dispense the fabric softener out and it will stay in the tray. If you take some cotton swabs and meticulously clean all the holes out, I bet your problem will go away. Let me know if this was helpful to you.

Oct 05, 2007 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Fabric Softner won't dispense


fabric softener goes into the dispenser. it may be a full blown solenoid valve -or- a flapper type of solenoid valve. operation of the solenoid operates a flapper to let the softener out. go to an appliance repair site to find the solenoid - appliance parts dot com or repair clinic dot com.

Sep 04, 2007 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Speed Queen ATS90AWN Front Load Washer Logo

415 people viewed this question

Ask a Question

Usually answered in minutes!

Top Speed Queen Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Speed Queen Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...