Question about LG CHOCOLATE VX8500 Cellular Phone

1 Answer

Display inop the screen is blank all the time...

Posted by on

  • pslizzle May 05, 2008

    my phone randomly turned white (the screen) and no matter what i do it wont change. the battery pack seems fine the thing hasnt turned red so its not water damage, and i cant imagine how it would have gotten smashed or damaged in any way today.

    PLEASE HELP im going to get a new phone and not getting a chocolate ever again because this is the second time tomorrow, unless it starts working by tomorrow. ADVICE, HELP, SOLUTIONS email at pmista@gmail.comĀ 

  • broadsword13 May 11, 2008

    Thanks, I just took the phone back today for a replacement...they could not offer any explanation for the problem.

    Appreciate the reply...



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Well what you experienced is a common thing with the chocolates. I have gotten 8 replacement chocolates, and everyone has done the same thing. There really is no hope for these, and it upsets me a little that no one can explain why they constantly have issues, and can't be fixed. Hope this isn't too late.

Posted on May 11, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I am looking for the A/C fuse for a Ford mustang gt 2002

manual system

  • Blown fuse(s):
  • Battery junction box (BJB) F26 (65A).
  • Central junction box (CJB) F33 (20A), F36 (7.5A), F37 (10A), F39 (20A), F45 (15A), F47 (15A), F58 (10A) or F59 (7.5A).
  • Blower motor inoperative.
  • A/C compressor inoperative.
  • Disconnected electrical connectors.
  • Engine cooling fan inoperative.
  • Damaged control switch(es) or climate control panel.
  • Circuitry open or shorted.

Electronic Automatic Temperature Control Module Self-Test
  • NOTE: The vehicle interior and exterior temperatures should be between 10° - 32.2°C (50° - 90°F) when carrying out the self-test. If the temperature is not within the specified range, false in-vehicle temperature sensor DTCs will be displayed.
    The EATC module self-test will detect concerns in the system control functions and will display hard diagnostic trouble codes (DTCs) in addition to continuous diagnostic trouble codes for concerns that occur during system operation.
  • The self-test can be initiated at any time. Normal operation of the system stops when the self-test is activated.
  • NOTE: The key must be in the RUN position to enter the self-test.
    To enter the self-test, press the OFF and floor position buttons simultaneously and then press the AUTOMATIC button within two seconds. The display will show a pulse tracer around the center of the display window. The test may run as long as 30 seconds. Record all DTCs displayed.
  • If any DTCs are retrieved during the self-test, proceed to Electronic Automatic Temperature Control (EATC) Module Diagnostic Trouble Code (DTC) Index.
  • If a condition exists but no DTCs are retrieved during the self-test, proceed to Symptom Chart.
  • To exit self-test and retain all continuous DTCs, push the blue (cooler) TEMP button. The module will exit self-test, retain all continuous DTCs and then turn off (display blank).
  • To exit the self-test and clear all DTCs, press the defrost button. The display will show 888 and all function symbols for one second. The module will then turn off (display blank) and all DTCs will be cleared.
  • Always exit the self-test before turning the EATC system off.
  • Continuous DTCs will be deleted after 80 ignition switch ON cycles after a continuous condition occurs.

Mar 28, 2011 | 2002 Ford Mustang

1 Answer

When start up the screen is blank, nothing happens

Press the F2 key several times to make sure that the screen brightness is up.
Put your ear down on the laptop on the zone left of the trackpad and below the keyboard and listen for the little whirring and clicking noises of the hard drive. If it is making noises, just walk away for at least 30 minutes and see what happens in that interval.
Look carefully at the screen in good light and make certain that here is no image on it. You could just have a bad backlight.
If so, you can connect the DVI port on the MacBook to a computer monitor or most flatscreen TVs and regain access to the screen until you get the backlight repaired.
You might try that regardless. Even if your display is totally inoperative, the DVI port may still function.
If the drive has stopped making noise and the screen is totally blank, 1. Try starting up the MacBook with the DVD that came with it, and if that doesn't yield anything, 2. Take the MacBook to the Apple Store and ask for a Genius appointment.

Oct 16, 2009 | Apple Computers & Internet

2 Answers

My outside temp & clock LEDS are blank

One of the little lights needs replacement in your dashboard.You can flip off the dashboard and take off the lights one by one.If you found the broken one replace it with a working one and try.

Jul 07, 2009 | 1999 Mercedes-Benz E-Class

1 Answer

ViewSonic VA720 Screen displays briefly then goes blank.

it looks like the Inverter's gone in your screen, it works like a starter in a florescent tube, it 'kick starts' your screen to come on. Turning it on/off many times eventually 'kick starts' your screen and makes it come on eventually.

Jan 15, 2018 | ViewSonic VA720 17" LCD Flat Panel Monitor

1 Answer

Volumn inop,remote inop

sounds like the vol down button has stuck try agitating it ..good luck farr64

Apr 29, 2009 | Symphonic ST420FF 20" TV

1 Answer

White blank screen

<Fn> + <F6> Screen blank
Turns the display screen backlight off to
save power. Press any key to return.

Dec 30, 2008 | Acer Aspire 4315 Notebook

1 Answer

Sporatic problem with Stereo and Stereo Display

I have had this problem intermittently since I purchased the vehicle in 2004... the dealer could not fix but showed me that there is a relay that you can pull and re-install. It's under the hood and must be done with the ignition and lights off. Pull the relay, wait 10 secs and re-install and pblm goes away. If you are standing in front of the vehicle there is a relay box on your right/vehicle left. The relay is located in the lower left-had corner of this box. Not a permanent fix, and in my experience the problem goes away when the vehicle is parked for an hour or so but if you have a long drive and want to use the radio, this 60-second fix is worth knowing...

Oct 25, 2008 | 2004 Dodge Durango

1 Answer

Nokia 6126 screen not showing

the problem is in display...better change ur display and use it...

Sep 19, 2008 | Nokia 6126 Cellular Phone

1 Answer

Blank Screen on my main display

You need to chance the strip in side the mobile. or else we need to change the display.

Feb 25, 2008 | Nokia 7390 Cellular Phone

Not finding what you are looking for?
LG CHOCOLATE VX8500 Cellular Phone Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Raphael Josiah

Level 2 Expert

86 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Are you a LG Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides