F04 Error code on display, VCR shuts down and displays this message.

You need to find out what that particular error code means and address that particular issue. It could be something very simple but frustrating, just the same..

Search for:
Make Model error code F04

Miele fault code f04 Ovens Questions & Answers - Fixya

www.fixya.com > Forum > Tags > fault code f04 > Ovens

Miele ovens fault code f04 related questions and answers. ... Can't use my Meilepyrolitic oven fault 90 I turned it off at the main power source and then ... fault 23 is displayed on the control panel after using teh self clean function on our miele ...

[PDF]USE & INSTALLATION MANUAL - Smeg

www.smeg.com.au/smeg_au/docs/user_manuals/DOA330X.pdf

Smegelements or interior surfaces or racks of the oven during or immediately after use. During the oven ..... locked automatically due to self-clean mode. "USER LOCK" is ...These codes are displayed when the electronic control detects a ...... The ovens feature a pyrolytic self-cleaning function ..... F03 or F04 Error appears.

[PDF]user manual e:line built in ovens - Appliances Online

manuals.appliancesonline.com.au/epee63cs/epee63cs.pdf

You seem to have a K-mech model. If this is the case f04 means that the mechanism locks unloading. The cause being something to do with the loading motor.

You have a K Mech model. F04 is the code for "Mech locks during unloading". The cause of this is the Load Motor Timing.
You can get service information for the K-Mech from service manual site ESI. It was free when I download it last. Also it gives instructions on how to get trapped tapes out!
Any problems getting hold of it let me know.

Error code F04 means pressure switch jammed on empty.
Do the following.
Remove lower rear panel of washer.
Remove large black hose on bottom of drum.
Remove and clean filter inside the hose.
Remove the hose on to the pump, and check for blockage or obstruction here as well.
Please rate my solution.
Thankyou.

F04 is "loading lock". most likely problem is that the timing of the gears in the tape loading mechanism is mis-timed.

Your vcr seems to use the K Mech. F04 Means that the mechanism locks unloading.
The cause of which might be the loading motor timing.
F09 means No serial clock linking IC2004, IC7005 and IC7701.

This F04 code means that the cassete carriage has been pushed out of alignment due to the toys being inserted into the machine. It may have lost total power due to a safety component eg a fuse blowing. This would need a service repair person to fix it as the cassette carriage may also have got damaged and would need repaired as well as the carriage alignment having to be re-timed.

Looks like the Loading cage gears Timing has got messed up. If you are worried about taking it to a Repair Shop, take it to the company service centre.

Panasonic K deck F03 or F04 shows in display check loading motor coupling pt no VDP1434 or motor pt no VID12128 £11.95 CHS