Question about Car Audio & Video

1 Answer

ONCE I'VE ENTERED RADIO STATION FREQUENCY,HOW DO I SAVE IT?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 2,226 Answers

For most radios select which preset you want to save it to and press and hold the switch for 3 or 4 seconds.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program memory for radio stations


Scan until you find a station you like and remember the frequency, carry on until you find another station any station, put in the first frequency and quickly press and hold the button that you want to save it too until the unit beeps. Carry on for the rest of the buttons. Generally with the FM there are two sets of presets, one for each time you press the FM button. The display will usually show FM1 and FM2.

Jan 16, 2016 | Car Audio & Video

1 Answer

How to program the radio in a 96Lincoln continental after battery was disconnected


Hi,

Here is the link to the owners manual which you can download if you wish:

http://owner.ford.com/servlet/ContentServer?pagename=Owner/Page/OwnerGuidePage&year=1996&make=Lincoln&model=Continental

Here/below are the specific instructions on the radio programming (pg. 159 of above link).


Good luck & please flag if "HELPFUL". Thanks!

(from section) Luxury Audio System


Selecting the AM or FM frequency band

Push the "AM" or "FM1/FM2" button to select the desired frequency band. Pushing the "FM1/FM2" button more than once will alternate between FM1 and FM2. These functions are used with the station memory buttons described under How to tune radio stations.

HOW to tune radio stations

There are four ways for you to tune in a particular station. You can use the "TUNE", "SEEK", 'SCAN"or memory buttons.

• Using the "TUNE" function:
You can change the frequency up or down one increment at a time by Pressing and releasing either the left (< arrow/up) or - right (> arrow/down) side of the "TUNE" or "TUNE DISCS" button. To change frequencies quickly, press and hold down either the right or left side of the button.

Manual tuning adjusts your radio to any allowable broadcast frequency, whether or not a station is present on that frequency. (See All About Radio Frequencies in this section.)

• Using the "SEEK" function
: Press the right *) side of the "SEEK" button to select the next listenable station up the frequency band. Press the left (.4) side of the button to select the next listenable station down the frequency band. By holding the button down, listenable stations can be passed over to reach the desired station. Pressing the "SCAN" button will begin the scan mode up the frequency band, stopping on each listenable station for approximately five seconds. To stop the scan mode on the presently sampled station, press the "SCAN" button again.

Setting the station MEMORY PRESET buttons
: Your radio is equipped with 6 station memory buttons. These buttons can be used to select up to 6 preset AM stations and 12 FM stations (6 in FMI and 6 in FM2)

1. Select a band, then select a frequency.

2. Press one of the memory buttons and hold until the sound returns and the lamp above the memory button lights up. That
memory button is now set.

3. Follow the above steps for each memory preset button.

NOTE:
Custom memory presets can be recalled using the keyless entry system. See Memory Profile System in the Features chapter.

Using the Automatic Memory Store feature ("AUTOSET")
: If the memory buttons have been set, either by using the Auto Memory Load feature or if you have set them manually, the system is prepared tolet you use a convenient feature called Automatic Memory Store.

With Auto Memory Store, you can continually set strong stations into your memory buttons without losing your originally set stations. Your radio will automatically set your memory buttons to the strong local stations.

Activate Auto Memory Store by pushing the "AUTOSET" button once. Your radio will set the first six strong stations of the band you are in (AM, FMI or FM2) into the memory buttons. The display will flash "AUTO" and display the autoset icon "A" while the stations are being set in the memory buttons.

NOTE: If there are less than six strong stations in the frequency band, the remaining unfilled buttons will store the last strong station detected on the band. After all stations have been filled, the radio will begin playing the station stored on memory button 1.

To deactivate the Auto Memory Store mode and return to the manually-set memory button stations, simply push the "AUTOSET" button. Display will show "AUTO" then "OFF". The next time Auto Memory Store is activated on that band, the radio will store the next set of six strong stations.

Nov 23, 2014 | 1996 Lincoln Continental

1 Answer

How come my pro-84 scanner wouldn't hold the mrn frequency last weekend in richmond. Kept getting an error message. pressed hold, entered the station 454.000 and then hold again and kept getting error...


454.000 is not a station, but a frequency. it is 454 Mhz. or 454.000 Khz.
If no station is transmitting on that frequency, the scanner only will produce a hiss. Check the manual, to see how you can put in a frequency, just to monitor. Put the sq, so you just don't hear the noise and wait till any transmitter will use that frequency.

May 06, 2014 | Radio Shack Pro-84 Handheld Scanner

1 Answer

How do I avoid 27.145 MHz Radio Frequency controlled toy car affect by other toy car with the same frequency? Thx


If there is more than one Radio Controlled (RC) devices operating on the same radio control frequency operating in the same proximity - there's going to be an issue for one or both devices.
Simple, inexpensive RC devices operating on the same frequency have no way of being "paired" (like a bluetooth device to a phone) to a particular controller (more expensive devices and controllers have sophisticated ways to get around this limitation by setting codes that allow the device to respond to only the matching controller). You would need to have both the control and device on a new frequency that is different from other RC devices to retain control of the device - otherwise once the device gets close enough to the other controller - it will begin responding to it instead of yours.

In order to use your RC device, you'll need to remain closer to your device than the other controller is. This makes your controller's signal more powerful and should overcome the more distant controller signal. Keep in mind that your range of control will be reduced as the signal suffers from interference from the other controller - much like driving in your car listening to the radio that has 2 broadcasters on the same frequency. While close to home, you hear your local station clearly - but as you get further from the local station, there is an area where the signal from the other station overlaps with your local station - making understanding what is being broadcast by either station completely unintelligible. You have to tune away or shut off the radio until you're closer to one station or the other. Had there been no second station on the same frequency - or had been travelling in a different direction, you might have been able to listen to your local station for the whole trip. The same holds true for your RC device. In an open area alone - you may have control for 200 feet. But in an area with another RC controller operating on the same frequency as yours, that distance may plummet to just 50 feet. The more distance there is between RC controllers and devices competing for the use of the same frequency - the better the experience will be.


I hope this helps and good luck!

Feb 12, 2013 | Toys

1 Answer

How do you set stations and clock


1.Select the radio band and tune in a desired radio station you wish to store in the preset memory.
2 .Press and hold any one of the Preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks.
3. Press the Preset button into which you wish to store the station while the frequency display is blinking (within 5 seconds). The display stops blinking once the station has been memorized. The display shows the band, preset No. with a triangle (9) and station frequency memorized
http://vault.alpine-usa.com/products/documents/OM_CDM-7854.PDF is link to full manual

Mar 03, 2011 | Alpine CDE-7853

2 Answers

2007 vw jetta radio code please!!!


Send the request via email through this site these guys can help or go back to dealer and get them to get it for you.
http://autoforum.classifieds1000.com/Volkswagen-Quantum/2007_VW_golf_radio_code
Below is procedure once you have the code:

* Turn on radio -- the word "SAFE" will be displayed.

* First press the MODE button and then press the SCAN button and hold them down simultaneously until "1000" appears in the frequency display. Release the buttons. Do not, under any circumstance, continue holding the buttons down or press them once again. This would cause the radio to take the number "1000" as the code number.

* Using the first four radio station buttons, enter the code number found on your Radio Card. Use button 1 to set the first digit of the four digit code, button 2 to set the second digit, etc. The first digit of a four digit code must be "1". If your code number has three digits, the first digit on display must be set blank.

* Once the code is shown on the display, press and hold the MODE button and SCAN button simultaneously until the word "SAFE" appears in the frequency display. Release the buttons. A radio station frequency will automatically be displayed. The radio will now play once again.

If, when cancelling the electronic lock-up, a wrong code number is entered by mistake, the word "SAFE" will appear in the frequency display first blinking, and then continuous.

You can now repeat the entire cancelling procedure but only once. The number of attempts will be shown in display.

If the wrong code number should be entered again, your radio will be locked up for approximately one hour. The radio will not play. Leave the radio switched on. After an hour, you can cancel the electronic lock-up as previously described.

This cycle, two attemps - one hour lock-up continues again. //

May 30, 2010 | 2007 Volkswagen Jetta 2.5 Sedan

2 Answers

I need the mercedes benz 1999 clk 430 radio code


AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

  1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
  2. The code number for the radio is advised to you on the enclosed CODE CARD.
  3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
  4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
  5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.
AR82.60-P-7502-01B Coding Radio
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)

  1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
  2. The code number for the radio is given on the enclosed CODE CARD.
  3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
  4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
  5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

Dec 17, 2009 | 1999 Mercedes-Benz E-Class

2 Answers

Pioneer deh4000ub radio wont save


Six stations for each band can be stored. 1 Press LIST.
Preset screen is displayed.
2 Use MULTI-CONTROL to store the selected
frequency in memory. Turn to change the preset number. Press and hold to store. You can also store the frequency in memory
by pushing and holding MULTI-CONTROL right.
3 Use MULTI-CONTROL to select the desired
station. Turn to change the station. Press to select.
You can also change the station by pushing MULTI-CONTROL up or down.
To return to the ordinary display, press BAND/ESC or LIST.


Jul 18, 2009 | Pioneer DEH-400UB Car CD/ MP3 Player

1 Answer

Setup radio presets


1. Navigate to your favorite station
with the UP/DOWN buttons.
2. Press MEMORY once. The
preset choice will go to the next
available one.
3. Within 5 seconds, press
MEMORY again to save the
current frequency as a preset,
or else use the UP/DOWN
buttons to fi nd another preset
number, then press MEMORY
to save it.
4. The UP/DOWN buttons usually
tune the frequency, but when
loading the presets, they navigate
the presets.

Jan 15, 2009 | Nakamichi SoundSpace 5 Shelf System

3 Answers

Setting presets on KLH R3100


No, not so easy, this isn't like your average car radio, unfortunately. This was driving me nuts, too, but I finally found a manual. Hopefully you have a remote, since that is needed.

Once you are on the station you want to save, press MEMORY on the remote. MEMORY will blink on the receiver's display. While MEMORY is flashing, press the button(s) on the remote for the number you want to save the station under.

Neil

Sep 28, 2007 | KLH R3100 Receiver

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4836 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Are you a Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...