Question about Hoover U5753-900 WindTunnel Bagless Upright Vacuum

1 Answer

Wont pick up

The vaccum will not pick up small particles. I have checked suction and cleaned unit. Seems like it picks up for e second, then stops. I take it back apart and have good suction at the nozzle and on the bottom and the brush is turning. Still will not pick up.????

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mine was doing this soon after I bought it. I had to cut the strings, and hair off the brush...cleaned the filter (plastic one) and then it seemed to do better. I still have problems with it getting clogged in the tube once in a while...I usually take a broom stick and push it through...I also have a Kirby, I tell ya I am thinking of spending the money to have it fixed because these cheaper ones aren't very good.

Posted on May 05, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My vacumn won't pick or suction up and bag is not full. I cleaned out the hose checked and belt running I have no other answer please help. It's an upright lux guardian


The output filter on that unit is HEPA and traps all particles. You need to clean or replace that filter because the airflow cannot leave through it and it wont develop suction.

Feb 06, 2015 | Vacuums

2 Answers

My Dyson absolute vaccume has no suction. I have cleaned the filters, visually checked all of the hoses. there is no suction from the floor brush or the wand.


Check the ducting that goes from the floor pick-up into the machine, fluff etc often clogs the elbow. Check the pipe that plugs into the floor pick-up as well, it could be clogged further up.

Jan 28, 2011 | Dyson DCO3 Absolute Bagless Upright...

1 Answer

It wont pick up with a new bag in and it seems to **** back in


Check if there is something stuck in the the suction tube, telescopic wand or in any of the parts involved. I had the same problem due to a number of chocolate wrappers stuck in the wand. I almost went and bought another one, luckily i had the sense to ask the salesman at sears the same question and he put me on the right path. The suction tube and wand are detachable from the unit, so you should be able to unplug the parts and check. This is the same solution if you motor is running fine but you have lost suction and\or bag shows full when it is not. Hope i am saving someone some money by stating the obvious here, just the way the sears salesman helped me.

Nov 07, 2009 | Kenmore Magic Blue 24195 Bagged Canister...

1 Answer

Not efficiently picking up anything, suction seems to be low


In my experience, you have a clog somewhere between the floor and the bag or what ever catches the dirt. Push something through all hoses. Look at all filters. Try running the machine (outside) while it is open to check the vaccum power.

Sep 07, 2009 | Panasonic MC-V7398 Upright Vacuum

1 Answer

Dirt devil swivel glide - no suction


check the filter gauze on the unsud of vack where bag is if this is blocke you will not have vacuum as there will not be ventilation thro this filter should be able to feel blow of air from this vent when vacuuming up hope this helps good luck from uk !

Nov 02, 2008 | Vacuums

1 Answer

Loss of suction, loud blowing noise


Hi.

Try cleaning out the vortex this will sort out poor suction.

http://dysonmanuals.llc.nu/

Oct 16, 2008 | Dyson DC07 Bagless Upright Cyclonic Vacuum

1 Answer

No suction


have u checked all of the filters. I know that when not all the filters r clean the machine will turn on but then it will sound louder and still have no suction. Most times there is a filter under dirt container thats sits above motor and if this filter is not clean the motor cannot breath. Thus no suction

Sep 29, 2008 | Hoover U6630-900 WindTunnel Bagless...

1 Answer

Vaccum has no suction


Here is what we did to fix the problem of our vacuum having no suction.
We unscrewed the three screws on the back and took the hose off of the vacuum.  Then we took the hose outside and put the water hose through the vacuum hose and turned on the water.  After about 30 second the water pushed through a dust bunny the size of a fist and a marker.  Basically, the vacuum did not have suction because the hose was clogged with dust, etc.  After reassembling the vacuum, it worked just fine.  

May 11, 2008 | Kenmore 34923 / 34925 Progressive Bagged...

Not finding what you are looking for?
Hoover U5753-900 WindTunnel Bagless Upright Vacuum Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hoover Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Roger Potts

Level 3 Expert

694 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

Are you a Hoover Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...